Beta Asus RT-AX89X_9.0.0.4_388_31185 Beta

[DAVIZINHO]

I have the ax89x with 3 tuf-5300. And all perfect.
Before this i have 1 ax92 with dual 5ghz band (one wifi 6 and other wifi 5) and have a lot of problems in mesh.
I dont know what was the problem, but changing the ax92 for the tuf-5300 solves all my problems

 

[Tim Boening]

No issues with that. I'm on that firmware version with about a dozen 2.4 GHz clients. I haven't noticed anything.

Can you be a little more specific about the signature?

Signature 2.356

 

[Tim Boening]

There is new beta?

RT-AX89U_9.0.0.4_388_32100-gd2badf4_for_user.trx
https://www.asuswebstorage.com/navigate/a/#/s/75F0803793174F3F81BD6D3EF97D79024

 

[nicktork]

Is fan tuning broken for anyone else? According to the graph, my fan seems to be running at 2500RPM regardless of what settings I use.

 

[ben29]

Is fan tuning broken for anyone else? According to the graph, my fan seems to be running at 2500RPM regardless of what settings I use.

Same issue
I read about it
And there is issue with the fan
For me even on low is very noisy

 

[NSNE]

Is fan tuning broken for anyone else? According to the graph, my fan seems to be running at 2500RPM regardless of what settings I use.

I'm not seeing this issue on the latest beta firmware (32100). My fan is running around 1900rpm. Set to auto. Start is 45/75/90. Stop is 40/70/85.

 

[ivooliveira]

mesmo problema
eu li sobre isso
E há problema com o ventilador
Para mim, mesmo no baixo é muito barulhento

RT-AX89U_9.0.0.4_388_32100

 

[CBme]

Fan is ~1900 for me as well on RT-AX89U_9.0.0.4_388_32100. No issues.

 

[COSYOS]

Set the power save mode to "Auto". Even if the fan speed setting is set to "Auto", it will not be enabled.

 

[nicktork]

Set the power save mode to "Auto". Even if the fan speed setting is set to "Auto", it will not be enabled.

Thank you, that fixed the issue.

 

[arigon]

There is no newer beta than 32100 because the developers are busy with something else: https://www.bleepingcomputer.com/ne...ers-to-patch-critical-router-vulnerabilities/

But I have a problem that my WAN (10G SFP+) is restarted every 1-2 days...

 

[ben29]

There is no newer beta than 32100 because the developers are busy with something else: https://www.bleepingcomputer.com/ne...ers-to-patch-critical-router-vulnerabilities/

But I have a problem that my WAN (10G SFP+) is restarted every 1-2 days...

Sfp restart?

 

[arigon]

Sfp restart?

My log only shows this:

Jun 19 14:54:06 WAN Connection: WAN(0) link up.
Jun 19 14:54:06 rc_service: wanduck 1415:notify_rc restart_wan_if 0
Jun 19 14:54:14 wan: finish adding multi routes
Jun 19 14:54:17 WAN Connection: WAN was restored.

 

[ben29]

My log only shows this:

Jun 19 14:54:06 WAN Connection: WAN(0) link up.
Jun 19 14:54:06 rc_service: wanduck 1415:notify_rc restart_wan_if 0
Jun 19 14:54:14 wan: finish adding multi routes
Jun 19 14:54:17 WAN Connection: WAN was restored.

Check your router temperature

 

[ben29]

My log only shows this:

Jun 19 14:54:06 WAN Connection: WAN(0) link up.
Jun 19 14:54:06 rc_service: wanduck 1415:notify_rc restart_wan_if 0
Jun 19 14:54:14 wan: finish adding multi routes
Jun 19 14:54:17 WAN Connection: WAN was restored.

It happened to me before

I set the fan speed to Medium

And on lan settings i disable “ cpu nat acceleration”

 

[arigon]

It happened to me before

I set the fan speed to Medium

And on lan settings i disable “ cpu nat acceleration”

Temperature is good. NAT acceleration is enabled to bypass the CPU.

 

[ben29]

Temperature is good. NAT acceleration is enabled to bypass the CPU.

try to disable it

 

[arigon]

try to disable it

No, because all the traffic would then be processed by the CPU which means my internet speed would drop to ~200mbit instead of >1gbit.
Enabling NAT acceleration in this setting means disabling NAT acceleration by the CPU.

 

[ben29]

No, because all the traffic would then be processed by the CPU which means my internet speed would drop to ~200mbit instead of >1gbit.
Enabling NAT acceleration in this setting means disabling NAT acceleration by the CPU.

When I disabled this i get more internet speed

 

[arigon]

When I disabled this i get more internet speed

Are you also using the SFP+ port for 10gbit internet connection?