client list

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    BE88U and Wifi 7 connected smartphone not shown in Client List and Wireless Log

    Got my BE88U yesterday and reconfigured all my devices. At this point I have only one Wifi 7 capable device, my Android smartphone. I can successfully connected my Android smartphone via Wifi 7 and the 160Mhz channel bandwidth, however, the smartphone isn't shown in the client list and also not...
  2. thedarkness

    Client list is not updating for all devices

    Hello, I have an RT-AC86U running 386.11 Merlin firmware and only recently I started to see an issue with the client list. I relied on the client list for a long time without issues - this feature allows Home Assistant to know if a device is connected or not. Since a couple of months I noticed...
  3. S

    ntpMerlin no clients shown

    Hi! Sometimes after powering on/booting my router "chronyc clients" doesn't show any clients in the list although chronyd obviously works because it serves the time to clients requesting it: operator@homerouter:/tmp/home/root# chronyc clients Hostname NTP Drop Int IntL...
  4. T

    Client List Woes

    I've searched and read through a few threads about this and didn't see anything similar and the answer may be be as simple as "Client List is closed source," but here goes... My two issues with the Client List are thus: Devices connected to the guest network will display an IP address that has...
  5. M

    RT-AX88U UI crashing when looking at network maps or AiMesh

    Just this afternoon, when I login to the web interface on my RT-AX88U I can get it to crash in a couple of ways. 1st if I click the "View List" on the network map page, it will display an empty list, then my browser says the page is slow. After a few seconds more it displays the client list...
  6. S

    Media Briged Clients Not Appearing on Client List (AX88U/AX58U)

    I have an RT-AX88U as my primary router and an RT-AX58U as my media bridge; both are running the latest Merlin firmware (384.17). While the clients connect fine, they do not appear on the RT-AX88U's "client list" which makes port forwarding and other things annoying. Previously, I used an...
  7. S

    Dropdownlist for Policy routing.

    @RMerlin Feature Request: Is it possible to make/create a client name dropdownlist in the section: VPN client for Offline Source IP's when policy routing is desired? This would be wonderful in terms of convenience and adding clients error free with different IP's by head or copy paste from a...
  8. Tattz The Bear

    Asus DSL-AC68U Upgrade to 3.0.0.4.384_81981. Was it me or them?

    On Friday I noticed an alert on my router for new firmware so hit download. Part way through the process I noticed I was still connected to my VPN so disconnected; Bad move. :( Needless to say the download aborted and I subsequently manually downloaded the firmware from the Asus support site...
  9. N

    GREP commnad Reading through file Question

    I have a need to read through the client list on my asus router RT-AC66U_B1 with Merlin Firmware Version:384.10_2 and if I find the MAC address I am searching for in the file location "/tmp/clientlist.json, I will execute a "CURL" command. What I have, so far is this logic that i copied from...
  10. F

    Network clients split between router and AP

    Hello all. New to posting so bear with me. I have an Asus RT-AC68R in wireless router mode/AiMesh Router Mode and an Asus RT-AC68W in Access point (AP) mode/AiMesh Router in AP mode. I've been doing some cleanup of devices, etc. and found that the client list of each device shows different...
  11. H

    Network Map and Client List missing on my Asus RT-AC68U after firmware upgrade

    Hey All, So i've done a search here but haven't found a solution. I have an asus RT-AC68U and had Merlin's 380.68.4 firmware on it. I updated to 384.13 and since then all my Client list/network map has stopped working. I can still find the names of connected devices in the system log and DHCP...
  12. Mister Craft

    Client list not showing any devices

    Running the RT-AC88U, firmware version 384.4_2 and I'm unable to see the client list. I've had this issue with previous firmware updates as well. I've searched the forums but couldn't find anything so apologies if something is already out there. Is it just me or is this a known issue? Any help...
  13. G

    384.4 on 87U Shows all 5g devices as wired

    I installed the latest version 384.4 and all my 5G devices are being listed under "wired" in the client list screen. The 5G list is always empty ta
  14. Adam Siemiginowski

    Device in Client List BUT NOT Traffic Analyzer Client List

    I have several devices listed on my Network Map Client List BUT NOT my Traffic Analyzer Client List. Some of them have a Fixed IP in the DHCP Server by MAC Address. To be specific... This is a thermal printer which often loses connection, and I am trying to identify why - with a combination of...
  15. DaveLessnau

    Clients Showing up in AP Mode?

    I was using my RT-AC66U as a full router with Asuswrt-Merlin 380.62_1. I got a pfSense box to do the routing function, switched my AC66U over to Access Point mode (for my wireless devices), and connected it to a switch with all the rest of my wired devices. Looking at the client list in the...
  16. sentinelvdx

    Question - Identify Guest's clients from 2.4/5G clients

    Hi, I'm looking to identify which clients belongs to 2.4/5Ghz from Guest's Wireless. WebGUI does not differentiate them, so I was looking maybe through SSH command? Thanks in advance,
  17. J

    Client list behavior question

    Hi all! This is my first post about a strange behavior i have with the client list in my RT-AC68U. I guess it is not merlin related (didnt test with stock firmware yet). First my network configuration: modem --- RT-AC68U(router) --- loco M5(bridge) - - - <air> - - - loco M5 (bridge)---...
  18. A

    2.4Ghz wireless mode "auto": defaulting to Ch. 14; can I disable 12-14?

    I am using HGG's 380.59.1 fork on my RT-ACU. We are getting a range extender, but for the time being, have a very weak signal downstairs. Trying to optimize it but still get all of my devices to connect. The problem device is my Brother HL-L2380DW, which runs on the N standard, but it only runs...
  19. F

    What happened to traffic monitor in real time, sorted by clients?

    So I just decided randomly to update my Merlini firmware. After the update, the feature where I see a nice drop-down list of clients and their Mbps is gone. What happened? RT-AC66U here btw
  20. glycerin256

    Asus AC87U wireless clients showing as wired

    Greetings, I just picked up anAC87u and am having a few issues. I'm upgrading from a AC68u. There are quite a few wireless clients connected through it, but some of them are showing up as wired in the connected client list on the home page. How could this be? There is only one device directly...
Top