What's new

Release Asuswrt-Merlin 386.1 is now available

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Status
Not open for further replies.
I have an AX88U as main node and 3 x Lyra Mini mesh nodes. Stable so far with AX88U on Merlin 384.19 and Lyra's on stock 384_46249.

Main reason for upgrade will be guest support on nodes. Can I get this now, is the new FW available for Lyra also?

Many thanks!
 
Only issue /I have is that my Synology (link aggregated) no longer agreed with dhcp, I worked with a manual address though. Any thoughts? Rebooted router and unify managed switch. Worked flawless under 314.19?
 
I had trouble setting up AIMesh today, after trying everything suggested in this forum I still couldn't find my node(AC68U). After a long thought about my process, I figured the problem may be that the access point I want to change into a node needs to be set as a router again before reset to factory defaults. Any further opinions and thoughts appreciated.
 
You can download the Asus Firmware Restoration tool in the App Store.
Good to know. I have installed that app just in case I need it in the future.

FWIW, I did a full reset on my router. After that I was able to upload the new release firmware.

Then it took a while to manually configure all my settings. Glad I downloaded the VPN server cert stuff, that meant I could upload it after the reset and update and not have to change or re-issue the .ovpn files for my client devices.

I think I have everything configured properly now, including my ad hoc DNS based ad and tracker blocker that needs some files in jffs

nvram and jffs are a lot less full than before the full reset and upgrade. I guess I had a bunch of cruft in there that was causing issues.
 
Only issue /I have is that my Synology (link aggregated) no longer agreed with dhcp, I worked with a manual address though. Any thoughts? Rebooted router and unify managed switch. Worked flawless under 314.19?

I had the same issue with my Nas. Had to set a static IP.
 
Is it only me or has the Web Gui always been like this?
WebGui.png
 
Last edited:
I have great results with AImesh on Rt-AX58U main and 2 RT-AX58U nodes BUT all the iphones and Samsung note 10+ are set now to phone mac (Samsung) and have Private Mac address (Iphones) turned off.
Yep I have the private Mac off. Running the AP has always worked well for me so I don’t feel I’m missing much with Aimesh.
 
I upgraded yesterday and quickly noticed a bump in CPU temperature. About 9ºC higher on average with an active cooling.
1612309993614.png

There was no actual demand change.

Before updating it was lower and more stable.
1612310092607.png
 
I had trouble setting up AIMesh today, after trying everything suggested in this forum I still couldn't find my node(AC68U). After a long thought about my process, I figured the problem may be that the access point I want to change into a node needs to be set as a router again before reset to factory defaults. Any further opinions and thoughts appreciated.
Make sure WPS is turned on sometimes its not start. Its needed to no pair master with node(s). Turn it off when its used. Gld.
 
Did a dirty update yesterday from 384.19 to 386.1. Took an hour for GUI to appear after login, be patient. Cleared my browser cache. Worked fine for about 16 hours, then WAN access stopped. Did hard resets on all 3 devices and reconfigured (RT-AC86-U with two RT-AC68U AiMesh nodes). Basic vanilla setup, no extras. Stable so far today, fingers crossed.

Note: Donated a few bucks to RMerlins's tip jar, hope others do the same in support of this awesome product! Not sure what percentage of his time he spends on this, but it must occupy his head a lot. Plus taking some arrows for ASUS issues he has no control over.
 
hello to all
dirty upgrade. everything seems to be good so far. except for a couple issues:

*log is getting bombarded with
Code:
Feb  2 19:52:28 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:52:28 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:53:03 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:53:03 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:53:03 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:53:03 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:54:05 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:55:05 RT-AC3100-0548 kernel: nvram: consolidating space!
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_out: no handler for ioctl 0xd:0x4
Feb  2 19:56:04 RT-AC3100-0548 kernel: udb_ioctl_copy_in: no handler for ioctl 0xd:0x3

*bandwidth stats. please look at feb 2nd stats. is there any way to fix it without deleting past data?

1612313801079.png

*
 
Last edited:
Updated my ax58u and now the console get full of this


Feb 3 02:00:16 kernel: nf_conntrack: expectation table full
Feb 3 02:00:16 kernel: nf_conntrack: expectation table full
Feb 3 02:00:16 kernel: nf_conntrack: expectation table full
Feb 3 02:00:16 kernel: nf_conntrack: expectation table full
Feb 3 02:00:16 kernel: nf_conntrack: expectation table full
Feb 3 02:00:19 kernel: nf_conntrack: expectation table full
Feb 3 02:00:19 kernel: nf_conntrack: expectation table full
Feb 3 02:00:19 kernel: nf_conntrack: expectation table full
Feb 3 02:00:20 kernel: nf_conntrack: expectation table full
Feb 3 02:00:20 kernel: nf_conntrack: expectation table full
Feb 3 02:00:20 kernel: nf_conntrack: expectation table full
Feb 3 02:00:20 kernel: nf_conntrack: expectation table full
Feb 3 02:00:20 kernel: nf_conntrack: expectation table full
Feb 3 02:00:21 kernel: nf_conntrack: expectation table full
Feb 3 02:00:21 kernel: nf_conntrack: expectation table full
Feb 3 02:00:26 kernel: nf_conntrack: expectation table full
Feb 3 02:00:26 kernel: nf_conntrack: expectation table full
Feb 3 02:00:26 kernel: nf_conntrack: expectation table full
 
RT-AC68U:
- router homepage (index.asp) would randomly lock up/unresponsive after login, have to kill the tab and try again.
- this was during ~1 day uptime dirty upgrade, then ~2 days fact. reset. till now.
 
I can’t even read this thread anymore. Drives me nuts. I don’t even know why I’m posting this. Call me crazy. o_O

EDIT: I’m over-invested in this forum and don’t adequately appreciate the onslaught of users who only appear when a new release occurs, missing all the previous alpha and beta discussions.
 
Last edited:
Only issue /I have is that my Synology (link aggregated) no longer agreed with dhcp, I worked with a manual address though. Any thoughts? Rebooted router and unify managed switch. Worked flawless under 314.19?
Raphie,
I have a Synology DS918+ connect to LAN Port 1 & 2 of my RT-AX88U. After reading your post, I decided to turn ON "Bonding / Link Aggregation" . It seem to be working. (So that you get one more data point). Hope you resolve your issue soon.
 

Attachments

  • Screenshot 2021-02-03 at 09.42.57.png
    Screenshot 2021-02-03 at 09.42.57.png
    95.1 KB · Views: 124
I can’t even read this thread anymore. Drives me nuts. I don’t even know why I’m posting this. Call me crazy. o_O

EDIT: I’m over-invested in this forum and don’t appreciate the onslaught of users who only appear when a new release occurs, missing all the previous alpha and beta discussions.
Thank you, these were precisely my thoughts as well. Where were all of these people before?
Enough already with the temperature reports (that only affected one model in fact), and was already discussed at length in the Beta thread. For those who still want to talk about that one (non-issue), please move it to a new topic.
 
I can’t even read this thread anymore. Drives me nuts. I don’t even know why I’m posting this. Call me crazy. o_O

EDIT: I’m over-invested in this forum and don’t appreciate the onslaught of users who only appear when a new release occurs, missing all the previous alpha and beta discussions.
I'm sorry for being a newbie and don't have the expertise and equipment/environment to play with alpha/beta releases. Thank you for your investment.
 
Status
Not open for further replies.

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top