switch

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. R

    Managed Multi-Gigabit Switch List

    There seems to be quite a few thread on this topic for people looking to upgrade beyond the long lasting gigabit standard. Increasing number of devices from motherboards to wireless APs to NAS are starting to include 2.5gbps NICs and I myself have upgraded my entire network. I thought I would...
  2. A

    Setup New Home Network

    Hi guys, I want to know if my setup already correct since I am using cctv technician. My ISP provided me with 150mbps speed up/down. Right now I have getting Modem and Router from the ISP itself which is Huawei HG8245H which have 4 ports Gigabit Ethernet and D-Link Gigabit Switch 16 Ports. The...
  3. L&LD

    QNAP QSW-1105-5T Switch

    https://www.anandtech.com/show/15916/at-last-a-25gbps-consumer-network-switch-qnap-releases-qsw11055t-5port-switch 5 Port unmanaged, no fan, 2.5GbE operation on all five of its RJ45 Ethernet ports for about $100 ($20/port). Time to upgrade everything again. :)
  4. Z

    Finally wired my house, now looking for equipment...

    Quite basic home network: 2 PC, 2 laptops, several smartphonesf, few tablets, few TVs etc House is wired with cat 6 - 13 lines meeting in a basement with ISPs ONT in a rack. ISP gives 900 mbps down and 280 up. Amateur wifi survey indicates that I'll need 3 APs to cover 3 storeys, brick and...
  5. J

    Access Points in a Mesh Network / Switch to Switch Questions

    Hi All Apologies if these are obvious answers and I hope someone can help! I currently use a Netgear RBK50 Mesh setup and have them positioned one either end of our home. We'd like to connect up our garage and the satellite closest to the garage doesn't quite cut it so we've run ethernet out...
  6. M

    Strange network issue, faulty switch or possible other issue?

    Not sure if this was posted in the correct section, please move it if it belongs somewhere else. TL;DR When my AppleTV is connected to the switch and it puts load on the network, other ethernet devices connected to the switch experience packet loss to/from my NAS that's connected directly to...
  7. skeal

    [RESOLVED] Need basic port based vlan help

    Hi I have three TL-SG108E smart switches. Named as: North, South, and Main. On North and South I have identical settings. 2 x 802.1q port based vlans. They are setup, one has a PVID of 2 the other 8. I setup two 802.1q vlans on the Main switch to separate the North and South switches, all...
  8. Julio Urquidi

    CES 2020: NETGEAR Expands PoE Switch Family

    NETGEAR announced six new mananaged and unmanaged PoE switches at CES 2020. The new POE+ switches include two managed and four unmanaged models: GS110TUP Ultra60 PoE++ 10-Port GbE Smart Managed Pro Switch with a 240W power budget GS710TUP Ultra60 PoE++ 10-Port GbE Smart Managed Pro Switch 8...
  9. zalves

    2 ISP routers 1 Switch

    Hi! I would like to connect two routers to my switch. They are both cheap routers that I can manage from my ISP, my switch is a Cisco SG350X-48P. One of the routers has the main internet line for all computers in the office, the other one has a secondary internet and where the voip telephones...
  10. W

    10G Router recommendation

    Upgrading my home network and needed some recommendations from gurus here. Two things are driving the change: 1. Internet speed finally switching to 1Gbps (hopefully a little more than that) 2. Need fast access from Macbook to NAS for 4k video editing Currently my WiFi AP is performing the...
  11. T

    Wanted some insight, to see if this setup would work!

    So, I currently have 2 routers. One is a Linksys and the other is an ASUS, I don't think models really make a difference in the scenario. Basically, I want to separate these routers entirely, but I want them to run off the same connection, with different IP's and devices connected would be...
  12. TanyaC

    Intel X550-T1 with Netgear MS510TX switch 10Gbe copper to Win 2012 R2

    I have a pair of Netgear MS510TX switches connected together with SFP+ transceivers. I have a Windows 10 PC running an ASUS XG-C100C adapter and Windows 2012 R2 PC running the same adapter. They are connected to the 10G copper port on the respective MS510TX's There are several issues with the...
  13. n944la

    WTB: Netgear Nighthawk X10 AD7200 (R9000) & Gbit managed switch

    If anyone has a NETGEAR Nighthawk X10 AD7200 (R9000) for sale, I am looking for one. PM or email for additional. Additionally I need a MANAGED multi-port gigabit switch. POE NOT needed. Fiber a plus. Eight (8) ports minimum. Quality brand only. Tnx Tim ARS N9NU
  14. TheLostSwede

    QNAP QSW-308 series of "10Gbps" switches

    QNAP has launched a pair of new "10Gbps" switches at Computex and I figured I'd share a quick snap here of the two new models. Both models have three SFP+ ports and the 1C model has one shared NBASE-T port. Both models also have a standard 8-port Gigabit switch. The only plus point is that both...
  15. sfx2000

    MikroTik CRS309-1G-8S+IN - 8 port 10G Layer 2 - $270

    Funny nobody mentioned this... https://mikrotik.com/product/crs309_1g_8s_in The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking...
  16. Magebarf

    10GbE (10GBASE-T) Switch - Edimax XGS-5008

    Ran across this switch yesterday, but as far as I can tell it should have been on the market since mid last year or so: https://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/global/smb_switches_web_smart/xgs-5008/ The reason I noticed it was because it is so compact, that it...
  17. M

    Connect PC and NAS with network.

    I have a PC, I want to buy NAS and connect both to network. I was just wandering, if it is possible to: Connect NAS and PC directly by Ethernet (10 Gbps) Connect NAS to switch with 2 Ethernet cables (each 1 Gbps) Connect PC to switch with 1 Ethernet cable (each 1 Gbps) And if yes, how to do...
  18. D

    Configuring Storm Control

    The TEG-082WS switch supports a feature called Storm Control. How do you determine an appropriate value for a port's Threshold that would support the purpose of Storm Control ?
  19. D

    Configuring IGMP Snooping

    Configuration Client > Switch (TEG-082WS) > Router (RT-AC88U) > Internet Should IGMP Snooping be configured on the switch or on the router ?
  20. D

    Switch recommendation to isolate LAN clients

    (7) Ethernet clients are connected to an Asus RT-AC88U which provides Internet access. I want to isolate the Ethernet clients from seeing / having any access to each other. To do this, the clients will be connected to a managed switch. The switch's uplink will be connected to the router. Each...
Top