ASUS AX11000 - Wifi Site Survey

[dkasseb]

Anyone know why the Wifi Site Survey only lists your own APs? I am not sure why it wouldn't pick up the neighbors. Is it defective? Or do I have to configure something. Thanks!

 

[RMerlin]

Make sure you enable data collection on the settings page.

 

[Edmundo Ford]

If you do what RMerlin told you, you will see all the stats.
THe same happened to me.

 

[Makaveli]

Make sure you enable data collection on the settings page.

I have this working on 2.4 but for 5ghz I get this message below

Unable to perform scan.Showing cached results

 

[RMerlin]

I have this working on 2.4 but for 5ghz I get this message below

Unable to perform scan.Showing cached results

No idea. Wifi Insight is a closed source application from Broadcom.

 

[gehx]

I have this working on 2.4 but for 5ghz I get this message below

Unable to perform scan.Showing cached results

I get the same thing on RT-AX88U

 

[eJC]

This only recently started happening for me too.... it happens on the 5 AND 6 gHz channels, but the 2.4 continues to operate as it always has.

 

[karlfoley]

I have this working on 2.4 but for 5ghz I get this message below

Unable to perform scan.Showing cached results

Just updated to 386.5_2 and I'm getting this on RT-AX86U as well. I suspect it's been like this for the last few versions.

 

[karlfoley]

This only recently started happening for me too.... it happens on the 5 AND 6 gHz channels, but the 2.4 continues to operate as it always has.

Interestingly, I just revisited the WiFi survey page and although the error is still there, I AM seeing results:

 

[karlfoley]

Interestingly, I just revisited the WiFi survey page and although the error is still there, I AM seeing results: View attachment 40376

Ah, I think I've narrowed this down a bit further. The error has gone and the only channel I can see that is missing is my own, running at 160MHz. All the visible APs are running with either 20, 40 or 80 MHz. The 160MHz is missing.

 

[Makaveli]

Just updated to 386.5_2 and I'm getting this on RT-AX86U as well. I suspect it's been like this for the last few versions.

I actually just checked this since you quoted my post and I got the alert and its working fine for me now on 5Ghz

 

[spacemanspiff]

I still seem to get nothing at all with 5ghz network. 2.4 is working ok, but even with data collection started and running for the last 48 hours, I can't see any other 5ghz radios and I get the 'Unable to perform scan.Showing cached results' error