gigabit

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. cdysthe

    Alternative firmware for my R7000 on a gigabit connection supporting CTF)

    Hi, I have a Netgear R7000 running behind a Netgear CM1000 modem on a gigabit cable connection. Running updated stock FW. I get up to 930 Mbps down which is not bad I think. I do not have any features like parental controls or QOS enabled. As soon as I enable any features speed drops to around...
  2. D

    Asus RT-Ac1750_B1 tanking speeds

    I'm a former verizon employee with what should be the gigabit connection (940/880 though you almost never get that honestly) and so I knew from work experience to abandon their crappy Quantum gateway router. I instead have a Asus RT-Ac1750_B1 for a small apartment and mostly wired connected...
  3. P

    RT-AC88U Stuck at 100 Mbps

    Hey all, Recently picked up an RT-AC88U and noticed that no matter what I do, I can't get it to negotiate 1Gbps for any of the LAN ports. I upgraded from a (now dead) 68U that was flashed from T-Mobile junk back to vanilla and it worked fine for all four ports. One of my two wired systems...
  4. L

    Asus RT-AC87u and gigabit internet speed.

    Hey folks, I just upgraded my xfinity internet from 250 to gigabit speeds. Here is my current setup 1. Modem - Netgear CM1000 2. Router - Asus RT-AC87U running latest merlin firmware 3. Multiple devices on AC wifi Wired connection is getting good download speeds. up to 900+ Mbps, but when on...
  5. cdysthe

    Netgear R7000 isn't up to speed on a gigabit connection through CM1000 modem

    Hi, I recently got a Netgear CM1000 modem on my gigabit Xfinity connection. When I hook my laptop up to the modem directly I am getting close to a gigabit connection, at least above 900 Mbps consistently. But when I hook up (ethernet) through my R7000 with fully upgraded stock firmware I'm...
  6. T

    Best option for CenturyLink Gigabit fiber

    So, I have been trying for the last couple of months to come up with an optimal solution for improving my CenturyLink Gigabit fiber. I have the CL ZyXel C1100Z. Terribly slow interface, but accelerates PPPoE well and if all I was doing was browsing the web, this might be good along with a...
  7. M

    Lacie NetworkspaceMax LAN problem

    Hi all, I try to ask you because I did a lot of checks but solution seems not be so easy. I summarize the scenario: 1) Network configuration: ADSL Router --> Netgear R7000 Router (1GBit/s LAN) --> NetworkSpaceMAX NAS (1 GBit LAN). Transfer rate from wi-fi very good with NAS. 2) 1 week ago NAS...
  8. Julio Urquidi

    D-Link Intros DGS-1210/ME Line Of Switches For Service Providers

    The new family of Layer 2 managed metro switches is designed for internet and video providers that service business customers. The DGS-1210/ME series of business switches come in 8-, 24- and 48-port models. The 8-port model has two additional Gigabit SFP ports, and the 24- and 48-port switches...
  9. H

    Buying advice: dual wan gigabit router for newbie

    Hi! This might be my first post here as far as I can remember. I have two ISPs, one is cable with 120mb down/5mb upload and the other one is fiber with 200mb down/100mb upload. I have a Asus AC87U that I've purchased to use dual-wan (load balance bonding?) and have better speeds (320mb...
  10. B

    Poor download speed over WiFi with Asus RT-AC3200

    I recently purchased an Asus RT-AC3200. I've now set it up, downloaded and installed the latest version of firmware from Asus and I'm not getting the download speeds over WiFi that I was expecting to get. The WiFi signal is strong (dB signal strength/attenuation figures are 2.4 GHz -52 dBm and...
  11. mjsmith79

    FS: QNAP TS-653A-4G 6 Bay NAS Enclosure

    QNAP TS-653A-4G (4GB RAM version) 6-Bay Professional-grade NAS. Intel Braswell Quad-core 1.6 GHz CPU with Media Transcoding Price: $680 + $25 (UPS Ground), pick up available (Upland, CA) Condition: Brand new, in unopened box No hard drives included. Retails for over $750. Features (from...
  12. Julio Urquidi

    Ubiquiti Adds Three Managed Switches To Its UniFi Platform

    The three new managed switches are part of Ubiquiti’s UniFi SDN platform. All can be managed from the same UI, giving more control to IT as networks grow and need management to the edge. The new UniFi switches include: US-16-XG - sixteen 10G ports (4 x RJ45 and 12 x SFP+) US-8-60W - eight...
  13. N

    Best router for a symmetric Gigabit connection

    Hi there! I'm currently using an Asus AC68U for my symmetric gigabit connection and—whilst I'm certainly not complaining—it seems to take around 300mbps off my connection speed (both wired and AC wireless), presumably due to limitations in the CPU/RAM. Does anyone have any go-to recommendations...
  14. R

    1 Gbps Internet - Possible over WiFi?

    I now have 1 Gigabit symmetrical internet at home :) and looking to make the most of this over WiFi. From my research, it seems like 400-500 Mbps seems to be the max achievable over WiFi, with like an Asus RT-AC68U. But my question is, if I was to purchase a Tri-band router and install a...
  15. wallaby32

    [AC1900P] BB variant of AC68U(I think) Overclocking? yes or no?

    Hello, Been using this router for about 2 weeks. It's pretty much a beast. But, I was wondering with the new bootloader version that Asus is using, is it possible to Overclock? standard clock is at 1.4ghz. with a small fan I can keep CPU temps down to about 62C and I would like to push the...
  16. wallaby32

    Quick question about RT N66U and At&t Gigapower

    I did some searching on the forums and couldn't find any answers that completely satisfied me. So, technician appointment on Monday (aug 29th) to bring a new At&t modem and register it for the new Gigapower service in my area. (1 gbps down/up) This is all I am saying about the modem since it...
  17. Julio Urquidi

    StarTech.com Releases NBase-T NIC

    Dubbed by StarTech.com as a 5-speed NIC, the company announced its new single-port PCIe NBASE-T Ethernet network card, the ST10GSPEXNB. The new PCIe 2.0x4 NIC supports 10, 5, 2.5, 1 Gbps and 100 Mbps networks, 16K jumbo frames, 802.1q VLAN tagging, and Auto-MDIX. A low power consumption...
  18. T

    LAN / WAN issues when moving GB's of data via gigabit

    Hi. I'm having an issue when I copy data from a PC to my NAS ay gigabit speeds. My Router is an Asus RT-68U ROUTER --> Port 3 --> Printer | | | ---> Port 1 --> NetGear GS108PE Switch | VLAN10 | --> Port 1 --> NAS Synology (1000)...
  19. elelias

    ASUS RT-AC88U with symmetric 1Gbit/s connection

    Hi, I got myself 1Gbit/s download/upload and I'm using a brand new ASUS RT-AC88U. However, I'm running speed tests and I see results which are far from the promised performance. Example: http://www.speedtest.net/my-result/5305585555 I read somewhere that this may be related to NAT...
  20. G

    VLAN Tagging + Gigabit Performance + 200/100 Connection

    Hi there guys, I'm doing some research to find an alternative to my router. I live in Brazil and most ISPs provide us a terrible router for "free". In my case it is a SAGEMCOM F@ST 5340. Some points: *I live with 4 friends and we share a 200/100 fiber connection. *Most of the heavy load is...
Top