Beta Asuswrt-Merlin 386.1 Beta is now available

[Slawek P]

Nah, I know which file I downloaded. It is easy to read before you hit upload.

Hey, I had the same when upgrading from beta2 to beta3 my main main AX88U router. Re-applied again and it worked.

 

[octopus]

Hereby:

Share Anything with pCloud

With pCloud's unique Download Link feature you can share files with everyone. Click to download. Join pCloud.com and get up to 20GB FREE cloud storage.

u.pcloud.link

Share Anything with pCloud

With pCloud's unique Download Link feature you can share files with everyone. Click to download. Join pCloud.com and get up to 20GB FREE cloud storage.

u.pcloud.link

I have removed username/password


AC86U, full reset without backup file.

When adding a second client failed, I rebooted. After reboot, the VPN client with the 2 policy entries worked. Then I disabled the VPN client again and this happened:

VPN errors - Pastebin

Pastebin.pl is a website where you can store code/text online for a set period of time and share to anybody on earth

pastebin.pl

This: "WAN_Connection: ISP's DHCP did not function properly." causes the entire internet to break and a restart is the only option.

Try to remove "route 0.0.0.0 0.0.0.0" from custom config and restart Client.

 

[Slawek P]

Dirty upgrade from beta2 to beta3. AiMesh node first, followed by the main router (5 sec after aimesh node showed 100% comoplete).
The main router failed first time, but after I disconnected usb (forgot first time round) and re-applied image everything works fine.

 

[Vimes]

Updated from a very stable 384.19 to the latest beta 3 firmware for my AX88U, using a VPN client and policy routing.
All went well, no reset applied as all seems fine.
All 40 plus clients connected and port forwarding etc, all working as expected.
Alexa also connected with router control, as previously.

Many thanks Eric for your long and continued support with your enhanced firmware, most appreciated.

EDIT...

Noted these within the log.....

Dec 29 12:27:20 ovpn-client1[7280]: WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1542', remote='link-mtu 1558'
Dec 29 12:27:20 ovpn-client1[7280]: WARNING: 'keysize' is used inconsistently, local='keysize 128', remote='keysize 256'

but resolved with a new generation of the config file used from my VPN supplier. Just posting that if anyone else notes the issue.

 

[Treadler]

Seeing this every 5 minutes on 386.1 beta 3.

Dec 29 22:21:17 rc_service: dhcp6c 22455:notify_rc restart_ddns
Dec 29 22:21:17 custom_script: Running /jffs/scripts/service-event (args: restart ddns)
Dec 29 22:21:17 custom_script: Running /jffs/scripts/service-event-end (args: restart ddns)

I don't use ddns. Everything running well, just the log spam every 5 minutes (shrug).

 

[bradbort]

Confirming the same problem I had last night when updating my AX88u to beta 3. I updated from the current stock firmware ASUS has for this router. I had previously used Merlin's beta 2 with no issue.

When I update to beta 3, all clients say they connect in the router GUI. They seem to be connected on the client side as well. The router says it is connected to the internet (both LED and GUI). Nonetheless, I lose connectivity to the internet on all clients. Rebooting clients and router does not help. Resetting to the latest stock 386 firmware from ASUS

resolves the issue.

I'm attaching as screen shot of the log file in case that is helpful.

 

[jimmyD30]

Hey, new guy here, so let me know if I'm not being complete with my feedback.

Updated to 386.1b3 on AC1900P (using AC68U firmware) with factory default restore and using as an AP. Not getting anything on Internet Traffiic graph (zero traffic being shown) on System Status view and USB3.0 is no longer picking up my SSD (USB2.0 is). And possible connectivity issues, still sorting that one out. No addons being used.

Otherwise thank you RMerlin for your efforts, 384.19 release worked well (no issues as noted above).

 

[dmtg]

Confirming the same problem I had last night when updating my AX88u to beta 3. I updated from the current stock firmware ASUS has for this router. I had previously used Merlin's beta 2 with no issue.

When I update to beta 3, all clients say they connect in the router GUI. They seem to be connected on the client side as well. The router says it is connected to the internet (both LED and GUI). Nonetheless, I lose connectivity to the internet on all clients. Rebooting clients and router does not help. Resetting to the latest stock 386 firmware from ASUSView attachment 28901 resolves the issue.

I'm attaching as screen shot of the log file in case that is helpful.

