Nadonate
Occasional Visitor
Hello,
First time Poster here hoping to get some help. First my current specs:
I had an issue moving from tmobile firmware to Merlin after initial CFE update, this was resolved by flashing to Tomato > Merlin.
Since I have moved to Merlin I haven't been able to successfully forward ports.
Here are some screenshots of the relevant settings:
WAN
DHCP
Port Forwarding
Firewall
Results
Here are the troubleshooting steps I have tried:
Thanks for your help!
First time Poster here hoping to get some help. First my current specs:
- Router AC1900 [RT-AC68U]
- Firmware Asuswrt-Merlin 380.66_6
- CFE 1.0.2.1 (Asus)
I had an issue moving from tmobile firmware to Merlin after initial CFE update, this was resolved by flashing to Tomato > Merlin.
Since I have moved to Merlin I haven't been able to successfully forward ports.
Here are some screenshots of the relevant settings:
WAN
DHCP
Port Forwarding
Firewall
Results
Here are the troubleshooting steps I have tried:
- Update Merlin firmware 380.XX > 380.66_6
- Update CFE 1.0.2.0 > 1.0.2.1
- Clear NVRAM, from SSH & manually
- Enable DMZ, no change
- Disable NAT Acceleration
- Disable/enable UPNP
- Restore default settings +reconfigure
- Try different router IP addresses & DHCP ranges
- Change NAT loopback, Merlin/ASUS
Thanks for your help!