What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

[ 386.4 alpha Build(s) ] Testing available build(s)

Status
Not open for further replies.
dave14305 said:
It's already merged in github, but no builds yet (or last time I checked).
Click to expand...
Compiles likely to take a good while ... the Maestro has very recently been supplied with GPL 386_45958 [much to the relief of "he who panics" ... ;)].
Makes sense that when he releases his latest firmware it is based on an actual widely released stock version :cool:.

Patience everyone ... will be well worth the wait :D.

EDIT: My bad ... 386_45958 not yet released as stock - so he's been placed ahead of the pack :cool::cool:!
 
Last edited:
RMerlin said:
Asus launched the GT-AXE11000 over 6 months ago, it's a separate router. Wifi 6E requires dedicated hardware, it's not something that can be software upgraded.
Click to expand...
it is just as "impossible" as in RT-AC86 bandwidth 160MHz? ;)

AX11000 & AXE11000 use 3хBCM43684
 
Last edited:
RMerlin said:
Exactly the same thing - these are higher frequencies that would require both filters and amplifiers designed to support these frequencies.
Click to expand...
Code: 
admin@RT-AX88U:/tmp/home/root# nvram show | grep -E 'territory_code|ccode|regrev|regulation|wl[0-9]_country|wl[0-9]_reg_mode|:max|wl[0-9]_chlist' | sort
size: 68437 bytes (62635 left)
1:ccode=#h
1:maxp2ga0=0x6E
1:maxp2ga1=0x6E
1:maxp2ga2=0x6E
1:maxp2ga3=0x6E
1:regrev=0
2:ccode=#h
2:maxp5gb0a0=110
2:maxp5gb0a1=110
2:maxp5gb0a2=110
2:maxp5gb0a3=110
*********************
2:maxp5gb4a0=110
2:maxp5gb4a1=110
2:maxp5gb4a2=110
2:maxp5gb4a3=110
2:regrev=0
wl0_chlist=1 2 3 4 5 6 7 8 9 10 11 12 13 14
wl0_country_code=#h
wl0_country_rev=0
wl0_reg_mode=d
wl1_chlist=36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165 169 173
wl1_country_code=#h
wl1_country_rev=0
wl1_reg_mode=off
admin@RT-AX88U:/tmp/home/root#

so it was in June 2020, one channel 177 (20MHz 5875-5895) is missing in firmware for the full range of 160MHz 5735-5895/149-177
 
Linuxer said:
Please excuse in advance me for asking this, but do you think "older" AC68U (i.e. not V4) will come in, sooner or later?

Thanks a lot for your work!
Click to expand...
It will come eventually, yes.
 
Just Bought A rt-ax82u router at a great deal on black friday week here in canada ... i know its not supported at this time but hope you add it RMerlin:) Merlinwrt would be amazing on this model
 
4DC5AE4E-10ED-4384-B285-D5751A868C77.png

github.com

Releases · gnuton/asuswrt-merlin.ng

Extends the support of Merlin firmware to more ASUS routers - gnuton/asuswrt-merlin.ng
github.com github.com
 
Last edited:
RMerlin said:
Asus launched the GT-AXE11000 over 6 months ago, it's a separate router. Wifi 6E requires dedicated hardware, it's not something that can be software upgraded.


Wifi is currently half-broken, but this is most likely a GPL issue because I had the same problem with the RT-AC68U_V4 wifi.

I can't test anything related to 6 GHz, I don't have any compatible client to connect to it (and Canada only approved the use of the 6 GHz band a few months ago).


Just be patient. I have the GPL for the RT-AC88U/AC3100/AC5300 but haven't had time to merge them yet. RT-AC68U_V4 support is mostly completed, so only the RT-AC68U GPL is still missing.
Click to expand...
Hello there i have a question i am using
Operation Mode:Wireless router Firmware Version:386.4_alpha2-g952c6bdecc

the system dont allowing me save WTFast GPN account details only i have this problem ?

thanks
 
abdullah salahaldin said:
Hello there i have a question i am using
Operation Mode:Wireless router Firmware Version:386.4_alpha2-g952c6bdecc

the system dont allowing me save WTFast GPN account details only i have this problem ?

thanks
Click to expand...
Sounds like the wizards behind the asuswrt curtain may have broken something with WTFast GPN. The general suggestion would be to test to see if this issue persist on non-alpha firmware. If is does, then the next step would be to test on stock firmware. If the issue exist on stock, then one would usually cruise over to the asuswrt help channels and report the issue to the appropriate wizards of asuswrt.
 
