Beta Asuswrt-Merlin 388.1 Beta is available for select models

[Ripshod]

Just a little fail. Have been running the built-in wifi scanner (Wireless>Wifi Radar) and when I tried to download the database I was sent to the login page.after logging in I tried to download the database again and the same thing happened. I don't even know if it's relevant but in the logs:

ov 22 18:40:43 kernel: Bad mode in Synchronous Abort handler detected, code 0x8a000000 -- PC Alignment
Nov 22 18:40:43 kernel: CPU: 1 PID: 19814 Comm: httpd Tainted: P           O    4.1.51 #2
Nov 22 18:40:43 kernel: Hardware name: Broadcom-v8A (DT)
Nov 22 18:40:43 kernel: task: ffffffc01ab0eac0 ti: ffffffc0042d4000 task.ti: ffffffc0042d4000
Nov 22 18:40:43 kernel: PC is at 0x63010102
Nov 22 18:40:43 kernel: LR is at 0x8c598
Nov 22 18:40:43 kernel: pc : [<0000000063010102>] lr : [<000000000008c598>] pstate: 00030010
Nov 22 18:40:43 kernel: sp : 00000000ffa2a488
Nov 22 18:40:43 kernel: x12: 00000000000c52ac
Nov 22 18:40:43 kernel: x11: 00000000ffa2a4a4 x10: 000000000092d400
Nov 22 18:40:43 kernel: x9 : 00000000ff9db9fc x8 : 0000000002080801
Nov 22 18:40:43 kernel: x7 : 0000000008010908 x6 : 0000000008010104
Nov 22 18:40:43 kernel: x5 : 0000000009115dce x4 : 00000000821f61ad
Nov 22 18:40:43 kernel: x3 : 0000000000000000 x2 : 000000000092d400
Nov 22 18:40:43 kernel: x1 : 00000000ff9db9fc x0 : 000000000004fef7
Nov 22 18:40:43 kernel: potentially unexpected fatal signal 4.
Nov 22 18:40:43 kernel: CPU: 1 PID: 19814 Comm: httpd Tainted: P           O    4.1.51 #2
Nov 22 18:40:43 kernel: Hardware name: Broadcom-v8A (DT)
Nov 22 18:40:43 kernel: task: ffffffc01ab0eac0 ti: ffffffc0042d4000 task.ti: ffffffc0042d4000
Nov 22 18:40:43 kernel: PC is at 0x63010102
Nov 22 18:40:43 kernel: LR is at 0x8c598
Nov 22 18:40:44 kernel: pc : [<0000000063010102>] lr : [<000000000008c598>] pstate: 00030010
Nov 22 18:40:44 kernel: sp : 00000000ffa2a488
Nov 22 18:40:44 kernel: x12: 00000000000c52ac
Nov 22 18:40:44 kernel: x11: 00000000ffa2a4a4 x10: 000000000092d400
Nov 22 18:40:44 kernel: x9 : 00000000ff9db9fc x8 : 0000000002080801
Nov 22 18:40:44 kernel: x7 : 0000000008010908 x6 : 0000000008010104
Nov 22 18:40:44 kernel: x5 : 0000000009115dce x4 : 00000000821f61ad
Nov 22 18:40:44 kernel: x3 : 0000000000000000 x2 : 000000000092d400
Nov 22 18:40:44 kernel: x1 : 00000000ff9db9fc x0 : 000000000004fef7

 

[NikL]

I just applied error on both settings and it's still there. It's only that one device. I have about 12 google speakers around the house and it seems like this one is the only one appearing in the logs with this message
View attachment 45685

I had the same issue with Beta2 on AX86U. It's related. Not able to switch from 2Ghz to 5Ghz. After some time fixed. Rolled back to 7.2 finally

 

[octopus]

Updated my routers and working just fine. Aimesh working as it should.

12 hour(s) 26 minute(s) 51 seconds

Thank you @RMerlin

 

[abir1909]

I added wgserver-start, wgserver-stop, wgclient-start and wgclient-stop (with the unit number passed as argument).

This is in addition to the already existing postconf/custom config files.

Custom config:
wgclient<UNIT>
wgserver<UNIT>
wgserver_peer (for generated client config file)

Postconf:
wgclient<UNIT>.postconf
wgserver<UNIT>.postconf
wgserver_peer.postconf (for generated client config file)

I assume this is to use with SSH? whats the exact command to start wireguard client 1 to start? i am trying to run the command on ios shortcuts. i tried "Service wgclient1-start" nothing happended.
thx

 

[octopus]

Have you tried, "service wgclient1_start"

 

[RMerlin]

Just a little fail. Have been running the built-in wifi scanner (Wireless>Wifi Radar) and when I tried to download the database I was sent to the login page.after logging in I tried to download the database again and the same thing happened. I don't even know if it's relevant but in the logs:

I've encountered that issue in the past, but most of the related code is closed source, so I could never get to the root cause of it.

