Beta Asuswrt-Merlin 388.1 Beta is available for select models

[Martineau]

And they say that WireGuard is simpler than OpenVPN...

And you call me snarky?

You know full well that the standard script wg-quick wg0 up command simply requires a TEXT file (say 'wg0.conf') as input to fully configure a WireGuard interface (ASUS routers included), and the convoluted esoteric NordLynx guide is necessary to extract/circumvent their obfuscated/proprietary front-end to explicitly contradict your previous post.....

since you cannot directly view/manually import say their 'wg0.conf' file into your Wireguard GUI without it.

 

[RMerlin]

since you cannot directly view/manually import say their 'wg0.conf' file into your Wireguard GUI without it.

If they don't make it easily downloadable from their webui, there must be a reason. I suspect it's tied to how WireGuard relies on private keys to handle all authentication instead of a username/password. Maybe they don't have a centralized method of generating/storing these private keys.

 

[Samuel_1975]

Well, just want to ask, am curious about the next beta version to come?

Thanks for merlin asuswrt that there is DNS Director here and yes run it on default on family dns from cloudflare to my sister's router

Have a nice evening to you / yours is evening at my place, it's past 9pm in the evening

 

[RMerlin]

Well, just want to ask, am curious about the next beta version to come?

No timetable at this time. Beta 2 was released only four days ago.

 

[jerry6]

thanks I'll be trying this by friday on my AXE1100 first thing is to read instructions been years since I loaded Merlin on a new router

 

[RMerlin]

thanks I'll be trying this by friday on my AXE1100 first thing is to read instructions been years since I loaded Merlin on a new router

If it's a new router, it might be best to run the stock firmware for a while to ensure the router isn't defective. Running a beta third party firmware on a brand new retouer is definitely not the best idea IMHO.

 

[Nemesis8]

I followed this guide: https://forum.openwrt.org/t/instruction-config-nordvpn-wireguard-nordlynx-on-openwrt/89976

I can do now, one more question, you have enable runner and flow cache?

 

[Damit1]

3 days and running, no issues to report. Well, even an IOT that did not connect my network in long time has just connected. Odd indeed.
Thanks and cheers!

 

[Mazz]

If it's a new router, it might be best to run the stock firmware for a while to ensure the router isn't defective. Running a beta third party firmware on a brand new retouer is definitely not the best idea IMHO.

Myself just Purchased a GT-AX6000 on Friday and will be running stock for quite awhile. I will wait for the stock 388 firmware to be released, see how that goes and then maybe install Merlin at some point in time.

 

[Radiantes]

AX86U 388.1_beta2

Under USB Application pop up menu there is an entry for Advanced_TencentDownloadAcceleration that results in a 404 Not Found.
Not that it causes any real problem, but is it supposed to be there?

 

[KeithW]

Router RT-AX86U firmware 388.1 beta 2
It seems that on 388.1 Beta 2 the ability to change transmit power is gone. Mine just stays at 100% all the time.
I tried to change it and hit apply the router actually reboots but nothing changes.
I telenet into the router and use wl txpwr_target_max and get back (chanspec:0x1004) 25.00 25.00 25.00

The transmit power level doesn't change.
I can't lower it at all just stays at max.
Is this a known broken feature?

Thanks

 

[dave14305]

AX86U 388.1_beta2

Under USB Application pop up menu there is an entry for Advanced_TencentDownloadAcceleration that results in a 404 Not Found.
Not that it causes any real problem, but is it supposed to be there?

That flyout menu is not a feature of the Merlin firmware. That comes from an addon (scMerlin).

 

[RMerlin]

AX86U 388.1_beta2

Under USB Application pop up menu there is an entry for Advanced_TencentDownloadAcceleration that results in a 404 Not Found.
Not that it causes any real problem, but is it supposed to be there?

You are running an incompatible 3rd party addon that modifies the menu.

Is this a known broken feature?

Wireless output power cannot be changed by the end-user, it's hardcoded due to regulatory requirements.

 

[KeithW]

You are running an incompatible 3rd party addon that modifies the menu.