@RMerlin #u 149-177

Code: 
/* Locale 1DebugUn */
        CLM_DATA_FLAG_WIDTH_20 | CLM_DATA_FLAG_MEAS_COND | CLM_DATA_FLAG_MORE, /* Maxpower Group Flags, continuation */
        12, /*  Locale Maxpwr: 12 elt(s) */
     62, RANGE_5G_20M_36_48,   RATE_SET_5G_20M_1, /* 15.50dBm,   36-48, (MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     50, RANGE_5G_20M_36_48,   RATE_SET_5G_20M_26, /* 12.50dBm,   36-48, (OFDM6-54_CDD1, MCS0-7_CDD1, ************************, VHT10-11SS1_TXBF1, VHT10-11SS2) */
     90, RANGE_5G_20M_52_60,   RATE_SET_5G_20M_1, /* 22.50dBm,   52-60, (MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     82, RANGE_5G_20M_52_60,   RATE_SET_5G_20M_26, /* 20.50dBm,   52-60, (OFDM6-54_CDD1, MCS0-7_CDD1, *************************, VHT10-11SS1_TXBF1, VHT10-11SS2) */
     80, RANGE_5G_20M_64_100,  RATE_SET_5G_20M_1, /* 20.00dBm,  64-100, (MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     82, RANGE_5G_20M_64_100,  RATE_SET_5G_20M_26, /* 20.50dBm,  64-100, (OFDM6-54_CDD1, MCS0-7_CDD1, *************************, VHT10-11SS1_TXBF1, VHT10-11SS2) */
     90, RANGE_5G_20M_104_128, RATE_SET_5G_20M_1, /* 22.50dBm, 104-128, (MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     82, RANGE_5G_20M_104_128, RATE_SET_5G_20M_26, /* 20.50dBm, 104-128, (OFDM6-54_CDD1, MCS0-7_CDD1,*************************, VHT10-11SS1_TXBF1, VHT10-11SS2) */
     86, RANGE_5G_20M_132_144, RATE_SET_5G_20M_1, /* 21.50dBm, 132-144, (MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     82, RANGE_5G_20M_132_144, RATE_SET_5G_20M_26, /* 20.50dBm, 132-144, (OFDM6-54_CDD1, MCS0-7_CDD1, ************************, VHT10-11SS1_TXBF1, VHT10-11SS2) */
    118, RANGE_5G_20M_149_177, RATE_SET_5G_20M_1, /* 29.50dBm, 149-177, (MCS0-7, VHT8-9SS1, VHT10-11SS1) */
    106, RANGE_5G_20M_149_177, RATE_SET_5G_20M_26, /* 26.50dBm, 149-177, (OFDM6-54_CDD1, MCS0-7_CDD1, *************************, VHT10-11SS1_TXBF1, VHT10-11SS2) */

12, /*  Locale Maxpwr: 12 elt(s) */
     74, RANGE_5G_40M_38_46,   RATE_SET_5G_40M_4, /* 18.50dBm,   38-46, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     62, RANGE_5G_40M_38_46,   RATE_SET_5G_40M_16, /* 15.50dBm,   38-46, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8, VHT10-11SS1_STBC, VHT10-11SS1_TXBF1, VHT10-11SS2) */
     98, RANGE_5G_40M_54_54,   RATE_SET_5G_40M_4, /* 24.50dBm,      54, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     90, RANGE_5G_40M_54_54,   RATE_SET_5G_40M_16, /* 22.50dBm,      54, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1,  VHT10-11SS2) */
     66, RANGE_5G_40M_62_62,   RATE_SET_5G_40M_4, /* 16.50dBm,      62, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     62, RANGE_5G_40M_62_62,   RATE_SET_5G_40M_16, /* 15.50dBm,      62, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1, VHT10-11SS2) */
     74, RANGE_5G_40M_102_102, RATE_SET_5G_40M_4, /* 18.50dBm,     102, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     70, RANGE_5G_40M_102_102, RATE_SET_5G_40M_16, /* 17.50dBm,     102, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1, VHT10-11SS2) */
     98, RANGE_5G_40M_110_142, RATE_SET_5G_40M_4, /* 24.50dBm, 110-142, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     90, RANGE_5G_40M_110_142, RATE_SET_5G_40M_16, /* 22.50dBm, 110-142, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1, VHT10-11SS2) */
    118, RANGE_5G_40M_151_175, RATE_SET_5G_40M_4, /* 29.50dBm, 151-175, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
    106, RANGE_5G_40M_151_175, RATE_SET_5G_40M_16, /* 26.50dBm, 151-175, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1,  VHT10-11SS2) */   

