Menu
What's new
By:
Filters Better Search

aimesh

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. Jayce Ooi

    [Review] Asus RT-AX56U

    Author's Note: The original review can be found at my blog - Asus RT-AX56U Review @ JayceOoi.com. Meet the most budget Wi-Fi 6 router from Asus. RT-AX56U is powered by 1.5GHz quad-core processor. Supports both MU-MIMO and OFDMA technology. Loaded with AiProtection Pro network security powered...
  2. elrengo

    Is impossible to connect to SMB Share on AiMesh Node

    Hi! I've in my home two Asus Wireless Router: RT-AC3100 as primary router and RT-AC66U_B1 as AiMesh node. They are connected via cable. LAN port on AC3100 to WAN port on AC66U_B1. I've a laying under the floor that connects them. It's better connection than Wireless and works great. AC-3100 is...
  3. B

    Very poor 2.4Ghz performance in AIMESH setup

    I have an AIMESH setup with 4 RT-AX92U (one of these are Aimesh Router) and 2 RT-AC68U. I receive constantly poor performance on the 2.4Ghz net, while 5Ghz performs well. I have contacted ASUS support, they just wanted me to deliver the units for service, did want to troubleshoot or find the...
  4. C

    ASUS AIMESH & Powerline Adapter Together

    Hey all I’m hoping I’m posting in the correct sub-forum and following the rules. I’m very new to the technology world and have a few questions. I have recently built a house on my parents land that sits 100-150ft from the original house that has my router in the basement. There are no data...
  5. J

    RT-AC68U Aimesh Node 2.4 Ghz not working?

    RT-AC86U w/ 384.16, RT-AC68U Aimesh node w/ same, Diversion, UiDivstats, Skynet, AiProtection, Scribe, UiScribe, Conmon, SpdMerlin, ScMerlin, Nsrum, NtpMerlin, OpenVPN selective clients I don't think my 68U node is working on the 2.4 ghz frequency. How can I be sure since I can't access it...
  6. cktechie

    Asus RT-68U AiMesh with Asus_Merlin

    HI! I have Asus RT-68U AiMesh (both Router and Node are 68U) with Asus_Merlin 384.15 I use my laptop connected over Ethernet to the Node and Observing the Node Internet / Network connection on the Node keeps dropping - that is - the Internet connection to any device connected on the Asus AIMesh...
  7. xulian

    RT-AC86U dropping 2.4Ghz devices

    Hi, I have been testing latest firmwares and found that after a time 2.4ghz devices are being dropped, keeping 5ghz devices connected. This happens with latest 384.16 final, but comes from previous releases too. My configuration has a main RT-AX88U and 2 Aimesh nodes, one of them this AC86U...
  8. WoodenClogs

    Systemlog RC-68U "Need to restart wireless due current chanspec is un-available" ?!

    Hi all, I have no luck in trying to find the following error from my Asus RT-68U's (set up in Aimesh with two other RT-68U's on the upper floors) systemlog: "Need to restart wireless due current chanspec is un-available". It keeps disconnecting clients. This problem popped up a few weeks ago...
    • WoodenClogs
    • Thread
    • aimesh channel disconnect restart restart_wireless rt--ac86u
    • Replies: 12
    • Forum: ASUS Wireless
  9. M

    Good AiMesh node companion for RT-AC88U

    Any recommendations for a cost efficient solution to extend the range of an RT-AC88U taking the following into account: I have an Ethernet connection from the AC88U LAN-port to the 2nd access point (WAN) so I don't need to use WiFi bandwidth for the "extension" I would like to manage the...
  10. F

    AiMesh with a two-hop cable backbone topology

    Good day, esteemed members, I found a good deal for a dual RT-AX92U bundle and I'm hoping to find a bit of advice here about setting up an AiMesh network with a cable backbone, that is over two hops. The reason is that I don't have a direct connection between the ground floor and second floor -...
  11. J

    3 Asus Router Configuration for AiMesh

    I have the following setup now and want to add a 3rd router. ISP Cable comes into basement on far end of house that connects to an AC86U... I then have a AC68U on the other side of the basement. I have them connected by using a LAN port on the main AC86U to the WAN Port port on the AC68U. I...
  12. D

    Asus RT-AX88U AX6000 and RT-AX92U

    Hi, My AC88U died and I am considering buying the RT-AX88U and putting merlin firmware on it. But I was also thinking I would buy a pair of the RT-AX92Us and use them for AImesh. I know merlin does not support the RT-AX92Us. So, my question is that if I put merlin on the AX88U will that...
  13. J

    SITE SURVEY?

    RT-AC86U with Merlin 314.15, RT-AC68U aimesh node with same f/w, diversion, uidivstats, skynet, scribe, uiscribe, OpenVPN for select clients, conmon, spdMerlin, scmerlin, nsrum Hi, folks, Could someone tell me possibly what is going on in and around my little home network here from the chart...
  14. Laxarus

    2nd 5Ghz and AiMesh

    Hello, I have Aimesh setup with 3 lyra units and 1 main AC-5300 using wired backhaul. After updating Merlin 384.15, I've noticed the second 5ghz wi-fi band cannot be clicked on the main router page. Clicking 5Ghz-2 under system status gives below notice: "5 GHz-2 is now used as dedicated WiFi...
  15. chance

    How to verify switch mode of AiMesh node?

    Does asuswrt have a running config file equivalent? I would like to be able to check the diff between the aimesh router config and the aimesh node config to see exactly what is getting pushed down. Specifically I want to know if the aimesh node is operating in store and forward or cut through...
    • chance
    • Thread
    • aimesh aimesh local network aimesh merlin aimesh nodes nat acceleration
    • Replies: 7
    • Forum: Asuswrt-Merlin
  16. B

    AiMesh network from different routers

    Hi. I have an AiMesh network (RT-AC88U - main, 2 node: RT-AC88U and RT-AC86U). Node are connected to the main router in LAN ports. Can I connect Lyra MAP-AC1300 (2 pcs) also directly to the LAN port of the main router?
  17. R

    Aimesh info

    I use a 86U as a Aimesh router, with 2 66u_B1s as nodes, one with wired backhaul, one wireless. This is not a bug report as it is not recommended to use merlin on nodes, but just for information. The last 3 versions of merlin the wireless node would lose AImesh connection after about 8 hrs, you...
  18. A

    Unable to reach local clients after roaming

    Hi I have a AiMesh setup: Ac86: router 3.0.0.4.384_81351-gcb63868 Ac68u: node 3.0.0.4.385_20252-ga052d4c I am running with wireless backhaul. I have disabled smart connect as this gave a lot of disconnects. Everything works fine and stable except that if a client (e.g. iPhone) roams from...
  19. CaptnDanLKW

    AIMesh, SmartConnect and Roaming Assist best practices?

    I've been running AIMesh with SmartConnect enabled for a couple months and I'm not happy with client placement at times. Some of my distant 5Ghz clients, like a FireStick4k is staying connected to the main Router that's 100ft away, with a signal of approx -74db on 2.4Ghz when there is a AIMesh...
  20. C

    Need an AiMesh (2nd router) recommendation.

    Hi all. Ok, 6 mos. or so I replaced my older ASUS dual band router with my current RT AC-5300 because I accumulated more devices in need of WiFi. My house, a medium sized 4 bedroom is all lathe & plaster and 2 rooms are far apart seperated by multiple walls. When I purchased the AC-5300 I did...
Top