dual wan

Hello all, I had my AC5300 running 384.10_2, with one WAN connection, two VPN connections, and some clients strictly locked into using the VPNs with "Block routed clients if tunnel goes down" working flawlessly, prior to today. Today a second WAN connection was installed and I enabled "Dual...

I thought I set up my dual wan properly, but last night when the primary WAN went down, the router didn't fail over. On checking, I noticed it was reporting "cold-standby": https://www.dropbox.com/s/0h7casz1co1ic38/Screenshot 2018-12-27 10.15.54.png?dl=0 Here are the dual-wan settings...

Summary: I'd like to access my LAN/the resources in my LAN via a VPN-connection with a mobile broadband connection. Network properties: RT-AC88U router with local IP 10.100.200.1 connected to a high speed network with private WAN IP 192.168.1.x and capability for dual WAN, 4G-AC53U mobile...

Hi, I have an ASUS RT-AC5300 configured in dual WAN load-balancer mode I'm using a script to send upload intensive traffic out via WAN0 and download intensive traffic out via WAN1. The problem here is that WAN1 intermittently drops out and I'd like it to failover if this happens. Does anyone...

Hi, Here's my scenario: My kit is an ASUS RT-AC5300 running Merlin 384.6 firmware with a second AC5300 working as a hard wired AP. I have terrible UPLOAD on my home broadband. I mean TERRIBLE. It is on average 0.4Mbps! My download on home broadband is 12-18Mbps. I've spoken to everyone and...

I visit a holiday house occasionally with no internet. I have left an 87U router there running Merlin firmware. When I visit I simply tether an Android mobile via USB to the router and it works beautifully. However, unlike the normal wan setting there is no facility to set the DNS servers...

I have 2 cable networks and want use one as failover. These are my settings: Primary WAN: WAN Secondary WAN: LAN 4 Dual WAN Mode failover with Allow failback Detect Interval 5 seconds Failover Execution Time: Continuous 12 times (60 seconds) detect network failed Failback Execution Time...

Trying to set up an AC68U running latest stock firmware for dual WAN with load balancing. The manual and FAQs available from ASUS provide no information about setting up routing rules. I have scoured the web and the information is confusing and often in conflict. I want to clarify a few...

Good afternoon everyone. I purchased this E1 revision router - there was an official firmware of the latest version, I tried different versions of the firmware from Merlin but the problem with Dual wan stayed. When you turn on dual wan and connect 2 cables of the same provider, the Internet...

I apologize, but I'm completely new to Merlin and I don't even have router yet with Merlin on it. I'm interested in a Dual-WAN configuration using an RJ45 connection for the second WAN port, possible reconfiguring one of the LAN ports, rather than using USB tethering. Is this possible to...

Hi there! I have an ASUS RT-AC86U. Currently, when I am using Dual WAN, I get speeds of about 120 Mbps, with just a single WAN, my speed is limited to 60 Mbps. However, when I turn on OpenVPN (single client connected to a VPN server) with dual WAN enabled the speed does not exceed 60 Mbps when...

We have two ISPs, both via fixed wireless. The first is 10Mbps but between 7pm and 11pm we often get maybe 0.5Kbps - slower than dialup - or nothing at all. The second is 5Mbps but works all the time, and has a lower monthly cap (except between 1am and 6am when there's no cap). So, I'd like to...

Firstly, my apolozises if this has already discussed in this forum. I am looking to route selecting devices thru secondary wan and majority of the devices on Primary Wan. I dont want load balance option. Is there an option? if yes, please help with simple steps. thanks

Hello everybody, I would like to hear, what features do you miss with your ASUS routers, what features are not working properly here are few that I am missing for personal/small-business use 1. Dual WAN issues: Failover not working properly (DHCP with 0.0.0.0 is considered as working...

Hello, My hardware is as follows: - Asus AC68U (running merlins firmware) - BT Openreach Huawei fiber modem (connects to Asus AC68U) - BT smarthub (new ISP equipment, not yet installed) - Sky Hub (not in use currently) I currently have one ISP but I am having a second line installed with...

I tried out the Dual WAN feature the other day using an Android phone on USB as Secondary. I have several port forwards which seemed to quit working as long as Dual WAN was enabled (secondary connection was not necessary). The port forwards would not work while using Primary WAN until I...

This originated in this thread. December 23 2018 The Dual WAN helper script is no longer available to download. See this post for details. dual-wan-helper is a script that continuously runs in the background once triggered by wan-start and pings a set domain. When ping fails it will restart...

Hi all, Sorry for my English unfortunately it's not my mother tong :-). So due to my poor ADSL connection i just bought an Huawei E5810 4G routeur, and i wanted to use my ASUS RT-AC87U Dual Wan feature to load balance my client connections to internet. But i was surprised by one thing, the...

I have both a wan connection and my T-mobile V10 phone with android tethering enabled. I've tried Wan Primary and USB secondary which appears to work fine but when trying USB Primary and Wan Secondary it always shows the secondary WAN as cable unplugged. I'm on the latest stable build that I...

Hi Guys! I'm working with stockmarket and I need a router to do the failover, so I found that both RT-AC68P and RT-AC87U have dual wan configuration with failover option on it, I already have 2 links (120mb cable and 200mb fiber) so my question is: Is the RT-AC68P good enough to do the job or...