Beta Asuswrt-Merlin 3006.102.5 Beta is now available

[RMerlin]

Directly after a fresh boot:

I've seen something similar happen once a few weeks ago during testing but I have been unable to reproduce it since then. As verbose mode indicate tho these are not duplicate, they are different rules. I suspect it's a timing issue when configuring firewall rules.

- What router model?
- What type of traffic is configured on your VPN server (LAN, WAN or both)?

 

[ccleeland]

My AX88U_Pro is currently on 3004.388.8_4; is it safest to move to the released 3006 version before trying this beta?

 

[MarkusI]

I've seen something similar happen once a few weeks ago during testing but I have been unable to reproduce it since then. As verbose mode indicate tho these are not duplicate, they are different rules. I suspect it's a timing issue when configuring firewall rules.

- What router model?
- What type of traffic is configured on your VPN server (LAN, WAN or both)?

Regarding the rules, you're right - I didn't check it in verbose mode.

I have a RT-AX88U-PRO and VPN is configured to INTERNET only.
I can 100% reproduce the issue every time if I reboot the device.

I checked what happens if I configure VPN to BOTH with the following result

Chain OVPNSF (1 references)
 pkts bytes target     prot opt in     out     source               destination      
    0     0 ACCEPT     all  --  any    tun21   anywhere             anywhere        
    0     0 ACCEPT     all  --  tun21  any     anywhere             anywhere        
    0     0 ACCEPT     all  --  any    tun21   anywhere             anywhere        
    0     0 ACCEPT     all  --  tun21  any     anywhere             anywhere

Additionally, in order to sort out some weird configuration side effects, I also started a second VPN server without changing any configuration (both in INTERNET only).
Results:

Chain OVPNSF (1 references)
 pkts bytes target     prot opt in     out     source               destination      
    0     0 ACCEPT     all  --  any    tun22  !192.168.1.0/24       anywhere        
    0     0 ACCEPT     all  --  tun22  any     anywhere            !192.168.1.0/24  
    0     0 ACCEPT     all  --  any    tun21  !192.168.1.0/24       anywhere        
    0     0 ACCEPT     all  --  tun21  any     anywhere            !192.168.1.0/24  
    0     0 ACCEPT     all  --  any    tun22   anywhere             anywhere        
    0     0 ACCEPT     all  --  tun22  any     anywhere             anywhere        
    0     0 ACCEPT     all  --  any    tun21   anywhere             anywhere        
    0     0 ACCEPT     all  --  tun21  any     anywhere             anywhere

Let me know if I can do more tests.

Cheers,
Markus

 

[BlueFrog]

I have a GT-BE98 Pro and since upgrading to Beta1 and now Beta2, all of my wired windows machines cannot exceed 250mbps. I have 3 of them. A Windows 10, a Windows 11, and a Server 2025, all of them are effected. Wifi testing on the same laptops and phones, I am getting 1.2gbs from multiple devices, but all of my eth attached devices are now maxing out at 250mbs. I speed test from inside the Merlin interface on the router gives me 1.2gbs. QOS is off and no settings where changed.

 

[visortgw]

I have a GT-BE98 Pro and since upgrading to Beta1 and now Beta2, all of my wired windows machines cannot exceed 250mbps. I have 3 of them. A Windows 10, a Windows 11, and a Server 2025, all of them are effected. Wifi testing on the same laptops and phones, I am getting 1.2gbs from multiple devices, but all of my eth attached devices are now maxing out at 250mbs. I speed test from inside the Merlin interface on the router gives me 1.2gbs. QOS is off and no settings where changed.
View attachment 66874View attachment 66875

No such issues here.

 

[bacon612]

Installed 102.5 beta 2 the other day on my BE88u. Everything seems to be working ok with the exception of my 5ghz radio. I noticed walking by my router that the LED light was off. When logging into the webui, i see half of the green wifi symbol lit.when i hover over this green wifi lcon, it lists my 2.4ghz channel as 11 (which it is) and the 5Ghz channel as 0. Site survey works for 2.4ghz but says 5ghz radio is disabled but under wireless settings everything is set to auto and i can see that as far as the UI is concerned, its on. It has been working fine since about mid January. Only thing I have changed is disabling wifi7 as it gave me grief on one phone that uses my network.

I am running asus mesh and thankfully, my two mesh nodes (ax58u and ac68u) are still broadcasting their 5ghz radios.

Any ideas on where to go from here short of a factory reset and reconfigure? These latest builds allow you to edit wireless settings in the 'Network' sub menu (where Guest, IOT and MLO settings live). Should I remove the 5ghz radio from here and re-add it? It seems strange that asus now lets you configure wifi settings in two places.

Any thoughts?

Edit: Attached image showing 5ghz disabled. I have tried to enable and disable the radio and apply settings several times. No luck. I never tried beta 1 Came from 102.4.

Seems that others are having issues with radios since beta 1. I think ill sit tight as my mesh nodes are still broadcasting 5ghz until maybe a new firmware is available.

Edit2: is there a way to ssh in an force the radio on?

 

[David Williams]

On my 2Gbig fibre in this beta (beta 2) and previous beta (beta 1) I notice that the Internet Speedtest for uploads seems to be way off. Before the upgrade I was getting proper speeds but since the upgrade Im getting less than 200Mbps.

If I run a speedtest from a wireless device on the same network I get the following:

I know that Boost Mobile is in the same AT&T datacenter.
I know it could be an issue with the speedtest AT&T server but wanted to report just in case others might be seeing similar issues.

Wanted to add little more information:
Main Router is BE96U
Two mesh network nodes are RT-AX86U Pro
The two mesh network nodes and router are connected via 2.5GB network switch

The wireless laptop is connected to the closest RT-AX86U

 

[dave14305]

My AX88U_Pro is currently on 3004.388.8_4; is it safest to move to the released 3006 version before trying this beta?

Get accustomed to the features of 3006.102.4 before becoming a beta tester. With any luck the final 102.5 release will be available by the time you get used to it.

 

[RMerlin]

it lists my 2.4ghz channel as 11 (which it is) and the 5Ghz channel as 0.

Channel 0 usually indicates either the radio is crashed, or the settings are corrupted. Try first to do a complete power cycle of the router do reset the hardware. If it still fails, next step is to do a factory default reset and manually reconfigure it.

After that if it still shows channel 0 then you probably need to RMA the router.

 

[RMerlin]

I have a RT-AX88U-PRO and VPN is configured to INTERNET only.
I can 100% reproduce the issue every time if I reboot the device.

These are leftovers from the imcomplete SDN implementation for OpenVPN servers. I disabled that with https://github.com/RMerl/asuswrt-merlin.ng/commit/3e997529348cc9ab9cc96cd3add20af12fb9fd59 but I forgot to apply the same fix to the Wifi 6 branch.

 

[MarkusI]

These are leftovers from the imcomplete SDN implementation for OpenVPN servers. I disabled that with https://github.com/RMerl/asuswrt-merlin.ng/commit/3e997529348cc9ab9cc96cd3add20af12fb9fd59 but I forgot to apply the same fix to the Wifi 6 branch.

Ah, great you saw that!
Will it be part of the upcoming builds then?