QNAP TVS-672XT and Router GT-BE98 router Virtualization Station Windows 10 download files from Internet Slow

[coerrace]

I have a QNAP TVS-672XT. I purchased the new GT-BE98 router. I have the 10 G Port 6 of the BE 98 Pro connected to the 10 G Port 1 of the Qnap.



I have a problem Virtualization Station in Windows 10 VM inside the Qnap. I made this test:



*fast.com 460 Mbps inside the Windows 10 VM of the Qnap.



*In this other one 40 Mbps:



https://www.highspeedinternet.com/tools/speed-test



*Copy a file from that VM Windows 10 to the directores of the QNAP 700 Mb/s



*Copy a file from the directories of the qnap to the directories of VM Windows 10 to 280 Mb/s. Off course being inside the same windows 10 VM session.



*Download from web with downloaded form that Windows 10 VM session to the Qnap directories with Jdownloader pointing to that directories as destination 7 MB/s



*Any file downloaded from any page stuck to 7 MB/s no matter if is the same directory of the VM. All downloads from any webpage are stuck in 5-7 MB/s



*Copy from that Windows 10 VM to the Intel NUC via network 289 MB/s



I have installed the VIRTIO drivers in Windows.



What I did? Is upgrade to the latest Virtio drivers from here:



https://fedorapeople.org/groups/vir...ownloads/archive-virtio/virtio-win-0.1.271-1/



Also in virtualization station I configured the VM testing the Intel and Virtio Models and they do the same. The problem to download of internet is not the Traffic or bad connection as in the same networks I have NUC's iPads, iPhones and a lot of other devices and they download and upload amazing fast minim 280 MB/s and much more.



In general the problem is to download files from Web inside the VM as can be seen what could be the problem or how to Fix the download from Internet stuck at 5-7 MB/s.

 

[coerrace]

I need to add this new test:

Another Note. I installed inside the qnap the download station to try to download directly from the qnap and isolate out of the VM to make the test. Download Station say is 28 MB the download Speed. I have 1 G with Spectrum Internet, then is possible then is the QNAP dashboard configuration instead the VM? As can be seen copy internally between the lan is just download from Internet files. What can be done here?

 

[degrub]

You may get a better response over in the QNAP forums.

 

[Philip Bondi]

I have a QNAP TVS-672XT. I purchased the new GT-BE98 router. I have the 10 G Port 6 of the BE 98 Pro connected to the 10 G Port 1 of the Qnap.



I have a problem Virtualization Station in Windows 10 VM inside the Qnap. I made this test:



*fast.com 460 Mbps inside the Windows 10 VM of the Qnap.



*In this other one 40 Mbps:



https://www.highspeedinternet.com/tools/speed-test



*Copy a file from that VM Windows 10 to the directores of the QNAP 700 Mb/s



*Copy a file from the directories of the qnap to the directories of VM Windows 10 to 280 Mb/s. Off course being inside the same windows 10 VM session.



*Download from web with downloaded form that Windows 10 VM session to the Qnap directories with Jdownloader pointing to that directories as destination 7 MB/s



*Any file downloaded from any page stuck to 7 MB/s no matter if is the same directory of the VM. All downloads from any webpage are stuck in 5-7 MB/s



*Copy from that Windows 10 VM to the Intel NUC via network 289 MB/s



I have installed the VIRTIO drivers in Windows.



What I did? Is upgrade to the latest Virtio drivers from here:



https://fedorapeople.org/groups/vir...ownloads/archive-virtio/virtio-win-0.1.271-1/



Also in virtualization station I configured the VM testing the Intel and Virtio Models and they do the same. The problem to download of internet is not the Traffic or bad connection as in the same networks I have NUC's iPads, iPhones and a lot of other devices and they download and upload amazing fast minim 280 MB/s and much more.



In general the problem is to download files from Web inside the VM as can be seen what could be the problem or how to Fix the download from Internet stuck at 5-7 MB/s.

I also found this to be slow on my QNAP. But I did not trace it as much as you have. I blamed the entire virtualization system and qcow2 files. But I do not have evidence.

Consequently, I've tried to move my network intensive activities from a virsh vm to NFS mounts directly onto QNAP. Therefore, any data that I want to move into or out of my VM can actually be orchestrated from QNAP os. Please see my post for some ideas.

 

[Philip Bondi]

Try to keep large files on the QNAP. Orchestrate file transfer from QNAP.

How to Install NFS Server and Client on Debian 12

NFS or Network File System is a network protocol that allows you to mount a remote file system over the network. In this guide, I will show you how to...

www.howtoforge.com

How to enable and setup host access for NFS connection

Applicable Products: All NAS series Procedure Follow the procedures below to enable and setup host access for NFS conn ...

www.qnap.com

 

[coerrace]

Yes I see. Yes is very rare the VM inside. One thing I changed that helped the QNAP OS but not the VM is in the MAIN QNAP select the the default interfase to the Virtual Port of 1 G and helped the OS as it was with the Wifi 6 card and had control over the 1G Lan controlling the speed and all. But that change despite the QNAP OS is stunning fast now, inside the VM the same no changes even having the latest VIRTIO drivers. What I'm doing now is to use the ARIA download to increase speed of downloads a little inside the VM as internal networks are fine very good no problems at all, just the problem is downloading files from Internet. Even QNAP support they don't know more about the issue. But anyway, for now with ARIA works soso but better than Google Chrome.

 

[coerrace]

I will check what you say anyway. Thank you for the response.