vlan

Hi all, Been lurking for a while and finally created an account to ask this question, which has probably been asked and answered but I haven't really found anything specific to my situation while searching around. In a general sense, I'm wondering what is the best way to isolate all my IoT...

(7) Ethernet clients are connected to an Asus RT-AC88U which provides Internet access. I want to isolate the Ethernet clients from seeing / having any access to each other. To do this, the clients will be connected to a managed switch. The switch's uplink will be connected to the router. Each...

Hi There, I recently purchased a new Asus RT-AX88U modem as my ISP (Vodafone) one kept disconnecting, and I can't seem to get it to connect to the internet. I've followed up with Vodafone but their tech support basically says they only support the Vodafone provided router and can't help me...

I need to setup few vlan on my ac3100 I have done in the past perfectly on a netgear wndr4000 with dd-wrt , just I like the asus web gui interface which give more detail So I'm looking to configure 5 vlan (excluding the vlan2 which is used for the wan connection) 1: is my personnal network 3...

(This on RT-AC86U RT-AC68U) Could someone kindly explain what the IPTV settings do for someone from Cisco IOS background? Thank you. [Background: my ISP has installed a Nucleus Connect fiber modem with two ports enabled: one for internet access and one for IPTV (i.e. IPTV doesn't actually share...

My AC1900P is set in AP mode, connected to a port on a Mikrotik router configured to tag all egress traffic with a vlan ID. With my regular unmanaged Netgear switch, even though the switch itself is not vlan-aware, it has no issue passing through the tags to downstream clients, and vlan-aware...

Hey guys, I am in need of some help here. I am in a situation where I have a large number of rommates/guests connected to my WIFI. I am using an ASUS AC5300 as my access point. DHCP and everything is handled my a pfSense instance running on my unRaid server. Here is my problem. When I set the...

Hi all I'm new to the forum and would appreciate some help with configuring my RT AC66U (merlin v380.70) and Cisco 3560 POE24 (IOS v12.2.55-SE12) to work together in a multi vlan topology. I have been spending literally weeks researching and trying to do it myself unsuccessfully and recently had...

Hey all, I have none experience with firewallrules. I hope that someone can and will help me. In my router Asus RT-AC66U with the latest tomato shibby fw i have create 3 VLAN's VLAN 0/1 = my normal home network VLAN 2 = my guest network VLAN 3 = my IOT network. I like to have acces from...

I know vlan tagging is not really officially supported, but figured I'd ask here if anyone has had the same issue as me... I have a 2 NIC pfsense box, with the lan interface having 2 extra vlans, 4 (10.0.0.1/24) and 5. I have an Asus RT-ac3100 in AP mode with asuswrt-merlin running on it and am...

Hi! i need configure two vlan 100 (internet) 2 (voip) and pppoe session each vlan, similar movistar triple vlan settings for ISP TIM Brazil (FTTH).

Hi Guys, I'm a regular visitor on this forum and user of Merlin for a few years now, i usually poke around untill i get it right but i'm stuck with this for so long (2 months) i decided to ask for your much needed help. Router: AC88U My goal, is to have 4 VLAN's as such; 1 - private -...

Hi all, I'm in a bit of a pickle which I will do my best to describe here, but please bare with me. I am currently paying my internet provider 10 bucks a month for a modem & router combined, (One device). I want to purchase a similar product to send theirs back and have full control of my...

Hi, I'm trying to work out the best way to separate a home and B&B with VLANs so that they are not a threat to each other but can both access the (PPPoE or IPoE) broadband connection. Currently there is a standard home wireless router. The home uses wireless and ethernet, and the B&B is...

I’m using the latest ASUS firmware for the AC-66U (3.0.0.4.380.8228), which I don’t believe has VLAN capability. I would like to segment my IoT devices off from the main network for security since these devices usually are weak on security. What would be the downside of using a guest network...

Hi all, fairly new to networking, at least at the routing level. My network is actually in a theater, but still pretty small: three switches, two at FOH and one in the orchestra pit. There are two VLANs that I currently need frequent access to, VLANs 20 and 30, and I thought if I trunked those...

Hello, long time lurker here, finally decided to register on this amazing forum. I get a 100/20 fiber connection and IPTV from my ISP. IPTV uses VLAN 3999, while Internet is untagged. TV Box uses both VLANs. Internet for channel logos and EPG, VLAN 3999 for multicast. The options in the...

Hi, I just flashed my AC68U with asusmerlin. And the device is connected to ISP router via WAN port. And I have Windows AD to handle DNS and DHCP, thus I'm setup AC68U in AP mode. I don't use the LAN port on the device because I only use wireless feature as wired clients handled with switches...

Hello, I would like to use WAN port on a par with other 4 LAN ports in access point (AP) mode on my RT-AC87U with 380.68_4 Merlin firmware. Do I need to move WAN port (port 0 on BCM5301x switch) from vlan2 to vlan1 manually by robocfg utility in AP mode? Thank you.

Is it possible to pass VLAN tags using two MI424WR Rev I MoCA bridges? Is there some setting I'm missing? I even tried putting the upstream and downstream MoCA bridges on a VLAN port on a switch using a PVID and VID tag. That also didn't work, but it might be because the bridges were still...