10, /*  Locale Maxpwr: 10 elt(s) */
     74, RANGE_5G_80M_42_42,   RATE_SET_5G_80M_3, /* 18.50dBm,      42, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     62, RANGE_5G_80M_42_42,   RATE_SET_5G_80M_16, /* 15.50dBm,      42, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1, , VHT10-11SS2) */
     78, RANGE_5G_80M_58_58,   RATE_SET_5G_80M_3, /* 19.50dBm,      58, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     74, RANGE_5G_80M_58_58,   RATE_SET_5G_80M_16, /* 18.50dBm,      58, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1, , VHT10-11SS2) */
     82, RANGE_5G_80M_106_122, RATE_SET_5G_80M_3, /* 20.50dBm, 106-122, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     78, RANGE_5G_80M_106_122, RATE_SET_5G_80M_16, /* 19.50dBm, 106-122, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1,, VHT10-11SS2) */
     98, RANGE_5G_80M_138_138, RATE_SET_5G_80M_3, /* 24.50dBm,     138, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     90, RANGE_5G_80M_138_138, RATE_SET_5G_80M_16, /* 22.50dBm,     138, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1, , VHT10-11SS2) */
    118, RANGE_5G_80M_155_171, RATE_SET_5G_80M_3, /* 29.50dBm, 155-171, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
    106, RANGE_5G_80M_155_171, RATE_SET_5G_80M_16, /* 26.50dBm, 155-171, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1, , VHT10-11SS2) */      

4, /*  Locale Maxpwr: 4 elt(s) */
     74, RANGE_5G_160M_50_50,  RATE_SET_5G_160M_1, /* 18.50dBm,      50, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     62, RANGE_5G_160M_50_50,  RATE_SET_5G_160M_4, /* 15.50dBm,      50, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1,  VHT10-11SS2) */
     82, RANGE_5G_160M_114_163, RATE_SET_5G_160M_1, /* 20.50dBm, 114-163, (OFDM6-54, MCS0-7, VHT8-9SS1, VHT10-11SS1) */
     78, RANGE_5G_160M_114_163, RATE_SET_5G_160M_4, /* 19.50dBm, 114-163, (OFDM6-54_CDD1, MCS0-7_CDD1, VHT8-9SS1_CDD1,  VHT10-11SS2) */

160Mhz on 163 chanel present in firmware AX88 in debug mode #u
 
Last edited:
Router.JPG

router uptime.JPG

Alpha 2 from Nov 6 on AX88u is working well :) No issues to report
 
RT-AC86U
Alpha 3
Code: 
Nov 27 11:21:54 watchdog: start ddns.
Nov 27 11:21:54 rc_service: watchdog 1220:notify_rc start_ddns
Nov 27 11:21:54 custom_script: Running /jffs/scripts/service-event (args: start ddns)
Nov 27 11:21:54 start_ddns: eth0 has not yet obtained an ipv6 address
Nov 27 11:21:54 custom_script: Running /jffs/scripts/service-event-end (args: start ddns)

Log spammed with this. However, I do have native ipv6 address perfectly working.
 
Last edited:
Uh, oh, there is an alpha 3 for the AC86U?
Where is the changelog?
 
Last edited:
Status
Not open for further replies.

Similar threads

octopus
[ 3006.102.6 alpha Build(s) ] available build(s)
4 5 6
Replies
110
Views
14K
penguin22
P
octopus
  • Locked
[ 3006.102.5 alpha Build(s) ] available build(s)
4 5 6
Replies
111
Views
18K
octopus
octopus
octopus
  • Locked
[ 3006.102_4 alpha Build(s) ] available build(s)
14 15 16
Replies
313
Views
38K
octopus
octopus
octopus
  • Locked
[ 3006.102 alpha Build(s) ] Testing available build(s)
2 3
Replies
43
Views
10K
octopus
octopus
octopus
  • Locked
[ 386.14_1 Build(s) ] available build(s)
Replies
13
Views
2K
octopus
octopus
Similar threads
Thread starter Title Forum Replies Date
P WiFi drops Internet rt-ac86u on 386.14_2 Asuswrt-Merlin 8
J AC-86u vulnerability tracking post-EoL (asuswrt-merlin 386.14_2) Asuswrt-Merlin 8
B Please Help - OpenVPN Site-to-Site and Remote Access Setup – One Client, Two Servers (Asus RT-AC68U, Merlin 386.14_2) Asuswrt-Merlin 0
Natty 386.14_2 Hacked? 'Unrecoverable' Guest network issue Asuswrt-Merlin 49
C 386.14_2 - RT-AC86U - Web UI Inaccessible After Upgrading Asuswrt-Merlin 5
R WAN DNS setting ignored due to pppd - 386.13 on Asus AC68u Asuswrt-Merlin 14
UTAVATU [Asuswrt-Merlin 386.14_2] RT-AC86U Asuswrt-Merlin 3
BlackMage ASUSwrt 386.9 no WiFi Asuswrt-Merlin 5
A Asus 86U with 386.14_2 NO export certificate. Any workaround ? Asuswrt-Merlin 2
N AC 86U strange error 386.14.2 Asuswrt-Merlin 0

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Staff online

Members online

Total: 1,485 (members: 22, guests: 1,463)
Back
Top
✖