bug

This is my first post as I have been using AsusWRT firmware in several Asus Routers for sometime without any issues. However recently after I upgraded my RT-AC88U from 380.68_4 to 382.1_0, I noticed what seems to be a bug. The network map client list reports a number of devices as if they are...

Hi my router updated today to the new 3.0.0.4.382.18547 firmware version, however this firmware caused the 5Ghz wifi to drop back to 20Mhz wide channels causing the devices to connect to the router at 1/4 of the speed as before. I tried factory restore and recovery mode NVRAM reset and...

RT-AC66R 380.68_4 Time on the router matches the time on the accessing computer and matches the actual time in GW -5. The parental control is set to turn access off for a specific computer at 2200. Access turns off at 2100. Set the router to turn off access at 2300 and access turns off at...

hi, my modem is running in repeater mode after this update i got some extra options in that mode ( not sure if i should have them , anyway ) now the bug i got if i go to the wireless tab i can choose betwean 5Ghz and 2.4Ghz basic is it on the 5Ghz tab if i switch it to the 2.4Ghz tab , the page...

Hi folks, adjunt a error where the bug ocurrs, i have two lan ports "actives", reboot not affec the bug still present.

Hello all, I have stumbled upong a peculiar issue, for the second time and same circustances. I have an Asus RT-AC68P with Merlin firmware 380.66_4; when I get in the Statistics Page of the Traffic Analyzer the Names of the Clients are shown as their MACs. In the LAN - DHCP Server page the...

Hi, i found out, that the Asus RT-AC68U (rev. A2) seams to have a firmware-bug if running in repeater-mode together with my Asus RT-AC88U router. Regarding the 2.4 GHz-band the RT-AC68U chooses the wrong channel (2 instead of 1), although my RT-AC88U router is set to channel 1 (using same SSIDs...

Hi, I hope this is the right place to report: I've attempted to connect to a Samba share served by an RT-68U running 380.66_2 from a Windows 10 machine, and found that I can't authenticate to the share if I used a password that contains a dollar sign ($). Replacing it with something...

Screen looks normal when you first enter it. However when you try to create a custom traffic history location the screen goes wonky after you hit APPLY. I am attaching a sample of the resulting display. The ASUS banner at the top with the status, logout and reboot buttons is gone. The first...

Hi: I post this here, instead of in the originating thread, for visibility. In my previous post #13 of thread "Can't access with SSH from the WAN my Asus AC68 with FW 380.64_2", post #13 ("Juglar, post: 323517, member: 53001", please, could anybody teach me how to link here another thread's...

I've flashed RT-AC68U_380.65_4.trx onto my AC-68U (in repeater mode) and now I can't connect to either of the 2.4Ghz and 5GHz APs (failed to get an IP), and when I connect to the parent AP (my phone's hotspot), half the time I can't access the router's admin UI. I get this error: But the other...

After filtering the router ranking by Wireless Bridge and WWAN, the resulting list displays "# of products" instead of the rank.

Hey everyone, new here. Interested in both routers and NASes. While trying to make sense of the NAS ranker, I clicked "HELP ME USE THIS" and noticed that the popup needs an update: the "Class" is no longer the NAS CPU, but the RAID type. Other updates may help too - like, what does the number...

Hi everyone. Yesterday I bought this router, everything worked more or less out of the box - I was very impressed with the GUI and the range. It then asked me to update the firmware, so I clicked OK. Still seemed to work fine. Next morning: No SSIDS visible, no connection, all dead. Tried...

Hello, I would like to have your help with the below issue. We have an ASUS RT-AC68P with Merlin Firmware v 380.65 at home. As far as I know this problem was not comming up with the ASUS latest oficial firmware. The router has a private network in 2.4Ghz & 5Ghz they are protected with a...

Hello dear fellow SNB enthusiasts! I have a puzzle for you which is keeping me busy for quite some time. I have an Asus RT-AC87U with the latest Merlin firmware. I'm using this on a (KPN) fibre connection with PPPoE configured. To provide my home with routed IPtv I have managed to configure...

Hi all. RT-AC68U with latest Merlin firmware. When trying to disable/enable or change notifications in "Infected Device Prevention and Blocking" on AIProtection page nothing happens but kicking out on login page. It happens only when coming on Router's webpage using dns name...

Asus Firmware: 3.0.0.4.380_4164 and all other I tried ASUSWRT-MERLIN: Firmware: 380.64 and all others I tried Hey guys, I am having an issue/bug with my RT-AC68U. The good thing is that I am able to reproduce it at will. The bad thing is that I can't find a fix for it. I have an Internet...

Hi all , I am using 6 different RT-AC68U (work, friends and personnal) since firmware 380.57 ( the first one I used as far as i remember) and one RTAC66U (still with 380.57) . They replaced Linksys E2000 with Tomato Shibby or DDWRT because of the better web interface design of MarlinWRT and...

Hi... I have one client PC (IP: 10.0.0.11) using the router (IP: 10.0.0.1) and I want to force it to use VPN or have no internet access otherwise. The problem is that client can still access the internet when the tunnel is down! It is like the settings have no effect at all! I searched and...