Wireless output power cannot be changed by the end-user, it's hardcoded due to regulatory requirements.

Oh thanks. I use to drop the transmit power to bring down the temps; would perform a bit better. But I was running older firmware. I haven't seen any issues with 388.1 Beta 2 pretty solid.

 

[capncybo]

Wireless output power cannot be changed by the end-user, it's hardcoded due to regulatory requirements.

What? This is confusing. Are you saying the older firmware versions were in violation of RF requirements? I was aware we couldn't increase the power over a certain MAXIMUM. But this just sounds wrong to prevent decreasing TX power output. How are we supposed to prevent over-saturating (buildings/households) locations when placing Access-Points or Mesh Nodes if we cant lower TX-Power?

 

[RMerlin]

Are you saying the older firmware versions were in violation of RF requirements?

No, I'm saying that values manually entered through the userspace tool may not have been doing what people thought it would. Output power levels are dynamically controlled by the driver, based on number of streams, channel, link rate, etc...

General output levels can be reduced through the webui on the Professional page.

 

[capncybo]

No, I'm saying that values manually entered through the userspace tool may not have been doing what people thought it would. Output power levels are dynamically controlled by the driver, based on number of streams, channel, link rate, etc...

General output levels can be reduced through the webui on the Professional page.

Thanks for clearing that up... I thought I had recently viewed a post/image of someone mentioning their TX slider (on the professional page) was no longer working. But I'll take a closer look, myself.

 

[SomeWhereOverTheRainBow]

The GT-AX6000 is really impressive, compared to my previous AX86U/AX11000 wireguard (NordVPN) speeds improved from a sustained 400-430mbps to 700-750mbps.

I guess the new CPU is making the difference ?

View attachment 45510

Here is mine with the same model router, and same vpn provider, using the same guide :

The top parts of the graph were speed tests done before enabling wireguard. The bottom part is after enabling wireguard.

 

[RMerlin]

Thanks for clearing that up... I thought I had recently viewed a post/image of someone mentioning their TX slider (on the professional page) was no longer working. But I'll take a closer look, myself.

That, I wouldn't know, as I never touched it, and the underlying code is closed source.

 

[Groslol]

Hey! Thanks for your work @RMerlin . But since I upgraded from 386.7_2 to 388.1 beta 2 I have big WiFi issues. After the upgrade I manually restarted the router as usual but didn't do a factory reset of it. Here's the log found in System Logs, seems to be a Broadcom problem:

Nov 16 09:33:08 kernel: potentially unexpected fatal signal 11.
Nov 16 09:33:08 kernel: CPU: 1 PID: 14501 Comm: dcd Tainted: P O 4.1.52 #2
Nov 16 09:33:08 kernel: Hardware name: Broadcom-v8A (DT)
Nov 16 09:33:08 kernel: task: ffffffc032154a80 ti: ffffffc02846c000 task.ti: ffffffc02846c000
Nov 16 09:33:08 kernel: PC is at 0xf6d3e39c
Nov 16 09:33:08 kernel: LR is at 0x1dce0
Nov 16 09:33:08 kernel: pc : [<00000000f6d3e39c>] lr : [<000000000001dce0>] pstate: 600b0010
Nov 16 09:33:08 kernel: sp : 00000000ffe46d58
Nov 16 09:33:08 kernel: x12: 00000000000a2050
Nov 16 09:33:08 kernel: x11: 00000000f5fff024 x10: 00000000000a23c4
Nov 16 09:33:08 kernel: x9 : 00000000f5fff6d4 x8 : 00000000000a287c
Nov 16 09:33:08 kernel: x7 : 00000000f5fff70c x6 : 00000000000a2876
Nov 16 09:33:09 kernel: x5 : 0000000000000000 x4 : 00000000f5fff6b8
Nov 16 09:33:09 kernel: x3 : 0000000000000000 x2 : 00000000ffe46d34
Nov 16 09:33:09 kernel: x1 : 000000000007d72e x0 : 0000000000000000

Although, WireGuard is working perfectly fine And much faster than OpenVPN

I have a AX86U