ssd

Nice deal here for an external SSD from a known/good vendor now that WD/SanDisk has had their issues... SAMSUNG T9 Portable SSD 4TB, USB 3.2 Gen 2x2 External Solid State Drive, Seq. Read Speeds Up to 2,000MB/s for Gaming, Students and Professionals,MU-PG4T0B/AM, Black (Pack of 1)...

Hello folks I have been using an Asus Rt-AC86U router for several years. For me it is very important that I can access my individual SSDs and HDs on the USB3 port individually via Samba. That's why I installed the Samba_Fixer (https://github.com/dnlongen/ASUSWRT_Samba_Fixer). It ran for years...

I have AX88U Pro router. It has a single USB port. USB 3 hub is connected to the port and 2 drives are connected to this hub: one HDD and one SSD. My issue is that SSD seemingly "spins down" and becomes unavailable. I cannot bring it back. If I disable the spin down for the disk, everything...

Hello SNBForums, My GT-AX6000 just arrived. Thing is huge, I'm excited:) Two quick questions: Do I need to boot up the stock FW once before I install Merlin, and if the answer is "No", then would there be any benefit to boot it up before installing Merlin (like some kind of license or...

I haven't seen this anywhere in the most current firmware, but it would be really cool to be able to have the router run a read/write benchmark to the attached storage. I am getting horrible transfer speeds on an RT-AC3100 with the most current firmware. It's an SSD attached with a SATA-III to...

I recently migrated from a Netgear ReadyNAS 314 to 626, which left me with two spare NAS drive bays. As it happens, after upgrading a computer, I also now have two extra Samsung EVO 840 SSDs (750GB, 1TB) lying around. Now that I've bumped up parts of my LAN to 10G, the biggest bottleneck in the...

After booting/rebooting AC86U my Orico SSD USB-C Case (JMicron Generic) connected in USB 3.0 mode doesn't mount, only manual reconnection works well. USB 2.0 mode of USB 3.0 port or USB 2.0 port works well too. Original ASUS ROM works fine with this case in USB 3.0 mode. Help me please! Thank...

Hi I'm now responsible of managing my company's network. It's a 3D visualisation studio with 15 workstations and we are planning to go to 30 this year. We use OCTANE as a render engine and it needs to load all the resources of a project from the NAS to the workstation memory, that is usually...

I've just purchased the QM2-2S card for my TS-253Be and I'm just wondering if anyone here has installed it or the pricier QM2-2S10G1T (edit : not compatible) or QM2-2P10G1T with 10 GbE Network port. Have you found significant performance increases as advertised? I chose the cheaper option as I...

Targeting the small office/home office crowd, QNAP’s 3-bay TS-351 is powered by an Intel Celeron J1800 dual-core 2.41 GHz processor (burst up to 2.58 GHz) and available in 2 GB and 4 GB dual-channel DDR3L models (both upgradable to 8 GB). The TS-351 also comes with two M.2 PCIe slots supporting...

(I hope this is the right forum for this question. Feel free to scoot me off somewhere else if not!) I just got a brand new Samsung SSD T5 and plugged it into the USB 3 slot of my ASUS RT-AC88U. Seems OK as far as it got but it is reported as unmounted. What do I do next? I am reasonably handy...

Powered by QNAP’s QTS operating system and AnnapurnaLabs Alpine AL-324 quad-core 1.7 GHz Cortex-A57 processor, the 3-bay TS-332X tower NAS is available in two models configured with either 2GB or 4GB DDR4 RAM (expandable to 16 GB). Along with two GbE ports, the TS-332X comes with a 10 GbE SFP+...

The third in QNAP’s SMB-targeted 9-Bay NAS series (TS-932X is AnnapurnaLabs-based and TS-963X is AMD-based), the TS-951X sports a 7th-generation Kaby Lake 14nm Intel Celeron 3865U low-power dual-core 1.8 GHz processor and is available in either 2 GB DDR4 RAM or 8 GB DDR4 RAM flavors with both...

QNAP’s latest set of QM2 PCIe expansion cards include models that support up to four M.2 SSDs, providing different to ways to use additional flash memory, including SSD caching, data tiering, or just adding more capacity. Designed for use with QNAP’s own PCIe slot equipped NAS products, the...

Is it possible? More particularly, it is LVM2 PV. If yes, how?

Does this have sense? I have problems which I believe are connected with insufficient power supply in my USB3 port. However I didn't found decent way to check it (to check whether it's power-related or not).

Hi All, Apologies if this breaches your "network equipment only" rule, please feel free to remove if that is the case. I have two Sandisk Lightning Ascend 12G-SAS 400GB SSD for sale at $1,000.00 per unit [o.n.o]. Capacity: 400GB Sequential R/W MB/s: Up to 980/600 Interface: 12Gb/s SAS...

Just months after acquiring SanDisk, Western Digital announced it is adding solid state drives (SSDs) as another branch to its family of internal storage products. WD Blue PC SSDs and WD Green PC SSDs will join WD's color-coded hard drive families, including WD Red for NAS drives, WD Purple for...

I'm considering buying a QNAP TS251+ and trying to aggregate the 2 LAN ports to improve my transfer and connection speeds. I think I would be able to get to approximately 220MB/s read/write, which would exceed the capability of a HDD (roughly 70MB/s?). So I'm considering installing a pair of...

Online backup vendor, iDrive, just released the One, an 802.11ac-based wireless storage device for home use. A dual-channel wireless device, the iDrive One is available in either HDD or SSD configurations, and utilizes beamforming to help remotely store files and system backups at speeds up...