I have a new RT-AC86U which is sat on a FTTP 250mbps / 30mpbs connection.
Upgraded firmware to latest 3.0.0.4.382.16466 - even flashed it again just in case this would fix it.
Locally everything is working OK and full speed access to the internet is not a problem.
I have configured the OpenVPN Server and can connect to it remotely OK from both a fast 4G phone and an external fast internet connected PC.
The problem is that from these devices the Routers Web Interface is painfully slow and when I configure the OpenVPN server to send all client traffic down the OpenVPN tunnel, to be sent on the routers fiber connection, that is also very slow - confirmed by speed testing at 0.5mbps / 6mbps. I understand that the up and down figures would be reversed as data is tunneling through the router i.e. max 30/250 at the client end.
I have tested using aes256/sha256/adaptive compression and aes128/sha1/disabled compression - both with no real difference in client connected speed, which is what I was expecting as CPU at both ends, PC and Router, were just idling. I tested with AI / QOS / Traffic Monitoring off and again no difference to when they are on.
Looking for advice / pointers to try and resolve this.
Thanks
Richard
Upgraded firmware to latest 3.0.0.4.382.16466 - even flashed it again just in case this would fix it.
Locally everything is working OK and full speed access to the internet is not a problem.
I have configured the OpenVPN Server and can connect to it remotely OK from both a fast 4G phone and an external fast internet connected PC.
The problem is that from these devices the Routers Web Interface is painfully slow and when I configure the OpenVPN server to send all client traffic down the OpenVPN tunnel, to be sent on the routers fiber connection, that is also very slow - confirmed by speed testing at 0.5mbps / 6mbps. I understand that the up and down figures would be reversed as data is tunneling through the router i.e. max 30/250 at the client end.
I have tested using aes256/sha256/adaptive compression and aes128/sha1/disabled compression - both with no real difference in client connected speed, which is what I was expecting as CPU at both ends, PC and Router, were just idling. I tested with AI / QOS / Traffic Monitoring off and again no difference to when they are on.
Looking for advice / pointers to try and resolve this.
Thanks
Richard