[ 3006.102.6 alpha Build(s) ] available build(s)

[jksmurf]

Maybe similar issues with Client Device presentation.

RT-AX88U Pro, alpha1 (alpha2 not available yet for that model), RT-AX3000 Node with 388.10_2.

Main 3006.102.6_alpha1-gc3ecf6dda6 (16Oct25)
Node 3004.388.10_2

I am also seeing disaprities in network map vs previous FW (only 17 vs about 24 devices) AiMesh showing 17 too, Wireless log is however showing some of my ESP32 devices which I know are connected but are not showing up in the Network Map or AiMesh, and at least one of my Wired Device not showing at all (on Primary network). whereas wired devices on Guest networks are showing up OK. Just odd.

Can supply logs if needed.

[EDIT] Reverting to 3006.102.5 brought back the client numbers I expected and also the wired device on Primary and then updating to the older alpha1 3006.102.6_alpha1-g2480b89a4a (10Oct25) stayed the same.

 

[X3wKNkGk]

I tried to upgrade to alpha 2 for be86 (RT-BE86U_3006_102.6_alpha2-g683db26d11) but it wasn't done with the upgrade after it rebooted itself.
But it successfully upgraded to alpha 1 (RT-BE86U_3006_102.6_alpha1-g5507234591)
Not sure if there's something wrong here, I was trying to upgrading it from 3006.102.5 btw

I attempted to flash it via hnd-write command via ssh and it seems like it was just soft-bricked. I ended up using restoration utility to flash it back to 3006.102.5

 

[Katana1074]

I tried to upgrade to alpha 2 for be86 (RT-BE86U_3006_102.6_alpha2-g683db26d11) but it wasn't done with the upgrade after it rebooted itself.
But it successfully upgraded to alpha 1 (RT-BE86U_3006_102.6_alpha1-g5507234591)
Not sure if there's something wrong here, I was trying to upgrading it from 3006.102.5 btw

Confirmed, same happened to me....

 

[KevinGlynn]

Confirmed, same happened to me....

... and me

 

[visortgw]

RT-BE88U with alpha2.
Network Map AND GNP showing no wireless devices connected. Specific to network map wireless devices are showing as "wired". Devices are connected in Wireless Log and I'm posting this from my connected phone.
View attachment 68733View attachment 68734

FYI, no such issue with GT-BE98 Pro.

 

[Wisiwyg]

No issue with BE96U

 

[JakoPako]

RT-BE88U with alpha2.
Network Map AND GNP showing no wireless devices connected. Specific to network map wireless devices are showing as "wired". Devices are connected in Wireless Log and I'm posting this from my connected phone.

Same problem. I don't have any WiFi devices shown. For me, everything is also like cable. RT-BE88U - alpha2.
Edit: Back to alpha1 - OK

 

[cc666]

Installed the latest Beta 2 on GT-BE 98PRO. Full reset, manualy inputted all settings.
Log loaded with this:

kernel: External auth failed with status = (15)

Any ideas?

CC

 

[MDM]

Installed the latest Beta 2 on GT-BE 98PRO. Full reset, manualy inputted all settings.
Log loaded with this:

kernel: External auth failed with status = (15)

Any ideas?

CC

Google - 2 sec =
Wi-Fi authentication reject on Linux status_code=15 and Reason 15 is “4-Way Handshake timeout”.

Basically some device cannot connect...