AutoBW: Automatically set QoS bandwidth using spdMerlin

[figorr]

Are you sure you are connecting to the same Ookla server between the speedtest on your PC and the router (just a thought).

Yes, I have chosen the same server for spdmerlin and in the speedtest web page. In both cases I am using the closest server to my location (CSUC Server in Barcelona, Spain).

 

[Kingp1n]

Sorry. Please pull down a fresh copy from development and try it again.

Thanks for the assistance...working with no issues now!!

 

[SomeWhereOverTheRainBow]

Can't wait for this to get combined in with SpdMerlin. This concept is definitely worthy of the inclusion into the @Jack Yaz collectables.

 

[Jack Yaz]

@squidbilly FYI: https://github.com/jackyaz/spdMerlin/pull/23

Please let me know if any of the changes will impact AutoBW, and we can co-ordinate releasing updates.

 

[SomeWhereOverTheRainBow]

@squidbilly FYI: https://github.com/jackyaz/spdMerlin/pull/23

Please let me know if any of the changes will impact AutoBW, and we can co-ordinate releasing updates.

Awesome job man!

 

[squidbilly]

@squidbilly FYI: https://github.com/jackyaz/spdMerlin/pull/23

Please let me know if any of the changes will impact AutoBW, and we can co-ordinate releasing updates.

Thanks Jack Yaz. That sounds great to me, and I will surely do what I can. It might be later today or tomorrow before I can really look at your changes. So, the spdMerlin results will no longer be written to csv files? Happy Easter.

 

[Jack Yaz]

Thanks Jack Yaz. That sounds great to me, and I will surely do what I can. It might be later today or tomorrow before I can really look at your changes. So, the spdMerlin results will no longer be written to csv files? Happy Easter.

They are still written to csvs. I can't see anything that will have an effect on AutoBW, but I wanted you to check and give the go-ahead in case I've missed something

 

[Donga120]

Whats the benefits of letting this set your upload/download speed at 85% or 90% of your max speed?

i.e I get about 310/50, but using this drops it to roughly 260/44 with a 90% scale but I'm not sure of the benefits?

 

[L&LD]

@Donga120, if you are consistently getting the paid for speeds, using slightly lower values will then further help with reduced bufferbloat and significantly less lag in time-sensitive network usage, such as VOIP or gaming.

 

[Donga120]

@Donga120, if you are consistently getting the paid for speeds, using slightly lower values will then further help with reduced bufferbloat and significantly less lag in time-sensitive network usage, such as VOIP or gaming.

Makes sense! Thanks.

 

[squidbilly]

They are still written to csvs. I can't see anything that will have an effect on AutoBW, but I wanted you to check and give the go-ahead in case I've missed something

Ok, upon closer inspection, I did not see anything either. So, I "think" you should be OK with AutoBW compatibility. (I know ... famous last words ... right?)

 

[Jack Yaz]

Ok, upon closer inspection, I did not see anything either. So, I "think" you should be OK with AutoBW compatibility. (I know ... famous last words ... right?)

v3.4.0 has now been released

 

[bluzfanmr1]

Having issues when running the script. Is this a bug or do I need to do something?

/jffs/scripts/AutoBW

 TEST MODE: No changes will be made.

               ---------------- SPDMERLIN -------------
                 Download (Kbps)       Upload (Kbps)
               -------------------  -------------------
Running  1 of  2 speedtest, please wait... (standard_in) 1: illegal character: ^M
(standard_in) 1: illegal character: ^M
(standard_in) 2: syntax error
(standard_in) 2: syntax error
Test  1 of  2           0.0                  0.0
Running  2 of  2 speedtest, please wait... (standard_in) 1: illegal character: ^M
(standard_in) 1: illegal character: ^M
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Test  2 of  2           0.0                  0.0
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Average                 0.0                  0.0
Scale Factors          0.85                 0.85
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Scaled Speeds           0.0                  0.0
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand

               ----------------- QOS ----------------
                 Download (Kbps)      Upload (Kbps)
               -------------------  -----------------
Previous              86016.0              5632.0
New (from above)          0.0                 0.0
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Scaling by              0.000               0.000

              ====================================== DOWNLOAD ======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

              ======================================= UPLOAD =======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

 TEST MODE: No changes were made.

 

[dave14305]

Having issues when running the script. Is this a bug or do I need to do something?

Something needs to have dos2unix run on it to convert the line endings.

 

[Jaime Alvarez]

Having issues when running the script. Is this a bug or do I need to do something?

