switch

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. L

    Very Slow SMB over over RT-AX58U

    Hello, I'm experiencing a problem with SMB over my RT-AX58U, both wireless and wired. Most of my network is hardwired through a layer 2 switch, which in turn is connected to the AX58U to act as my router and gateway. My network includes a very fast NAS (SSDs, RAID5) that transfers data at...
  2. H

    Asus Network design

    I am designing a network for several buildings over a reasonable area (not sure how many sq feet), but i estimate, ideally, it will require: A mesh capable primary router - I have 2 x AC88U and 1 x AX89X I think 4 x node routers - I have amassed 6 x AC68U a largish switch - I have a netgear 24...
  3. sfx2000

    News MaxLinear MxL86282 for 8x 2.5GbE and 2x 10GbE Low Power Managed Switches Coming

    Saw this over on servethehome.com https://www.servethehome.com/maxlinear-mxl86282-for-8x-2-5gbe-and-2x-10gbe-low-power-managed-switches-coming/ So hopefully we start seeing prices come down a bit...
  4. MarshallZA

    Question on GT-AX6000 2.5GbE Ports

    Hi SNB Peoples, I had a GT-AXE11000 until i dropped it this weekend. Like really badly. Like Paul Walker in a Porsche GT bad. I have ordered a GT-AX6000 to replace her, unlike the AXE11000 the AX6000 has Dual 2.5GbE ports. What I want to know is the following: I am going to plug my 1 Gig...
  5. grey-array

    Looking for a Unified Network Solution

    Hey Everyone, I am currently in an interesting position where I rent an apartment on an estate, My Landlord has a 500mbit connection, but due to the bog standard Modem/Router and the Auto Negotiation everyone can only use a maximum of 100Mbit even when noone else is using the connection. The...
  6. Moan

    A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch

    Hi guys. I got a new Asus ROG Rapture GT-AX6000 router. My network is the following: GT-AX6000: WAN: 1Gb/s download / 100Mb/s upload eth2: Old NAS (1Gb/s) eth5: Unmanaged QNAP QSW-1105-5T switch (2.5Gb/s) QNAP QSW-1105-5T: eth1: GT-AX6000 (2.5Gb/s) eth2: New...
  7. S

    D-Link DGS-1016C Switch

    Greetings everyone! It's been a long while since I've been around. I guess that means all has been well in terms of my networking setup/needs. 😁 I needed more ethernet connectivity in my media system stand so picked up a 16 port subject title gigabit switch, replacing a USB-powered D-Link 8...
  8. Y

    Unmanaged gigabit ethernet switch with modes

    Hi networking experts (of which I am not), TLDR: Which switch mode should I use in a mixed home network? I bought an unmanaged 16-port gigabit switch online that has no documentation. It has a three position switch labelled in Chinese which seems to mean (standard, clone, isolation). It seems...
  9. K

    Planning wired home network

    Hi - I'm looking to begin creating a wired network in my house in the UK - Wireless and boosters and powerline adaptors are current setup but irritating drop-outs and now need to have internet connection in an external garage Our router is in a downstairs family area in the centre of a 2 storey...
  10. K

    Wifi 6 Router recommendation

    Hello! I would like to ask for help in choosing a router. ■ In what environment (number/material of walls, distances, levels, neighbors) would it be used? I want to cover an area of roughly 60 square meters with it. The maximum number of walls between my devices and the router are 2 concrete...
  11. D

    8 Port Switch Stopped Working

    I have a Linksys CM3024 cable modem with XFinity internet. That goes into an Eero wireless router. Then out of the router into an 8 port switch to run all the wired components (my PCs, network printer, PlayStation 3 & 4, etc.) This has worked for over a decade with a basic unmanaged D Link...
  12. D

    Client Isolation on Switch and Router

    Configuration: LAN clients are connected to a single switch. Each client switch port is setup with a Private VLAN where they are allowed to communicate with the Internet, but not each other. The switch's uplink port is connected to the router (RT-AC88U) that acts as the DHCP and DNS server and...
  13. childersa

    Managed Switches and Mesh Backha

    Is there any insight as to why the Ethernet backhaul for many mesh wifi systems cannot pass through a managed switch? I have a ZenWifi XT8, and it, along with many others, have Ethernet backhaul as an option but they must go through an unmanaged switch. I’ve read some posts referring to it...
  14. KCL

    PoE NGFW?

    Does such an animal exist? Building a small office with all PoE phones and security cameras. I was hoping to do everything from the NGFW but most that I've found have a limited number of actual PoE ports. If I do get something rated as a PoE switch, am I wrong to assume that all the ports...
  15. macster2075

    PoE Switch question

    I'm planning on installing 2-4 POE security cameras. They most likely be 5MP cameras or 4K cameras, not sure yet. I know that a Gigabit Poe switch is always better, but my question is... is it required? Due to my specific situation, I won't be able to install more than 4 poe cameras. So having...
  16. flyingwolf

    Solved Can I use AIMesh with a managed switch handling the DHCP and other main network management?

    Currently, I have a number of AC68U's running my network. All run the latest version of Merlin. Router 1 handles the incoming fiber line and does the heavy lifting for the firewall, DHCP, and AiMesh master node. The other 3 act as nodes and do their thing. I would like to replace Router 1...
  17. O

    Help to setup a small LAN network

    Hello folks, Please how to connect all these devices to this switch? All the devices RJ45 cables are going to the Rack Patch Panel. No internet connection will be involved. Thanks in advance
  18. P

    Access layer switch + Wi-Fi router or integrated service router (Cisco RV series) for a student

    Hello, I'm a self-funded student reading for MSc in Cybersecurity. My research and work involve heavy local network usage. I currently have a single Netgear R7000, which has 4x1Gbps ports. All of the ports are divided between a Dell workstation with two NICs and a Synology NAS. I see my homelab...
  19. B

    What's bad about this setup?

    The following setup is for home network. It's just a theoretical one, a case study I create myself for my (near) future network upgrade. For now, I will not go into detail of my goals and reasons for the setup, but in general, I want it to be as secure as possible, and devices/clients must be...
  20. bulldog89801

    SOLD... For Sale - Netgear Nighthawk X10 Router and TP-Link Accessories - SOLD!!!

    SOLD - SOLD - SOLD I have several network items that I am putting up for sale. I has a stroke a few months back so now my son is managing my network for me. He installed a new Eero Wifi 6 Mesh system and was going to throw all of my stuff out... My loss is your gain! SOLD... FOR SALE: 1...
Top