[ 386.4 alpha Build(s) ] Testing available build(s)

[aex.perez]

Not sure if this is related to this build, or whether it exists in prior builds. But go into the AImesh section of the menu. After it loads, try moving the mouse across the menus and the submenus appear UNDER the AImesh picture / nodes. cleared browser, tried Firefox, Chrome, Edge - same issue...

Example:

 

[AntonK]

Not sure if this is related to this build, or whether it exists in prior builds. But go into the AImesh section of the menu. After it loads, try moving the mouse across the menus and the submenus appear UNDER the AImesh picture / nodes. cleared browser, tried Firefox, Chrome, Edge - same issue...

Example:
View attachment 35768

Do you use scMerlin?

 

[ras]

Mine is not running so good. It keeps crashing.
Attached the the syslog file with crash info.

 

[Jack Yaz]

Not sure if this is related to this build, or whether it exists in prior builds. But go into the AImesh section of the menu. After it loads, try moving the mouse across the menus and the submenus appear UNDER the AImesh picture / nodes. cleared browser, tried Firefox, Chrome, Edge - same issue...

Example:
View attachment 35768

this is an scmerlin addon issue, not firmware related

 

[unsynaps]

Here is to hoping for a GT-AXE11000 build.

... if nothing more than to get rid of the god awful 1337 G@m3R UI.

Red all over and GRAY TEXT ON A GRAY BACKGROUND. Someone needs to be run over by a 2 year old in a dukes of hazard power wheel.

 

[Unisoft]

Aug 11 was last test build. Does this gap mean that Merlin is cooking up a meaty next test build (like a GPL source integrated)?

The suspense....

 

[Clark Griswald]

Aug 11 was last test build. Does this gap mean that Merlin is cooking up a meaty next test build (like a GPL source integrated)?

The suspense....

Don't mention upcoming releases. You're going to ruin the surprise!

 

[Unisoft]

Just being hopeful that Asus have resolved the ongoing issues Merlin spoke about....

 

[RMerlin]

Nothing at all going on right now.

 

[shabbs]

Ride that uptime baby!

 

[AntonK]

Ride that uptime baby!

Yes! There's an upside to all this, and that upside is uptime!

 

[alchemy]

Alpha's been running great.
No rush RMerlin, thanks for all you do!

 

[Clark Griswald]

Alpha's been running great.
No rush RMerlin, thanks for all you do!

+1

 

[BloodFX2021]

Ax88u just noticed something, don't know if it a alpha problem or common problem.

My vpn client settings never seem to be remembered, its set to start vpn client on boot, but it never does, always have to activate it manually.

Weird thing is on a manual reboot it seems to work and reboot scheduler is enabled, it reboots earlier hours of morning, wondering if its related to that?

 

[Howard_inGA]

So here is some more VPN weirdness that resulted in Nord VPN shutdown when run from the router...

Aug 23 21:44:15 ovpn-client1[2751]: --cipher is not set. Previous OpenVPN version defaulted to BF-CBC as fallback when cipher negotiation failed in this case. If you need this fallback please add '--data-ciphers-fallback BF-CBC' to your configuration and/or add BF-CBC to --data-ciphers.

Aug 23 21:44:15 ovpn-client1[2752]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

Aug 23 21:44:15 ovpn-client1[2752]: WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1618', remote='link-mtu 1634'

Aug 23 21:44:15 ovpn-client1[2752]: WARNING: 'keysize' is used inconsistently, local='keysize 128', remote='keysize 256'

Aug 23 21:44:16 ovpn-client1[2752]: WARNING: You have specified redirect-gateway and redirect-private at the same time (or the same option multiple times). This is not well supported and may lead to unexpected results

Aug 23 21:44:19 ovpn-client1[2752]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this

Aug 23 22:44:15 ovpn-client1[2752]: WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1618', remote='link-mtu 1634'

Aug 23 22:44:15 ovpn-client1[2752]: WARNING: 'keysize' is used inconsistently, local='keysize 128', remote='keysize 256'

Aug 23 23:44:15 ovpn-client1[2752]: WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1618', remote='link-mtu 1634'

Aug 23 23:44:15 ovpn-client1[2752]: WARNING: 'keysize' is used inconsistently, local='keysize 128', remote='keysize 256'



MANY MORE ENTRIES LIKE THIS, THEN INTERNET ACCESS FAILED WITH THESE ENTRIES:



***d inconsistently, local='link-mtu 1618', remote='link-mtu 1634'

Aug 24 17:44:17 ovpn-client1[2752]: WARNING: 'keysize' is used inconsistently, local='keysize 128', remote='keysize 256'

Aug 24 17:48:20 dnsmasq[2799]: Maximum number of concurrent DNS queries reached (max: 150)

Aug 24 17:48:29 dnsmasq[2799]: Maximum number of concurrent DNS queries reached (max: 150)



Turned off the Nord VPN, and internet access restored?? Ideas?

 

[RMerlin]

All of these warnings are perfectly normal, or just logging quirks in OpenVPN itself related to their implementation of NCP.

IF you cannot route Internet traffic, then it means you probably did not configure your client to redirect Internet traffic.

 

[Howard_inGA]

...these warnings are perfectly normal, or just logging quirks in OpenVPN itself related to their implementation of NCP.

IF you cannot route Internet traffic, then it means you probably did not configure your client to redirect Internet traffic.

I do have all traffic routed through the VPN, but this is the thing that's new and I've never seen:
'Aug 24 17:48:29 dnsmasq[2799]: Maximum number of concurrent DNS queries reached (max: 150).'
When that item dropped into the log, that's when the internet traffic stopped?

My VPN Client settings that I think applicable are:

​

Accept DNS Configuration	Strict
Redirect Internet traffic through tunnel	Yes (all)

 

[RMerlin]

You have a dns-related issue, causing a backlog of queries to fill the limit of 150 concurrent queries.

 

[JohnNerd]

What's the difference with this build and Merlin if any? Could not find the answer to this question...

 

[kernol]

What's the difference with this build and Merlin if any? Could not find the answer to this question...

Answer is in the 1st post of this thread.
http://www.snbforums.com/threads/386-4-alpha-build-s-testing-available-build-s.74186/

This IS a Merlin build - but it is ALPHA - so strictly for testing - not intended for production environments.