[ 3006.102.6 alpha Build(s) ] available build(s)

[lgkahn]

interesting. I'll have to try again and see if I have the issue

 

[MDM]

Anyway, turning it off fixed it.. but i then reinstalled lastest 102 official release ..

Hope you did a factory reset each time going from RMerlin to Official..?

 

[lgkahn]

never went back to official. just back to last merlin release

 

[win465]

installed alpha latest 3006.102.6 beta oct 16 to my be88u,

ran into two issues

1. Suddenly on reboot it appeared to be in walled mode.. ie all dns queries returned 10.0.0.1.

From reading i saw it thought wan was down.. i had to turn off wan down browser notice in advanced/system.
wan was never down.. and interface main page showed it up.

I have wan on the 10gb/2.5gb wan port and the lan on the other 10gb port.

2. If this was really the case shouldn't it have gone to a page showing some message. websites just failed to come up?

Anyway, turning it off fixed it.. but i then reinstalled lastest 102 official release ..

i am willing to reinstall alpha and send you some logging. if that helps diagnose the issue..

thanks again for your workl

There's a new alpha version you should try out.

 

[Bob575]

There are new alpha versions available for these devices:

GT-BE98_Pro_3006_102.6_alpha2

RT-BE58_GO_3006_102.6_alpha2

RT-BE88U_3006_102.6_alpha2

RT-BE92U_3006_102.6_alpha2

RT-BE96U_3006_102.6_alpha2
Have fun, and Good Luck

 

[lgkahn]

There's a new alpha version you should try out.

No such issue with this build turned back on the setting and it is not redirecting to 10.0.0.1 for dns.. could have been a fluke with the other build why it thought wan was down

Was also able to save a password with a repeat character.. thanks. But strangely it had a popup that change password failed before redirecting to login page. but the password WAS changed.

bt88u dhcp , openvpn etc both 10g lan and 2.5g wan all working fine.

 

[Blacklistedcard]

Loaded build: 3006.102.6_alpha2-g683db26d11 onto my BE98Pro. Looks good. Nothing to report.

 

[win465]

Does anyone know if the new BE88U build includes the new binaries Merlin added this morning?

 

[visortgw]

Based upon the changelog, GPL 39099 should be included in all supported WiFi7 devices except for the RT-BE58 Go.

 

[KevTech]

There are new alpha versions available for these devices:

GT-BE98_Pro_3006_102.6_alpha2

RT-BE58_GO_3006_102.6_alpha2

RT-BE88U_3006_102.6_alpha2

RT-BE92U_3006_102.6_alpha2

RT-BE96U_3006_102.6_alpha2
Have fun, and Good Luck

Looks like you missed something.

 

[casao94]

Upgraded RT-BE96U to RT-BE96U_3006_102.6_alpha2-g683db26d11

I am seeing the following kernel messages in the System Log:

Nov 3 20:11:31 kernel: 0000: 13 04 01 ff 0d 58 00 f0 07 00 87 93 03 ff 03 59
Nov 3 20:11:31 kernel: 0010: 04 20
Nov 3 20:12:43 kernel: 0000: 13 04 01 ff 0d 58 00 f0 07 00 87 93 03 ff 03 59
Nov 3 20:12:43 kernel: 0010: 04 20
Nov 3 20:14:57 kernel: 0000: 13 04 01 ff 0d 58 00 f0 07 00 87 93 03 ff 03 59
Nov 3 20:14:57 kernel: 0010: 04 20
Nov 3 20:16:42 kernel: 0000: 13 04 01 ff 0d 58 00 f0 07 00 87 93 03 ff 03 59
Nov 3 20:16:42 kernel: 0010: 04 20
Nov 3 20:18:34 kernel: 0000: 13 04 01 ff 0d 58 00 f0 07 00 87 93 03 ff 03 59
Nov 3 20:18:34 kernel: 0010: 04 20

Could you please help identify what is causing these kernel messages in the System Log?
Thanks in advance.

 

[nzwayne]

All operational on the new Alpha2.

 

[win465]

Flashed the new firmware that released today on my BE88U and keep getting this watchdog in my logs every 30 seconds. I factory reset it after the firmware update and it's still happening. Also when I factory reset it, the BE88U couldn't detect my modem and had to do a manual setup. Any clue what this is?

22:43:19 rc_service: watchdog 3404:notify_rc start_amas_lanctrl
Nov 3 22:43:19 rc_service: watchdog 3404:notify_rc start_cfgsync
Nov 3 22:43:50 rc_service: watchdog 3404:notify_rc start_amas_lanctrl
Nov 3 22:43:50 rc_service: watchdog 3404:notify_rc start_cfgsync
Nov 3 22:44:21 rc_service: watchdog 3404:notify_rc start_amas_lanctrl
Nov 3 22:44:21 rc_service: watchdog 3404:notify_rc start_cfgsync
Nov 3 22:44:52 rc_service: watchdog 3404:notify_rc start_amas_lanctrl
Nov 3 22:44:52 rc_service: watchdog 3404:notify_rc start_cfgsync

 

[Bob575]

Looks like you missed something.

View attachment 68729

Ooops!

 

[Ripshod]

RT-BE88U with alpha2.
Network Map AND GNP showing no wireless devices connected. Specific to network map wireless devices are showing as "wired". Devices are connected in Wireless Log and I'm posting this from my connected phone.

 

[win465]

RT-BE88U with alpha2.
Network Map AND GNP showing no wireless devices connected. Specific to network map wireless devices are showing as "wired". Devices are connected in Wireless Log and I'm posting this from my connected phone.
View attachment 68733View attachment 68734

Can you check if your AIMesh is working? I think the errors I was getting in the log had to do with AImesh not working.

 

[Ripshod]

Can you check if your AIMesh is working? I think the errors I was getting in the log had to do with AImesh not working.

Unfortunately I've nothing available to test with as a node.

 

[win465]

I've nothing available to test with as a node.

Can you check if the aimesh tab in the router settings is loading up? I had a blank page when clicking the aimesh tab.

 

[Ripshod]

Can you check if the aimesh tab in the router settings is loading up? I had a blank page when clicking the aimesh tab.

Blank page, just as you're seeing. "System Settings" loads but "Topology" is blank.

 

[win465]

Blank page, just as you're seeing. "System Settings" loads but "Topology" is blank.

Yeah, this new build has some bugs. I reverted back to stock firmware for now.