YazFi Create bridge with Port 4 for VPN

  • ATTENTION! You'll notice a Prefix dropdown when you create a thread. If your post applies to one of the topics listed, please use that Prefix for your post. When browsing the thread list you can use the Prefix to filter the view.
  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.


New Around Here
I am using an Asus RT-AC68U running 386.3_2. I want to announce two SSID's. One with and the other without the VPN tunnel.

Let's say SSID1 is 'NoVPN' and it is bound to eth1 and eth2 (2.4 and 5 GHz), and SSID2 is 'VPN' and it is bound to wl0.1 and wl1.1.

I would like to separate Port 4 (1) from the regular br0 and create another bridge interface which will have the tunnel for the VPN as well as Port 4.

I would appreciate some pointers as to how modify the script.

1. The sample script only describes how to associate one wireless IF to the bridge and associated rules.
2. I understand that physical and logical ports on the RT-AC68U are reversed such that 4 is 1 and 1 is 4. Is that correct?
3. The idea is to have wired devices also plug into the VPN through the separated Port 4 and others plug into the regular (Non-vpn) through ports 1 - 3.

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!