speed

Hello, Since a month or 2 my wireless internet is much slower than before. I have 3 accespoints (2x netgear WNDR4300 and 1x dlink DIR600) so wifi coverage is not the problem, I have tested the wired performance of every accespoint including the main router (ISP provided router) these speeds are...

Hi How do I set Banwidth Limiter to control all devices at once? I know I can set each device individually, but I can’t find a way to limit all at once. I am not referring to allocating the speed by gaming, browsing, etc... I would like to set the following.. Max download speed 22 Mbps Max...

Hi! I have install 384.8_2 on my AC-RT66U_b1 to be able to cofigure SMB. SMB main conf is: Connected 3.5 USB3 HDD with separate power source. (MAIVO K3568g2+WDC WD40 EFRX-68N32N0). On PC i have 100-150 MB/s (800-1200 Mb/s)+- seq read, depends on part of the disk and 20% less seq write. Log...

Hi guys, I'm trying to improve my router's signal coverage in my home. My house has 2 floors and the router is located in the upper floor, mounted high up. My router (D-Link DIR-882 AC2600) has 4 antennas. According to what I've researched online, the best antenna position is like an L shape...

Hello all, I recently upgraded my internet from 300/300 (down&up) mbps to 950/750 mbps. Prior to the upgrade I was getting roughly 340/270 mbps on wireless ac and 340/340 on a wired connection. After the upgrade, I am getting roughly 600/400 mbps while sitting right next to the router...

I have an issue with the Wi-Fi speed on my AC88U running real scenario tests. So for the purposes of the test I'm running 4 devices: ASUS AC88U (runs around 60 degrees C during testing (with cooling) - 2.4Ghz & 5Ghz, around 6 WiFi devices reported on Merlin) Macbook Pro 2016 (Wireless AC &...

Hi, is there any builtin speed testing tool in Merlin? I need strong evidences in my struggle with ISP. Or my only choice is Entware and iperf?

So I recently purchased a 2TB WD Elements HDD for the purpose network storage, I formatted this drive ext4. I noticed pretty fast that SMB default values give terrible wireless performance (LAN tests though are great at 100MB/s+ transfer rates). I decided to-do some tweaking and found some...

Hi, I recently got a Netgear CM1000 modem on my gigabit Xfinity connection. When I hook my laptop up to the modem directly I am getting close to a gigabit connection, at least above 900 Mbps consistently. But when I hook up (ethernet) through my R7000 with fully upgraded stock firmware I'm...

I have an AC66U B1 with the latest Merlin firmware. By enabling Tx Bursting, I get my speed increases from 250Mbps to 310Mbps. I am connected to the 5Ghz band on ac. I have seen that Tx Bursting affects only g and a. So what's happening here?

Hello All I have been experiencing severe wifi issues on the latest firmware revisions as of late. Ever since upgrading I have had the following issues. Intermittant bands showing wifi dropping on and off wifi showing no internet when connected devices simply not connecting to the wifi...

Hi Guys, The long and short of it, I had ADSL2+ and got upgraded to fibre. ADSL2+ (Private Internet Access VPN) Desktop Client Without VPN: 7Mbps With VPN: 1Mbps When the fibre upgrade happened, bought a shiny new R7000 Nighthawk, flashed it with Asuswrt-merlin 380.58 and setup a new VPN...

I recently purchased an Asus RT-AC3200. I've now set it up, downloaded and installed the latest version of firmware from Asus and I'm not getting the download speeds over WiFi that I was expecting to get. The WiFi signal is strong (dB signal strength/attenuation figures are 2.4 GHz -52 dBm and...

(I posted this, then realized how long it is - sorry, a lot of info, but I erred on the side of too much info versus not enough) First, my setup: I have an Actiontec C1000A modem/router. My ISP is CenturyLink Type: DSL (internet only - I don't have landline phone setup) Speed: max 10 up/1...

Hello Merlin forum! I'm using ASUS RT-AC66U (box says H/W version: b0) and Merlin WF 380.64_2 (last release atm). I'm having this issue for about 2 months. Every 1-4 days my internet speed goes from ~96 mbits/s to ~8 mbits/s, every website opens super slowly. The router log shows this...

My ISP doubled my download speed to 100 Mbit/s and upload to 10 Mbit/s recently and I thought it was time to replace my ancient 54G router from Linksys. I bought and installed the WRT3200AC with a new CAT6 ethernet cable without a problem. I now receive 98 - 102 Mbit/s throughout the day. My...

Hi! I just bought an R7800 (on sale for 199 at Best Buy!) & in the process of setting it up I have run into 2 issues. I cannot get WOL over WAN to work. I can see the request in my logs but the PC does not wake up. WOL over LAN works without issue. I also enabled respond to ping & verified my...

I'm considering buying a QNAP TS251+ and trying to aggregate the 2 LAN ports to improve my transfer and connection speeds. I think I would be able to get to approximately 220MB/s read/write, which would exceed the capability of a HDD (roughly 70MB/s?). So I'm considering installing a pair of...

I just purchased an Asus RT-N12 D1 to function as an AP while connected to my N56U which has been performing well. However I have not had good performance with this router, in particular on range over 2 walls. This router was meant to replace a strong performer, the Buffalo WZR-HP-G300NH which...

Hopefully I'll be able to figure out if my router is the cause of my current bottleneck or if there is something else that I should look into first. The issue that I'm running into is that if I max out my downstream (or at least max what the router can handle) at approximately 15MB/sec the...