/jffs/scripts/AutoBW

 TEST MODE: No changes will be made.

               ---------------- SPDMERLIN -------------
                 Download (Kbps)       Upload (Kbps)
               -------------------  -------------------
Running  1 of  2 speedtest, please wait... (standard_in) 1: illegal character: ^M
(standard_in) 1: illegal character: ^M
(standard_in) 2: syntax error
(standard_in) 2: syntax error
Test  1 of  2           0.0                  0.0
Running  2 of  2 speedtest, please wait... (standard_in) 1: illegal character: ^M
(standard_in) 1: illegal character: ^M
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Test  2 of  2           0.0                  0.0
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Average                 0.0                  0.0
Scale Factors          0.85                 0.85
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Scaled Speeds           0.0                  0.0
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand

               ----------------- QOS ----------------
                 Download (Kbps)      Upload (Kbps)
               -------------------  -----------------
Previous              86016.0              5632.0
New (from above)          0.0                 0.0
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Scaling by              0.000               0.000

              ====================================== DOWNLOAD ======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

              ======================================= UPLOAD =======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class            Previous (Kbps)        New (Kbps)           Previous (Kbps)         New (Kbps)
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 1: syntax error
(standard_in) 1: syntax error
 0                        0.0                0.0                       0.0                0.0

 TEST MODE: No changes were made.

Same thing here with SPDMerlin 3.4 and AutoBW 1.5

 

[Kingp1n]

Same thing here with SPDMerlin 3.4 and AutoBW 1.5

No issues with AutoBW and SPDMerlin 3.4.

 

[joe scian]

Issues below after upgrading Spdmerlin to 3.4.0 - dos2unix is not the problem here

SIMULATION MODE: No changes will be made.

               --------------- SPDMERLIN --------------
                 Download (Kbps)       Upload (Kbps)
               -------------------  -------------------
Running  1 of  3 speedtest, please wait... (standard_in) 1: illegal character: ^M
(standard_in) 1: illegal character: ^M
(standard_in) 2: syntax error
(standard_in) 2: syntax error
Test  1 of  3           0.0                  0.0
Running  2 of  3 speedtest, please wait... (standard_in) 1: illegal character: ^M
(standard_in) 1: illegal character: ^M
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Test  2 of  3           0.0                  0.0
Running  3 of  3 speedtest, please wait... (standard_in) 1: illegal character: ^M
(standard_in) 1: illegal character: ^M
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Test  3 of  3           0.0                  0.0
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Average                 0.0                  0.0
Scale Factors          0.85                 0.85
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Scaled Speeds           0.0                  0.0
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand
(standard_in) 1: syntax error
[: 1: unknown operand

               ----------------- QOS -----------------
                Download (Kbps)        Upload (Kbps)
               -----------------     -----------------
Previous              47616.0             18432.0
New (from above)          0.0                 0.0
(standard_in) 1: syntax error
(standard_in) 1: syntax error
Scaling by              0.000               0.000

              ====================================== DOWNLOAD ======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class               Previous                New                 Previous                New
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 2: syntax error
(standard_in) 2: syntax error
11                14284.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
10                 2380.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
13                 4761.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
12                11904.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
15                 4761.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
14                 4761.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
17                 2380.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
16                 2380.0 Kbit       printf: invalid number 'Kbit'
       0.0 47616       printf: invalid number 'Kbit'
       0.0 Kbit              0.0

              ======================================= UPLOAD =======================================
               ----------------- RATE -----------------    ----------------- CEIL -----------------
Class               Previous                New                 Previous                New
-----          -------------------  -------------------    -------------------  -------------------
(standard_in) 2: syntax error
(standard_in) 2: syntax error
11                 5529.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
10                  921.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
13                 1843.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
12                 4608.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
15                 1843.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
14                 1843.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
17                  921.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0
(standard_in) 2: syntax error
(standard_in) 2: syntax error
16                  921.0 Kbit       printf: invalid number 'Kbit'
       0.0 18432       printf: invalid number 'Kbit'
       0.0 Kbit              0.0

 SIMULATION MODE: No changes were made.

 

[PeterR]

Issues below after upgrading Spdmerlin to 3.4.0 - dos2unix is not the problem here

Same error here.

 

[Jack Yaz]

Hotfix pushed for spdmerlin, please update. This should resolve errors in AutoBW. (why SQLite exports csvs with DOS line endings when running in a Unix environment is beyond me...)

 

[Jaime Alvarez]

Working again! Thank you