What's new

Enable baby jumbo frames on pppoe connection

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

on the WAN side? that's MTU and MRU.
on the LAN side, it's under Switch Control
 
on the WAN side? that's MTU and MRU.
on the LAN side, it's under Switch Control
the WAN settings the mtu and mru control only goes to 1500, on lan side i see nothing to do with jumbo frames and with mtu and mru set to 1500 the ppp0 interface reports an MTU of 1492 in ifconfig
 
Advanced Settings > LAN > Switch Control in the GUI (Jumbo Frames Enable...might as well engage Spanning Tree while you're there)
I wouldn't worry about it unless you've an IPv6 ISP, because IPv6 will determine what's best for the connection automagically
 
1695308504308.png

no jumbo frame option
 
Merlin is no different than stock firmware in this regard, unless Asus changed something for the 3.0.0.6.xxx branch.
 

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top