Beta Asuswrt-Merlin 3006.102.5 Beta is now available

[jerry6]

105 beta2 working as expected can not find any problems , nobody in the house is screaming for my head /
Thanks again

 

[alba666]

Almost up 6 days with no issues on the BE92U.
Thanks for the update!

 

[RMerlin]

Patch received from Asus for CaptivePortal, working correctly now for me on a GT-BE98_Pro with an HP laptop connecting to it.

 

[robinjoo1]

anything i can do about these messages


30 20:34:48 kernel: ^[[0m
Jul 30 20:34:48 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 2500 mbps full duplex
Jul 30 20:36:21 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link DOWN.
Jul 30 20:36:21 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 1 port = 0 spd = 2.5G dup = 1
Jul 30 20:36:21 kernel: ^[[0m
Jul 30 20:36:25 kernel: MACSEC: macsec is not enabled
Jul 30 20:36:26 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 1 port = 0 spd = 2.5G dup = 1
Jul 30 20:36:26 kernel: ^[[0m
Jul 30 20:36:26 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 2500 mbps full duplex
Jul 30 20:36:32 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link DOWN.
Jul 30 20:36:32 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 1 port = 0 spd = 2.5G dup = 1
Jul 30 20:36:32 kernel: ^[[0m
Jul 30 20:36:36 kernel: MACSEC: macsec is not enabled
Jul 30 20:36:37 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 1 port = 0 spd = 2.5G dup = 1
Jul 30 20:36:37 kernel: ^[[0m
Jul 30 20:36:37 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 2500 mbps full duplex
Jul 30 20:37:01 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link DOWN.
Jul 30 20:37:01 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 1 port = 0 spd = 2.5G dup = 1
Jul 30 20:37:01 kernel: ^[[0m
Jul 30 20:37:05 kernel: MACSEC: macsec is not enabled
Jul 30 20:37:06 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 1 port = 0 spd = 2.5G dup = 1
Jul 30 20:37:06 kernel: ^[[0m
Jul 30 20:37:06 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 2500 mbps full duplex

 

[bennor]

anything i can do about these messages

If you are asking about the "kernel: MACSEC: macsec is not enabled" notifications, the following comment from RMerlin in another discussion last year may be relevant.

That`s not an error, that`s a notification. MACSEC is a business security feature that your home router does not support, the kernel is simply mentioning it as it reports a port connection.