Release Asuswrt-Merlin 3006.102.5 is now available

[Syl]

Can you please check the guest networks? Mine are rejecting connection after a reboot cycle.

I don't use guest networks. I have a precarious balance of nearly 100 IOT devices across both 2.4 and 5ghz along with two nodes and I don't want to possibly break that.

I'm starting to get some odd messages in the system log though, Most of it appears to be related to amtm but this is a new one:

Aug  8 10:54:25 connmon: **WARNING** JFFS Available Free Space (2.14MB [5.1%]) is getting LOW.

Though it seems to have auto corrected itself.

 

[sl4fko]

How did you install Transmission? Probably stored on the external drive.

No idea... How do I check that?

 

[RetroPas74]

Dirty upgrade from 3006.102.5 Beta 3 to 3006.102.5 on GT-AXE16000 - everything running smooth.
Thanks.

Update 8/8: uptime 5 days but I just noticed that my IoT devices configured in my guest network pro VLAN disconnect briefly for about 5-10 seconds and then reconnect - just noticed while watching TV and my Sonos Arc soundbar and sub disconnected; Happened now 4 times so far that I am aware of.
Anyone else seeing something similar?

 

[bennor]

Update 8/8: uptime 5 days but I just noticed that my IoT devices configured in my guest network pro VLAN disconnect briefly for about 5-10 seconds and then reconnect - just noticed while watching TV and my Sonos Arc soundbar and sub disconnected; Happened now 4 times so far that I am aware of.
Anyone else seeing something similar?

What do the router system logs show for the Guest Network Pro client WiFi disconnect/reconnect?

 

[RetroPas74]

What do the router system logs show for the Guest Network Pro client WiFi disconnect/reconnect?

I just checked the system logs and cannot see anything during that exact time.
Would changing the “Default message log level” show more details?

 

[Morpheus2020]

Hy

I have a rt-be92u. Is that normal, in wifi menu/professional the universal beamforming and explicit beamforming and wifi 7 ofdma wifi 7- mu-mimo not showing.
I installed the last 3006.102.5 firmware. Deleted the browser cache, i tried another browser. Tried the router factory reset. But when i put back the last 3.0.0.6.102_37563 original firmware the menu is working.

Same on my RT-BE88U AP mode.
I have tweaked those options that were removed in the 102.5 firmware. I don't know if these deleted options have any effect on WiFi.

 

[FourthandShort]

Anyone having issues with clients not connecting on the same SSID via WiFi?

I have a ton of clients which are not reconnecting and when I try and manually add them to the WiFi it’s failing over and over. I see them sometimes on the client list but not really sure what’s going on.

 

[Mutzli]

Anyone having issues with clients not connecting on the same SSID via WiFi?

I have a ton of clients which are not reconnecting and when I try and manually add them to the WiFi it’s failing over and over. I see them sometimes on the client list but not really sure what’s going on.

This could be a problem with your WPA settings. If you have older clients, they might have a problem with the mixed WPA2/3 setting? It could be they only support an older version of WPA2. Try to setup a separate network under 'Network' that only runs WPA2 and see if that solves the problem.

Edit: The latest security fixes might cause issues in mixed WPA2/WPA3 mode, since it relies on newer negotiation mechanisms. Older clients—even if they support WPA2—may not handle the handshake properly if the access point expects WPA2/WPA3 capabilities.

 

[TnF]

I have an issue with the 2.4ghz interface just disappearing from client devices a few mins after reboot (hot and cold). I am pretty sure i didn't have this issue on 3006.102.4
RT-BE92U
attached log, cleared->reboot->wait until 2.4ghz disappears
I've played around with various settings, only a reboot will make the WLAN interface come back:/