Howdy,
Prior to the installation of a whole home PVR setup, I was getting about 400 Mbps transfer speeds with my ECB6200s. Now after the whole home setup, I'm seeing about 10 Mbps. Is there anything I can do to get my speeds back up to where they should be?
Thanks.
Installer had no idea what the ecb6200 was.
choose frequency span that is far away from that used by the whole house PVR
Pardon my ignorance, but what do you mean by "choose frequency span" (how would I do that)?choose frequency span that is far away from that used by the whole house PVR
Pardon my ignorance, but what do you mean by "choose frequency span" (how would I do that)?
MoCA devices (and the PVR devices) will generally operate in 1 of a few different 'ranges' (called bands) of frequencies on the coax. If two different systems (the PVR network and the MoCA network) are both operating on the same or overlapping frequencies, they can interfere with one another. Some devices have settings or a procedure to follow that will cause them to use different frequencies and eliminate (or lower) the chances of interference and degradation of service. You will need to determine how to go about changing the frequencies that your PVR network or your MoCA network devices operate on as part of your troubleshooting.
Thread starter | Title | Forum | Replies | Date |
---|---|---|---|---|
N | Home network setup help | MoCA, HomePlug, HPNA | 3 |
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!