What's new

RT-AX92U set...Random overnight disconnect

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

KevinM99

Occasional Visitor
Upon waking up this morning, I noticed that my alarm system dropped off of WiFi and fell back to Cellular connectivity for a few seconds at 1:38am last night. I checked the ASUS log, and I see the following. Looks like everything was fine after midnight until 1:37am. Anyone know what the log items at 1:37 and 1:38 mean? This was the first time this has happened.

Jun 10 00:00:01 disk_monitor: Got SIGALRM...
Jun 10 01:37:25 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Jun 10 01:37:31 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Jun 10 01:37:35 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Jun 10 01:38:03 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Jun 10 01:38:29 kernel: dhd_prot_ioctl: status ret value is -20
Jun 10 01:38:30 kernel: CONSOLE: 131123.771 wl0: malformed chanspec 0x0000
Jun 10 01:38:30 kernel: CONSOLE: 131123.771 wl0: wlc_iovar_ext: chanspec: BCME -20
Jun 10 01:40:00 kernel: dhd_prot_ioctl: status ret value is -20
Jun 10 01:40:00 kernel: CONSOLE: 131213.084 wl0: malformed chanspec 0x0000
Jun 10 01:40:00 kernel: CONSOLE: 131213.084 wl0: wlc_iovar_ext: chanspec: BCME -20
Jun 10 04:34:06 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6388)]retrieve firmware information
Jun 10 04:34:06 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6405)]no need to upgrade firmware
Jun 10 04:34:35 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6388)]retrieve firmware information
Jun 10 04:34:35 WATCHDOG: [FAUPGRADE][auto_firmware_check:(6405)]no need to upgrade firmware
Jun 10 04:55:13 ahs: [read_json]Update ahs JSON file.
Jun 10 04:55:43 ahs: [read_json]Update ahs JSON file.
Jun 10 07:06:13 kernel: dhd_prot_ioctl: status ret value is -29
Jun 10 07:06:13 kernel: dhd_prot_ioctl: status ret value is -29
Jun 10 07:06:13 kernel: CONSOLE: 150629.092 wl0: wlc_iovar_ext: chanim_state: BCME -29
Jun 10 07:06:13 kernel: CONSOLE: 150629.097 wl0: wlc_iovar_ext: chanim_state: BCME -29
Jun 10 07:07:01 kernel: dhd_prot_ioctl: status ret value is -29
Jun 10 07:07:01 kernel: dhd_prot_ioctl: status ret value is -29
Jun 10 07:07:02 kernel: CONSOLE: 150676.969 wl0: wlc_iovar_ext: chanim_state: BCME -29
Jun 10 07:07:02 kernel: CONSOLE: 150676.974 wl0: wlc_iovar_ext: chanim_state: BCME -29
 
So, interestingly, I was poking around in the admin page, and all 38 wireless clients in my house are connected to my AIMesh node, and it appears nothing is connected directly to my main router (other than the AIMesh node, which is hardwired to the router). Normally, it's about 28-30 connected to the main router, and about 8-10 connected to my AIMesh node (based on house layout and client location). Wondering if the Router is having an issue, and everything is failing over to the AIMesh node?
 
So, interestingly, I was poking around in the admin page, and all 38 wireless clients in my house are connected to my AIMesh node, and it appears nothing is connected directly to my main router (other than the AIMesh node, which is hardwired to the router). Normally, it's about 28-30 connected to the main router, and about 8-10 connected to my AIMesh node (based on house layout and client location). Wondering if the Router is having an issue, and everything is failing over to the AIMesh node?

I get link down/up entries when my wired PC sleeps/wakes. I wonder which is port2 and what is connected to it.

OE
 
I took a look, and port 2 is the wired connection to the AIMesh node AX92U unit, which is odd. Now, what's even more interesting, is that my 5Ghz-2 band (which is set for AX only) is running at half speeds as before. I was hitting close to 600 Gbps with my iPhone 11's and 11 Pro's connected, now I'm only achieving 275-300 Mbps. If I move the same devices over to the 5 Ghz-1 band, I hit 350-400.
 

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top