I solved restart the node RT-AX58U, RT-AX56U, RT-AC1900U after restart the nodes restart the main router rt-AX88U.

 

[ollimoe]

I solved restart the node RT-AX58U, RT-AX56U, RT-AC1900U after restart the nodes restart the main router rt-AX88U.

I tried multiple restarts of Router an clients wihtout success - the clients show as connected yet no internet access. Also tried to re-apply FW without success. As stated before I do not use AiMesh

 

[Kees17760]

Beta 3 is running fairly smooth on my AC2900 (incl. Client networks 1 on 2,4 and on 5 GHz)
Strange thing is CPU temperature, it's reads about 15 degrees Celsius higher than it did on 384.19 without workload. Wifi temps seem OK.

 

[Frost]

HTTPS Wrong place mybe?

The RT-AX86U has installed Version: 3.0.0.4 384_9318 and upgraded to Merlin 386.1_beta2. A factory restore(Initiaize all--) was done and later a reboot. All connections are wired, and the router worked well as expected(Had an old AC86U).

HTTPS was done by “How to enable HTTPS and create a certification--- 2020/12/13)” and Notepad as adviced.
When I did the reboot, I lost the secure state? When I tried again, the electric power was lost at cert.tar position.
Now I get to cert.tar and cert.crt(with the whole certificate opend) in Notepad. No reaction with double click cert.crt as the first time.

The PC has istalled Windows 10 x64 (2004 and 20H2).

Yes, I do need some good advice how to solve this mess.

Regards
Frost

 

[skeal]

@RMerlin On my AX88U when I click the "view list" button on the network map page to display connected clients and it causes an internet connection drop, my video playing on the TV pauses for a few seconds and then starts back up. I checked the log and there's nothing. Also I have connected wireless clients that show in the off line client list but are connected and working. I have a AC68U as an access point running 384.19 and it shows all my connected clients properly. I know you haven't started on bugs yet I just thought I would say the problems above were also present in the beta2.

 

[jozsiszfvar]

RT-AC86U beta 3 clean install from original 3.0.0.4.386.40451, reset all reconfigured.
I found that the CPU temperature is approx. 10-15 C higher.
Instead of the usual 65-70 C it is now 75-85 C.
Is this a bug?

 

[bradbort]

I solved restart the node RT-AX58U, RT-AX56U, RT-AC1900U after restart the nodes restart the main router rt-AX88U.

Restarting did not solve the no internet problem for me. I have no nodes. Just one router.

 

[bradbort]

I tried multiple restarts of Router an clients wihtout success - the clients show as connected yet no internet access. Also tried to re-apply FW without success. As stated before I do not use AiMesh

I'm having the same problem

 

[shabbs]

RT-AC86U beta 3 clean install from original 3.0.0.4.386.40451, reset all reconfigured.
I found that the CPU temperature is approx. 10-15 C higher.
Instead of the usual 65-70 C it is now 75-85 C.
Is this a bug?

I just checked my two AC86U's
- CPU: 57°C - this one is in my garage, which is currently 5°C, so staying cool
- CPU: 79°C - this one is in our spare bedroom on the 2nd floor and is in line with your observation

 

[Slawek P]

Seeing this every 5 minutes on 386.1 beta 3.

Dec 29 22:21:17 rc_service: dhcp6c 22455:notify_rc restart_ddns
Dec 29 22:21:17 custom_script: Running /jffs/scripts/service-event (args: restart ddns)
Dec 29 22:21:17 custom_script: Running /jffs/scripts/service-event-end (args: restart ddns)

I don't use ddns. Everything running well, just the log spam every 5 minutes (shrug).

I see it only once at very early stage of the startup

May  5 06:05:27 rc_service: dhcp6c 2121:notify_rc restart_ddns
May  5 06:05:27 custom_script: Running /jffs/scripts/service-event (args: restart ddns)

 

[Gar]

B3 working great on my state-of-the-art AC88, thanks again!

 

[Slawek P]

I noticed frequent

asus kernel: br0: received packet on eth7 with own address as source address

Quick forum search indicates it has been observed on other firmware versions in Nov/Dec 2020.

 

[jakey]

Not sure if it's just the dirty flash on my RT-AX58U from Beta 2 but I don't see the SpeedTest tab in Adaptive QoS. If I go directly to the AdaptiveQoS_InternetSpeed.asp URL, I can use it now but I need to type the URL to get to it,

Same with my AX58U, just bookmarked the page for the time being.