samba

Hi there, First things first, happy new year to everyone here in the forum and thanks to all of you who work very hard in order to make the Asus Merlin FW possible! You guys rock! I've been pulling my hair trying to fix a weird issue on my AC68U (384.14). The problem I'm having is that my...

I installed wsdd2 from Entware on my RT-AC68U with Asuswrt-Merlin 384.12. And I noticed that wsdd2 was also imported into Asuswrt-Merlin 384.12. I disabled everything about samba and wsdd2. Here's the output of command ps. (Attachment ps_state.txt) Here is the output of netstat -nlp...

In the default configuration of "SMBv1 + SMBv2" the router(as an browsable computer) does not show up at all in Windows Explorer this also the same when using SMBv2. When switched to SMBv1 it works fine, I have tested this both on desktop and laptop and get the same result. If I mount the...

I recently upgraded from an AC87U to an AC86U but I can no longer access to the router's external HHD and USB via Wifi Samba. LAN is fine, it just seems to be via Wifi. The Windows 10 laptop I previously was able to access the router's external storage can no longer see the router. I have SMB...

First of all, I'd love to thank the Merlin devs for all the work you've done to make the Merlin firmware a reality. I've used it for a number of years and it's fantastic. Is there any reason that Samba has not been updated to the most recent release version? Samba 3.6 was last updated in...

I'm trying to insert some veto rules into my smb.conf file via the following smb.postconf, located at /jffs/scripts/smb.postconf: #!/bin/sh CONFIG=$1 sed -i '' 's:veto files = :veto files = /._*/.DS_Store/.Trashes/.TemporaryItems:g' $CONFIG Unfortunately it doesn't appear to have any effect...

Hi! I have install 384.8_2 on my AC-RT66U_b1 to be able to cofigure SMB. SMB main conf is: Connected 3.5 USB3 HDD with separate power source. (MAIVO K3568g2+WDC WD40 EFRX-68N32N0). On PC i have 100-150 MB/s (800-1200 Mb/s)+- seq read, depends on part of the disk and 20% less seq write. Log...

Hey friends, I've got a USB network place setup through SMB. Everytime I copy a file into a folder, it changes all files and folders to "Read-Only." I can't change any file names or delete any files. I can immediately fix it by accessing the properties of the file or folder in Windows and...

Hi everyone, I just replaced my N66U (running Merlin FW) with the better AC86U (running Asuswrt-Merlin 384.7_2), but I cannot find out how to do USB to USB backup like I had configured with the N66U router. Basically, I have 2x 4TB drives (one named "Primary" and one "Secondary") both hooked...

Hi, I upgraded my router from a R7000 to a R7800. I used an external USB drive with the R7000 formatted with ext4. Everything worked. The drive is detected and mounted on the R7800 and I can browse and read the content, but I can only write to existing folders and new create new folders using...

I am about to get a 6TB drive. According to the compatibility chart, only up to 4TB EXT4 partitions are supported. So I assume I should format it with 4+2TB EXT4 partitions, and then share that out via Samba so Windows clients can use it like a network share.. Is there anything I should know...

I'm looking to setup some basic home file sharing. I have an 8tb drive on the way which I will half fill with existing music and photos/videos. I want to be able to access these photos/music/videos from a handful of windows and linux computers, android devices, and perhaps a roku if possible. My...

So I recently bought a GT-AC5300, and so far I love everything about it. BUT, the one thing that im a little annoyed about it the lack of compatibility for network storage. I was hoping to use it as a NAS, with a hard drive plugged in. I've got it set up with FTP and a software called...

Have a Samba share configured, but get empty folder/content on any client - tried both Windows and Android (using TC LAN plugin) clients.. Attached screenshot. What am I missing?

Hello, I have a Samba share in use over USB thru RT-N66U via an external HD and am looking at upgrading to a newer router. Does anyone have any guides on how to setup the samba share on the new router without losing any configurations on the external drive? Thanks

I have two AC5300 routers, one configured as Wireless Router and the other as Access Point. I updated both from 380.69_2 to 384.4 a couple of days ago and both seem to be working fine. I have not yet reset to factory defaults since both are working well and the few settings that have been...

The setup: RT-AC68 FW384.3 The router CPU is overclocked to 1000MHz to improve USB Storage performance with 2.4GHz wi-fi enabled. The problem: trying to transfer files from USB HDD attached to the router to a computer over 1GB link results in inconsistent speed and complete failure with very...

I use a USB drive connected to my ASUS AC3200 Router for my SBACKUP destination on ubuntu linux. It has been working successfully, but stopped connecting after upgrading to 384.3. The connect string in SBACKUP is: smb://user@rt-ac3200-0170/backup/backups-user The error in SBACKUP is: Unable to...

So I recently purchased a 2TB WD Elements HDD for the purpose network storage, I formatted this drive ext4. I noticed pretty fast that SMB default values give terrible wireless performance (LAN tests though are great at 100MB/s+ transfer rates). I decided to-do some tweaking and found some...

I currently have two USB hard drives attached to my RT-AC86U running Merlin 382.2_beta3. 1. 4TB USB hard disk, formatted ntfs, 1 partition, used for SMB & NFS Shares 2. 8GB USB flash drive, formated ext2, 2 partitions (2GB swap, 6GB data), used for entware, AB-Solution, etc. I would like to...