New Infrastructure: Bridge and Repeater

[woodle]

Hello,

I wan't to replace my existing WLAN hardware and buy some new devices. So I have some questions how to solve my requirement and and which devices are workable.

At the moment I'm working with two Fritz!Boxes (3270 as Cable-Attached-Access-Point / 7050 as Bridge/Repeater). I have a few problems with the 3270 (WLAN not available until box-restart / after a few weeks slow connectivity on WLAN) and spend much time (even with avm support) to find the problem – but without success.

Is there a access point model, which is working an 2.4GHz for my clients / and 5GHz for the Bridging feature?

At the moment both AP working in the same Channel and I think my devices have a problem with that. But AVM needs that in my configuration. Perhaps another Problem is, that one is a 802.11g and the other only 802.11b.
I hope someone can help me and start a discussion with my about my concept.

Thanks, woodle

 

[keenanj]

the engenius eor7550 has dual radios one high power 5.8ghz or 2.4ghz and the other 2.4ghz 11n.

you can use radio 1 for the 5.8gzh backhaul and radio 2 for client AP in your application.
http://www.keenansystems.com/store/catalog/product_info.php?cPath=2&products_id=279
you will need a directional antenna for radio 1 and a 5.8gzh AP to backhaul to like the enh500