• ATTENTION! You'll notice a Prefix dropdown when you create a thread. If your post applies to one of the topics listed, please use that Prefix for your post. When browsing the thread list you can use the Prefix to filter the view.
  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

dave14305

Part of the Furniture
only @john9527 interpreted it differently.
You can still do it your way if you venture into modifying state.js instead of menuTree.js.

https://github.com/john9527/asuswrt-merlin/blob/374.43_2-update/release/src/router/www/state.js#L515
https://github.com/john9527/asuswrt-merlin/blob/374.43_2-update/release/src/router/www/state.js#L531
See: [Fork] Asuswrt-Merlin 374.43 LTS releases (V44E5)

If you go this path, there’s another aesthetic issue with the left menu bar not highlighting when a user page is selected. Need further changes to state.js depending on your asp filename and your desired L1 tab number.
[Fork] Asuswrt-Merlin 374.43 LTS releases (V44E5)
 

john9527

Part of the Furniture
Just my opinion....
I tried to provide a simple way to support addons that doesn't require messing with the base firmware gui code (state.js/menuTree.js). I believe that multiple developers messing with that code is a recipe for disaster and eventually we'll get a conflict/breakage.
 

elorimer

Very Senior Member
[Error] No compatible device(s) found to install
Diversion on.
This happened to me a few days ago out of the blue. The thumb drive wasn't being seen. Unplugging it and plugging it in again fixed it for me.
 

QuikSilver

Very Senior Member
This happened to me a few days ago out of the blue. The thumb drive wasn't being seen. Unplugging it and plugging it in again fixed it for me.
I agree, check to make sure thumb drive is recognized and mounted.
 

Mutzli

Very Senior Member
I've pushed a Diversion update, no version change

- NEW : Option to enable the Diversion WebUI beta in d.
- CHANGED: Dnsmasq and pixelserv-tls operation functions to make them compatible with the new WebUI functions.
So far so good, Home page and both tests work fine.
 

AntonK

Very Senior Member
I've pushed a Diversion update, no version change

- CHANGED: WebUI beta minor error correction, page switch loading time set to 1 second.

Please report inconsistencies and errors.

Use the WebUI to update, or if your really must, use u to update.
I used the WebUI to update, and received an apparent error (attached). I checked the Diversion Web Update.log (attached), which didn't seem to show any glaring problems. I then attempted an update via WebUI again, and it showed all was good and up-to-date without needed to update. So, it looks like it worked the first time, but threw an false error. FYI.
Annotation 2020-05-31 100139.jpg
 

Attachments

  • Web Update Error Log.txt
    1.8 KB · Views: 50

Asad Ali

Very Senior Member
I used the WebUI to update, and received an apparent error (attached). I checked the Diversion Web Update.log (attached), which didn't seem to show any glaring problems. I then attempted an update via WebUI again, and it showed all was good and up-to-date without needed to update. So, it looks like it worked the first time, but threw an false error. FYI.View attachment 23823

I received the same issue.
 

thelonelycoder

Part of the Furniture
I used the WebUI to update, and received an apparent error (attached). I checked the Diversion Web Update.log (attached), which didn't seem to show any glaring problems. I then attempted an update via WebUI again, and it showed all was good and up-to-date without needed to update. So, it looks like it worked the first time, but threw an false error. FYI.
I received the same issue.
One could say that error is more an assumption than a real result of the update process. Will be sorted and done right with a next release. Thanks.
 

martinr

Part of the Furniture
I've added a one second delay, see if that helps.
Sorry, Martin: no difference; when I select one of the other tabs, I still have to wait for the swirling circle to complete, and then - because the original tab remains on show - have to select that new tab a second time (and wait for the swirling circle to complete) before it will switch to the new selected tab. And it makes no difference which of the 3 tabs is selected to switch to.

Tried also with my iPad (as well as my iPhone) but same thing.

If I’m the only one who has this, then clearly it’s not worth wasting time on.
 

DAVID LONG

Regular Contributor
I'm not sure if it was intended but I have this large banner when I hover over the name...

banner.jpg
 

QuikSilver

Very Senior Member

AntonK

Very Senior Member
Any specific reason to not use the Addons page? Technically Diversion is not a native part of Asuswrt-Merlin (well not yet wink wink) and it's an Add-on to Asuswrt-Merlin so all such script's Web-Ui should be under that page instead of scattered all over the firmware WebUI, that's just my two cents.

BTW it's looking nice!!
Agreed. What's Diversion page doing on the LAN panel? Let's put addons to the firmware on the Addons panel.
 

LimJK

Very Senior Member

thelonelycoder

Part of the Furniture
Sorry, Martin: no difference; when I select one of the other tabs, I still have to wait for the swirling circle to complete, and then - because the original tab remains on show - have to select that new tab a second time (and wait for the swirling circle to complete) before it will switch to the new selected tab. And it makes no difference which of the 3 tabs is selected to switch to.

Tried also with my iPad (as well as my iPhone) but same thing.

If I’m the only one who has this, then clearly it’s not worth wasting time on.
Instead of clicking the button again after, what shows when your refresh the page?
 

thelonelycoder

Part of the Furniture

thelonelycoder

Part of the Furniture

martinr

Part of the Furniture
Instead of clicking the button again after, what shows when your refresh the page?
Bingo! That’s it, Martin. Why didn’t I think of that? Refreshing the page does the trick. (For the record, identical behaviour in 3 different browsers, Edge, Safari and Chrome. But I’m sure that’s what you would have expected.)
 

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top