bandwidth

Hi, simple question: does the rt-ax58u have a function to register and show graph of internet speed? I don't speak about internet traffic, i'm speaking of internet bandwidth. Yes i know it can check the speed, but i don't see anywehere something creating a graph. What i want is a graph to check...

Hi all, A little background: I've been working with Ethernet for ~30 years, but I'm a newbie with MoCA, so please forgive me if my questions (below) are naïve. I'm on Xfinity cable, which enters (and splits) in the basement in a closet at one end of the house. The closet is shrouded by a...

I have a Asus ROG GT-AXE11000 router running Merlin 388.2_2_rog firmware. I noticed a behavior with the Wireguard VPN client setup on the router with the stock firmware and had not found a good solution and thought of giving the Merlin firmware a try. The problem still persists. The situation...

Hi all, Running RT-AC86U with Merliln 386.2_6. It is connected to a FiOS ONT over a gigabit ethernet port for a 500/500 connection. When I run spdMerlin or the included Ookla speedtest from the router (in Adpt QoS -> Internet Speed), I consistently end up with a max 350 mbps download and only a...

For simplicity's sake, neglecting the range concerns for now. There is a AC750 source router with one 5Ghz spatial streams, meaning 433Mbits top speed. Now, normal people would buy an AC750 repeater and they are sure to have their speed halved. There just isn't enough bandwidth. 1. If I buy any...

I have problems with Merlin version 384.15 When I choose QoS Bandwith Limiter and choose 5Mb/s down and 5Mb/s up I get 500kb/s and when I change to 8Mb/s than I get 800kb/s 5 or 8Mb doesnt get limited to Mb but Kb

Running: 384.16_beta1 on a RT-AC3100 When I use the VPNClient to connect to my VPN server (openVPN) the QoS - WAN/LAN Bandwidth Monitor page shows all the traffic on the upload side only. Not only the upload gauge but the client entries below the gauges only show the upload bar moving. I...

v1.1.1 Updated - 28th June 2022 ChannelHog - Monitor and force maximum 5GHz bandwidth About; Tired of badly configured neighbours and DFS cutting your wireless bandwidth in half? Then this is the script for you! ChannelHog will monitor your current 5GHz channel bandwidth on a daily basis...

I run an Asus RT-AC88U router at an apartment building with many users. But I am located offsite, so I use the router's remote HTTP interface. When I'm on-site at the apartment building, I can prioritize my own traffic over the residents if I need to get something done. However, when I'm located...

Hey all, So I just got AT&T fiber internet installed today, 300 mbps up and down. I set the gateway up for IP passthrough, so I could use my TP-Link Archer C5 (with OpenWRT) instead of the unit AT&T provided. My wireless throughput over the LAN averages between 45-50 MB/s (360-400 mbps)...

Hello to everyone. I have a really weird thing going on here and I'd like to ask for some help. The problem is as follows: I have a home ADSL Internet Connection of up to 24 Mbps for Download and up to 1 Mbps for Upload. I know that these are really lame internet speeds but in my country...

Hello, I play games and have been trying to minimize my network's latency to improve this experience. Also, I am hosing a LAN party soon where my network will have to support eight computers, so I have a bit of pressure on my to provide a good "low latency" experience, and my time is running...

Is there a way to limit the bandwidth for the guest network? I have been searching and all I've found is the Qos which works fine..but I am looking into limiting the bandwidth on everyone connected to the guest wifi to a lower speed than the rest of the network. I know I can limit each device...

I have a problem with RT-AC1200G+ because it is limiting internet connection bandwidth. I have optic internet connection with 80 Mbps. I was testing wired and wifi connection. With RT-AC1200G+ my download is 18 Mbps and with out is 79 mbps. before this router i had mikrotik without any...

Hi eveyone, Now I play alot of DOTA 2 and when I'm playing my ping is the be all and end all. It must be good. So I have the Asus RT-AC5300 as I thought it would help me with this issue. But I'm still struggling to get QOS to effectively work well. Now I have a 44Mbps download connection. When...

Hi all I'm having a problem where all wifi bands (2&5) are reverting to 20MHz and performance is basically non existant. Rebooting the router puts them back at 80MHz for 5 and 40MHz for 2 and performance is temporarily restored. I seem to be able to trigger this bug by making small changes to...

I have an ASUS RT-AC5300 and I only have 60 Mbps down and 5 Mbps up. Let's say I want to use a feature that's not compatible with hardware acceleration, such as "IPTraffic (per IP monitoring)". Would disabling harware acceleration affect normal performance on my connection (or connections below...

I am confused by wirelssmode and bandwitdth settings. I try to goole it ,but few article about them. I hope to get your help here ! Followings are my questions: 1. Why a/n/ac mixmode can set 3 optional bandwith: 20MHz, 20/40MHz, 80MHz? The 80MHz is only appled to ac mode? Aren't they...

If you’ve got a recent model TP-Link repeater (not routers!) on your network, you may want to look more closely into its NTP related traffic. Especially if you’re paying by the megabyte or are on a tight monthly data cap! I found that the firmware on TP-Link repeaters sends and receives 715 MB...

Running asuswrt-merlin on an Asus RT-N66U I'd like to be able to gather the historical bandwidth traffic data, by IP, from my router onto my computer so I can analyze and display the data better than the asuswrt-merlin web interface is capable of. A few questions: 1. I can get overall network...