I assume this is to use with SSH? whats the exact command to start wireguard client 1 to start? i am trying to run the command on ios shortcuts. i tried "Service wgclient1-start" nothing happended.

Try service start_wgc1 or service start_wgc 1 ( i haven't tried it).

 

[Trent Hubbert]

Installed Beta3 today and 8 hours later need to reboot router.

Nov 22 20:38:26 dnsmasq[2004]: failed to send packet: Resource temporarily unavailable
Nov 22 20:38:26 dnsmasq[2004]: failed to send packet: Resource temporarily unavailable
Nov 22 20:38:26 dnsmasq[2004]: failed to send packet: Resource temporarily unavailable
Nov 22 20:38:26 dnsmasq[2004]: failed to send packet: Resource temporarily unavailable
Nov 22 20:38:26 dnsmasq[2004]: failed to send packet: Resource temporarily unavailable
Nov 22 20:38:26 dnsmasq[2004]: failed to send packet: Resource temporarily unavailable

any idea what is causing this? No addins installed.

AX86S

 

[Plak]

Beta 3 installed on axe16000. Running latest asus stock firmware 3.0.0.4.388_21617-g1288c22 on AI mesh node axe16000. Reset back to factory settings. Took some time to get everything setup and back online. So far running great first day.

 

[evo17paul]

Successfully upgraded from beta1 to beta1 and then beta3 this morning (didn't want to jump betas just in case)

Thanks for the good work Rmerlin

 

[abir1909]

I've encountered that issue in the past, but most of the related code is closed source, so I could never get to the root cause of it.




Try service start_wgc1 or service start_wgc 1 ( i haven't tried it).

Unfortunately none of the 3 options above works.
just FYI for the open VPN I am using “service start_vpnclient1” and it works!

 

[octopus]

Unfortunately none of the 3 options above works.
just FYI for the open VPN I am using “service start_vpnclient1” and it works!

It should be.

service start_wgc(unit)
service stop_wgc(unit)
service restart_wgc(unit)

Usage: service <action_service>

 

[GMcD79]

Recently performed a clean install on my RT-AX86U. Everything has been running great, although I noticed one small inconsistency between the Ports Section on the main page and the SysInfo page. The main page tells me my HIVE Hub is only connected at 10mb, whereas the sysinfo page shows the correct speed of 100mb.

Not earth shattering, but thought I’d mention it.

Thanks

 

[Ser9ei]

In case wg client is enable, all dns requests are go through the wg vpn.
As I see, /tmp/etc/wg/dns1.sh script create automatic and there are iptables rules to redirect dns requests.
RMerlin, could you please add functionality in the web interface to disable redirect of dns request?

 

[skeal]

In case wg client is enable, all dns requests are go through the wg vpn.
As I see, /tmp/etc/wg/dns1.sh script create automatic and there are iptables rules to redirect dns requests.
RMerlin, could you please add functionality in the web interface to disable redirect of dns request?

You can do this by using DNS director.

 

[abir1909]

It should be.

Usage: service <action_service>

Did you actually test it?
I tried again with different ssh client and still showing off.

 

[RMerlin]

RMerlin, could you please add functionality in the web interface to disable redirect of dns request?

Clear the DNS field on the WGC client config page.

 

[visortgw]

Beta 3 installed on axe16000. Running latest asus stock firmware 3.0.0.4.388_21617-g1288c22 on AI mesh node axe16000. Reset back to factory settings. Took some time to get everything setup and back online. So far running great first day.

Have you tried pushing guest network 1 WITH INTRANET DISABLED to AiMesh node? If not, could you please?

 

[dbell]

Have you tried pushing guest network 1 WITH INTRANET DISABLED to AiMesh node? If not, could you please?

I am running with this config on my pair of AX86u's. I had been running with intranet enabled due to an issue (either routing or not being able to lease a dhcp address) so the devices could not connect to the internet but that seems to be resolved now. All of my IoT devices (e.g. Ring, Nest, LG washer/dryer type stuff) are connected to that guest network (some on router and some on node) and all are online.

 

[visortgw]

I am running with this config on my pair of AX86u's. I had been running with intranet enabled due to an issue (either routing or not being able to lease a dhcp address) so the devices could not connect to the internet but that seems to be resolved now. All of my IoT devices (e.g. Ring, Nest, LG washer/dryer type stuff) are connected to that guest network (some on router and some on node) and all are online.

I have working GT-AX6000 as well. The issue appears to be specifically with GT-AXE16000 as primary router for both Merlin and Asus builds -- VLAN tags are not being passed to AiMesh nodes. I am awaiting response from Adus tech support escalation.

 

[unsynaps]

Woo! Router supports ECC once more.