dhcp

"/Advanced_DHCP_Content.asp", Menu "Manually Assigned IP around the DHCP list (Max Limit : 64)" What command can be used to display a list of assigned DHCP in the terminal? From the Home Assistant smart home, I control the availability of devices. In my network there are two ASUS RT-AX68U (fw...

I just noticed this in my syslog for the first time ever. I only set up 1 DHCP range, but the log is showing 3. I did add a new WiFi DHCP node today. The 3rd range below is my "real" one. Is this normal or did I mess something up?

Can you have 2 (or more) entries on the LAN-DHCP Server-IPv6 DNS Server box? If so, how to enter them? With ; or , or just a space between?

I have been using a RT-AX86U successfully in dual WAN mode with Charter Spectrum and TMobile home internet for over a year. Last Saturday, 11/26/22, I pulled out the TMobile router to test at my brother's. Last Sunday, 11/27/22, I turned off dual WAN mode, the RT-AX86U rebooted, and the Charter...

Upstream router address is updated every 3 days by ISP. After that, native mode WAN is successfully configured by SLAAC, but the Asus router didn't send a new DHCP-PD request. Upstream router's RA server M and O options are set. Need a 'service restart_"wan_if 0"' to fix it.

I have a DSL-AC68U which I want to configure (initially at least) without its DHCP server running but there seems to be no way to set the default gateway and the DNS server to use. I've set them in the DHCP Server settings but since the DHCP server isn't running I don't think the settings are...

Hello. I have an Asus router and an AP connected to it. (AP gets IP from router's DHCP. Both are on the same subnet '192.168.1.0/24'.) I'd like to serve clients connected to the AP from AP's DHCP server instead of the router's. How can I do it? I can config DHCP range '192.168.1.100 -...

So I have a slightly odd set-up. I rent and it's not possible to trail an ethernet cable from my main router, ASUS RT series, so I have my Netgear extender (in Extender mode) set up to pick up my Wifi from the router then I have that hardwired to my PC. This works really well for me as it is a...

Hey all, I'm bringing another question here, because I haven't been able to find any detailed info. What does the Use DHCP routes setting do under LAN / IPTV? By default it's set to Microsoft, but I don't think I'm using the setting, so, should I set it to disabled? Also, does it control the...

Hey guys, I recently did a hard reset of my AX-86U to give myself a fresh start on the latest firmware. I did all my normal changes and everything is setup and working. However, I noticed the default for the WAN DHCP is Aggressive mode. Doing some searches of older threads (some as new as...

Hey guys, Just a quick question about adding DHCP reservations to ASusWRT. Does it require clicking the apply button to save reservations? I've had routers on both sides of the fence where the DHCP reservation was saved when created, and that's it. Then on the other side, some required you to...

Hello! Weird issue (for me, anyways): regardless of what I plug into it, LAN 2 on a new GT-AX6000 forwards DHCP to my ISP, and the device gets an IP address outside of my network. Just that one port! Everything else works great, and I'd rather try to fix it before I return the router altogether...

Sometimes I check how many leases DHCP has issued using this command. cat /var/lib/misc/dnsmasq.leases | wc -l That doesn't really tell me if those clients are connected or not. So, to check how many connected clients I have, I try this: arp -a | awk '$4!="<incomplete>"' | wc -l The thing is...

I started out with a several questions. In writing this post, I answered a couple of them myself. The remaining question is; Am I creating an IP conflict by having the same IP in both configurations: dnsmasq.conf.add and DHCP servers tab? I have about a dozen manually assigned IPs using the...

Hi, first time poster here. First, thank you to the creators of Merlin and YazFi - they work great for my needs. I have an RT-AX86U running Merlin 386.5_2 with YazFi 4.4.2, and I have 3 guest network SSIDs set up with YazFi, using 5 subnets (YazFi.conf attached). First there's spider_guest - for...

Hi, In order to upgrade my security I would like to enable Mac filtering to prevent unknown device from connecting to my network what ever they know my SSID and PSK. I dont like to change my PSK periodic. This would take a lot of time with 30plus devices. Is there a way to enable Mac...

RT-AX68U, fw Merlin 386.4. WiFi connection problem. I don't understand the reasons. I see a successful connection: Mar 1 15:05:21 dnsmasq-dhcp[1489]: DHCPACK(br0) 192.168.50.22 a0:20:a6:2f:77:57 pzem3 Then many attempts to get the device name: Mar 1 15:06:21 dnsmasq-dhcp[1489]...

Hello, New to Asus routers (ex mikrotik hap ac2 but i wanted better wifi). Obviously non-merlin firmware on this RT-AX92U; Issue I have is I cannot reach computers inside my network via hostname when using WiFi; AX92U is in router mode (PPPoE); LAN1 - desktop1 LAN2 - miniPC WiFi: - aptop1 If...

Just updated to 16SF and noticed my internet port dhcp release/renew is set for every 30 mins. How do I change this? Can access/update through telnet, but not sure which NVRAM dhcp lease setting to change.

I have a ASUS RT-AX88U router that I need to factory reset (for various reasons). On the LAN -> DHCP Server... I have around 20 manually assigned IP addresses and with assigned icons I will lose all these entries as soon as I do a factory reset and will then have to type these in manually...