guest network

Hi all, I'm looking for a new router besides Asus where you can use multiple guest networks for a network isolation. I know this can be done on SOHO equipment with a combination of managed switch and VLAN aware access point but I'm looking for all in one\consumer router type of solution. So...

Is skynet active on guest networks (on the same subnet as main network)? (without the use of YazFi, etc) Thank you.

I have an Asus RT-AC3100 with 386.5.2. I'm using guest networks to isolate some devices and the DNSFilter feature to use OpenDNS to block some websites. DNSFilter works as expected on the main network, but does not work when I move a device over to the any of the 3 guest networks. Also, I can...

I have an ASUS RT-AX88U router that is running RT-AX88U_388.2_2 firmware. I have a Guest Network setup that I use to connect to every day when working from home. I had my router set so that every Monday night at 5am, my router would perform a scheduled reboot. However, when it does this, my...

Hi folks, I see here on SNBforums and on Reddit are dozens (or maybe close to hundred) posts about VLANs on Asus Merlin routers, though I haven't found a comprehensive guide/Howto. Anyone can recommend one for my case? My main is AX86S (router mode) and also a second node AC68U that is wired...

can I change the MTU for a guest network interface? If yes, how so? (And any reason not to?) Thank you!

Hi, I'm interested in buying some XD6 mesh nodes to extend coverage (I have an RT-AX89X). However, I'm getting conflicting information on whether it supports the "Guest Network on AiMesh node". I have this setting on my AX89X. If someone could please confirm to me that this setting exists on...

I currently have two RT-AX88U devices. The basement one has Asuswrt-Merlin, the other is stock (but I could easily put Merlin on it, too). The RT-AX88U ("Router 1") in the basement is directly connected to the WAN (and a number of rooms in the house by ethernet). The RT-AX88U ("Router 2") on the...

I'm hoping someone can help me understand why I can't seem to print. I've created a Guest network with the same SSID and Pwd on my Zen Wifi XT8 router on both the 2.4 and 5 GHz bands (using it to isolate IOT and work computers). The printer is connected to the correct wireless as is the client...

Hey guys I hope this is the right sub-forum to post this. I have a RT-AC86U with latest merlin and I just SSH'd into my router and ran the command to install YazFi. I'm quite new to routers and things like this and I was under the impression I could run guest networks through my normal ISP...

Hi I'm running the setup as in title: * single [email protected] * a few [email protected]_42862 as Ai-Mesh nodes * have configured Guest Network #2 @2.4GHz and these are my settings: The issue is that according to 1) https://www.asus.com/support/FAQ/1045327/ 2)...

Haven't found any answers to this out there, but is it possible to assign a custom DNS setting to a Guest network on the ZenWifi XT8 router? The only place I see where a custom DNS can be set is under the WAN setting, but this is global, meaning it affects all the networks. I don't see a...

Hello. I have a device connected to Guest network #1 (192.168.101.0/24 subnet) which I’d like to reach from my PC (192.168.1.134). Is this possible? Maybe with some forwarding rules or with something else? Thanks!

Lately my guest network password isn't recognized as correct. I tried on several computers, and both 2.4GHz and 5GHz. It used to work perfectly, but at some point after an update or reset, it stopped working. I use WPA2-personal AES and a 12 character password. The normal network works fine. I...

Hi All, I’m trying to setup my network to isolate IoT devices from internal LAN (wired and regular WiFi), my personal devices (iOS and MacOS) are accessing the IoT ones through a single LAN device hosting Homebridge. Now the possible scenarios for the IoT devices are the following IoT device...

Hello to everyone, long-time lurker, first time poster - please be gentle! I tried to find the answer for my question for days before posting, but to no avail, so here goes: I have a Synology NAS with a cloud-based D-Link camera for which I made a guest network with no Internet access...

Hi, first time poster here. First, thank you to the creators of Merlin and YazFi - they work great for my needs. I have an RT-AX86U running Merlin 386.5_2 with YazFi 4.4.2, and I have 3 guest network SSIDs set up with YazFi, using 5 subnets (YazFi.conf attached). First there's spider_guest - for...

Hi folks, I'm trying to work out how I can create schedules on the Guest Networks to toggle them on/off during certain days/times. My kids are driving me nuts with it and they can easily get around the parental controls with MAC address spoofing etc. Instead, they are going to have their own...

I have an AIMesh system with two routers: RT-AC86U is the main (running firmware 3.0.0.4.386_48260), and an RT-AC68U as an AIMesh node (running firmware 3.0.0.4.386_48262). My problem is that when I view the list of wireless devices connected to each AIMesh node (via...

Hi, I searched the forum but can't find a recent direct answer to this. Parental controls are a mess out there. Is there a way to put automatic parental controls on the guest network? Or use open DNS for the guest network and block Facebook, ticktok and YouTube while google dns is for the...