What's new

Asuswrt-Merlin 384.8 is now available

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

I'm trying to update the firmware, 384.8 to 384.8_2, but I can't load the file.

It's difficult for anyone to comment without more specific information.

When you try to update, does it give any particular error message ?

Did you unmount any USB stick or hard drive before trying to update ?

What model of router is it ?
If it is a converted TM-AC1900, it is not supported by the latest firmware builds. Asus have recently changed their code to prevent this, and this change has been carried over into the Merlin builds.
https://www.snbforums.com/threads/the-tm-ac1900-is-not-supported.48056/
 
Anyone know how I can update my firmware?
How much free RAM does it show at the System Status page? Do you use WiFi or Ethernet to update?
I usually have to turn of all JFFS scripts before updating a memory constrained router and always over Ethernet.
 
303mb free
I choose the update file, but when I click on Upload, it does not do anything.
I use Wifi, but try with ethernet too.
 
@RMerlin
Any chance of the patches enabling TEE in iptable getting incorporated in your builds?
I am currently frozen to a test build from John because of the missing module.
 
303mb free
I choose the update file, but when I click on Upload, it does not do anything.
I use Wifi, but try with ethernet too.
  • What router model?
  • What additional software, if any, is running on router (e.g., Diversion, Skynet, etc.)?
 
@RMerlin
Any chance of the patches enabling TEE in iptable getting incorporated in your builds?
I am currently frozen to a test build from John because of the missing module.

It's already done, except for the RT-AC86U which I forgot to.
 
Yes, and try with 3 differents computers.
Use wired connection. Use http and not https to enter webgui.
Try on other web browser. If possible, do a clear cache.
Take out USB if have, restart router and wait 5 min before flashing router.
 
Use wired connection. Use http and not https to enter webgui.
Try on other web browser. If possible, do a clear cache.
Take out USB if have, restart router and wait 5 min before flashing router.
My upgrades are:
  1. Login, reboot router (this clears any lingering issues and I've found this critical)
  2. Login, backup all settings just in case
  3. Observe warnings about any connected/mounted USB devices
  4. Flash router
  5. Final reboot.
I found the above works reliably for the past 2 years. The other thing to check is if you have any firewalls or AV/Anti-Malware possibly blocking the uploads. Later.
 
Anyone know how I can update my firmware?
1- Download the good fw for your router
2- Remove all usb devices hooked on the router ( to free up memory)
3- Reboot
4- Flash with 384.8_2 (wait until 100%)
5- Power cycle (off/on)
6- Reset to factory if something act weird after.
It should work
I am always using Firefox with no problem.
 
Last edited:
Hi,

Is there a GUI typo in the Guest Network panel? See attached screen cap. Both buttons say "Enable". I thought there was the option to either Disable, or Remove a guest network.

Thanks,
Anton
 

Attachments

  • Guest.jpg
    Guest.jpg
    68.3 KB · Views: 443
Hi,

Is there a GUI typo in the Guest Network panel? See attached screen cap. Both buttons say "Enable". I thought there was the option to either Disable, or Remove a guest network.

Thanks,
Anton
No, there are 3 separate Guest WiFi SSIDs possible per band. You're only using 1 of each.
 
  • OpenVPN clients will no longer have their download speed limited by the QoS upload limit when in Adaptive QoS mode.

I did installed Merlin FW 384.8_2 on my brand new RT-AC86u right away on the very first boot. I spent all night to configure all my network as it was and the OpenVPN client for CyberGhost with the Policy Rules I need but still all my devices are shown as Upload when Downloading. Missing something?
 

Attachments

  • Schermata 2018-12-19 alle 09.07.50.png
    Schermata 2018-12-19 alle 09.07.50.png
    261.8 KB · Views: 394

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top