IoT Devices falling off nodes (only) always requires reboot to fix

[Tech9]

it is (should be) specifically designed to work as an integrated system

It's designed to sell more ASUS routers to low knowledge users who already have one ASUS router by advertising "AiMesh Compatible" without specifiying details. Some more advanced users like you may notice the issues and complain, most won't. This type of business works well on the consumer market.

 

[jksmurf]

It's designed to sell more ASUS routers to low knowledge users who already have one ASUS router by advertising "AiMesh Compatible" without specifiying details. Some more advanced users like you may notice the issues and complain, most won't. This type of business works well on the consumer market.

Yeah, the concept is fantastic, the reality, not so much. To be fair there are simply too many variables for a one size fits all auto smart everything solution to work effectively, even with supposedly GNP and VLAN compatible groups of hardware.

Again, to be fair they do provide the tools to tweak it (and RMerlin does too) so you can get there, but for the average user I think it’s a step too far.

 

[Tech9]

Some of the limitations are hardware related. Even if you had per device power adjustment - you know ASUS routers with Broadcom hardware reboot on every change. Imagine your nodes totally disappearing for few minutes on every change during your tuning process, one by one. How long it will take and how precise it will be with this type of constant network disturbance? Your wireless clients will go crazy. With Qualcomm hardware you can do it on the fly and some home mesh systems self-adjust dynamically. Your observations are correct - with AiMesh add-on software you get higher number of check box features and lower overall user experience.

 

[jksmurf]

[EDIT1] Forgot to add, for some reason vertically orientated external antennas on the two RT-AX86U Pro nodes worked better than my normal setup of central antenna vertical and the outside ones at 45 degrees (first click). I’m neither qualified nor experienced enough to offer any explanation for this.

Couldn’t add to post above as too long ….

[EDIT2] A recent reboot had me scrabbling to get the IoTs latching on again, so I went with 2.4GHz Roaming Assistant @ -70dBm, in the Wireless Professional Tab and I also changed the 2.4Ghz control channel from channel 11 to channel 6 in the hope it was less crowded.

[EDIT3] Changed “Enable TX Bursting” from default Enable to Disable.

[EDIT4] VERY IMPORTANT. Bound specific Shelly Devices to the AiMesh Nodes that are closer and clearly have a much better RSSI. I have done tests before and after for my Shelly TRV Gateways. What seems to be happening (I have no way of proving this) is that on an Aimesh Setup with various Nodes (even Wired which mine ALL are), when the system comes up (i.e. a SYSTEM Reboot from the AiMesh Tab) the Shelly's (only on a 2.4Ghz Network) latch on to the Main GT-AX6000 Router first (which wakes up first) with a weak signal, rather than the closer RT-AX86U Pro wired AiMesh nodes; and they never seem to relinquish this connection. This happens even with roaming assist (RA) enabled @ -70dBm. If I try +65 or -67, they don't connect at all despite this being a totally reasonable figure on the MB Node (as shown by the results). So AiMesh seems to be falling down here.

Some of you may recognise that if you reboot AiMesh Main or Nodes separately, depending on that sequence, you get a different set of devices connecting with better, or worse, RSSI; or not connecting at all. I believe the reason is as above.

Before and After Results:

Master_BRM_GW (B0:81:84:E6:0D:14):
Before: -78 dBm (on Kitchen node)
After: -40 dBm (on MB node)

Living_RM_GW (B0:81:84:E3:91:00):
Before: -74 dBm (on Main router)
After: -50 dBm (on MB node)

These are the additional changes to the long post above. It’s seems all very sensitive TBH. I am concerned it just isn’t robust and the more tweaks there are the more potential for things to go awry.

 

[Tech9]

Antennas have to be vertical for one-level houses or apartments. May also work better in multi-level homes in specific environments with objects reflecting the signal.

 

[jksmurf]

I am editing and adding as I go (see above EDITs), but thought I would repeat an observation from a recent edit (EDIT4) above, as it might help other folks who are struggling to understand why AiMesh may be running them around in circles.

[EDIT4] VERY IMPORTANT. Bound specific Shelly Devices to the AiMesh Nodes that are closer and clearly have a much better RSSI. I have done tests before and after for my Shelly TRV Gateways. What seems to be happening (I have no way of proving this) is that on an Aimesh Setup with various Nodes (even Wired which mine ALL are), when the system comes up (i.e. a SYSTEM Reboot from the AiMesh Tab) the Shelly's (only on a 2.4Ghz Network) latch on to the Main GT-AX6000 Router first (which wakes up first) with a weak signal, rather than the closer RT-AX86U Pro wired AiMesh nodes; and they never seem to relinquish this connection. This happens even with roaming assist (RA) enabled @ -70dBm. If I try -65dBm or -67dBm, they don't connect at all despite this being a totally reasonable figure on the MB Node (as shown by the results). So AiMesh seems to be falling down here.

Some of you may recognise that if you reboot AiMesh Main or Nodes separately, depending on that sequence, you get a different set of devices connecting with better, or worse, RSSI; or not connecting at all. I believe the reason is as above.

Before and After Results:

Master_BRM_GW (B0:81:84:E6:0D:14):
Before: -78 dBm (on Kitchen node)
After: -40 dBm (on MB node)

Living_RM_GW (B0:81:84:E3:91:00):
Before: -74 dBm (on Main router)
After: -50 dBm (on MB node)

These are the additional changes to the long post above. It’s seems all very sensitive TBH. I am concerned it just isn’t robust and the more tweaks there are the more potential for things to go awry.

 

[Tech9]

The reasons for this are (as I understand it) due to the GT-AX6000 main router having much higher TX power than RT-AX86U Pro nodes

Not sure what you have edited, but this assumption is incorrect. There is FCC ID registration data for reference. In addition to AiMesh limited network tuning options ASUS doesn't even tell in GUI what the Tx power actually is. The adjustment steps are region dependent and may have up to 10x difference. For example Performance on 2.4GHz band in Europe is up to 20dBm, in North America is up to 30dBm.

 

[jksmurf]

Not sure what you have edited, but this assumption is incorrect. There is FCC ID registration data for reference. In addition to AiMesh limited network tuning options ASUS doesn't even tell in GUI what the Tx power actually is. The adjustment steps are region dependent and may have up to 10x difference. For example Performance on 2.4GHz band in Europe is up to 20dBm, in North America is up to 30dBm.

Ok so do you know what GT-AX6000 TX Power is vs RT-AX86U Pro and if it’s the same whether the Antenna arrangement would explain what I’m experiencing please?