What's new
  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Release Asuswrt-Merlin 3004.388.10 is now available

I have an ax-88u with this latest fw running, after a week or 2 , i see instabiliy issues in wifi ... they are dropping are reconnecting , a few hours later, internet is gone completely, not able to access the router anymore, not on cable/wifi , even on cable and define a static ip address..

when i look in log after a restart the router, i see some erros like:


Code:
...
Nov 28 13:10:14 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Nov 28 13:10:14 kernel: br0: port 3(eth3) entered forwarding state
Nov 28 13:10:14 kernel: br0: port 3(eth3) entered forwarding state
Nov 28 13:10:14 kernel: br1: port 4(eth3.501) entered listening state
Nov 28 13:10:14 kernel: br1: port 4(eth3.501) entered listening state
Nov 28 13:10:17 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Nov 28 13:10:17 kernel: br0: port 3(eth3) entered disabled state
Nov 28 13:10:17 kernel: br1: port 4(eth3.501) entered disabled state
Nov 28 13:10:19 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
....
Nov 28 13:10:34 kernel: device br0 entered promiscuous mode
Nov 28 13:10:34 kernel: br1: port 4(eth3.501) entered learning state
...
Nov 28 13:10:49 kernel: ERR: rdpa_cpu_tx_port_enet_lan#213: rdpa_cpu_tx_port_enet_lan failed. rdd_rc=120 tx_rdd_error_count=14337
Nov 28 13:10:49 kernel: br1: topology change detected, sending tcn bpdu
Nov 28 13:10:49 kernel: br1: port 4(eth3.501) entered forwarding state

whats going on ? you can see its becoming instable, even the port is going down where my other ac86 node is connected with ..
what does this mean?

If i scroll up, the first time see the error, i also see some freed message?


Code:
Nov 28 12:55:04 wlceventd: wlceventd_proc_event(685): eth6: Auth D4:D2:D6:F5:FE:5A, status: Successful (0), rssi:0
Nov 28 12:55:04 wlceventd: wlceventd_proc_event(722): eth6: Assoc D4:D2:D6:F5:FE:5A, status: Successful (0), rssi:-82
Nov 28 12:55:04 hostapd: eth6: STA d4:d2:d6:f5:fe:5a IEEE 802.11: associated
Nov 28 12:55:04 kernel: CFG80211-ERROR) wl_cfg80211_change_station : WLC_SCB_AUTHORIZE sta_flags_mask not set
Nov 28 12:55:04 hostapd: eth6: STA d4:d2:d6:f5:fe:5a RADIUS: starting accounting session 7714E771AEAC6D9D
Nov 28 12:55:04 hostapd: eth6: STA d4:d2:d6:f5:fe:5a WPA: pairwise key handshake completed (RSN)
.....
Nov 28 12:55:08 kernel: FPM Pool 0: invalid token 0x04758000 freed
Nov 28 12:55:08 kernel: FPM Pool 0: ISR timer is enabled. There could be multiple occurrences of the reported issue
Nov 28 12:55:08 kernel: ERR: rdpa_cpu_tx_port_enet_lan#213: rdpa_cpu_tx_port_enet_lan failed. rdd_rc=120 tx_rdd_error_count=1
 
Last edited:

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Back
Top