ac68u

I have issues trying to route traffic from tcp port 51413. I have the feeling it's something simple that's staring me in the face, but can't for the life of me find what I'm missing so I was hoping for some extra eyes to help me out. The goal: Have only traffic (inbound and outbound) from port...

Hi there. I’ve been having issues getting some Nest Protects onto my network. Nest support are out of ideas, but I suspect the issue is because they need to use IPv6. I’ve just done a factory reset of my AC68U, and set it to use a native IPv6 WAN connection, and stateful LAN. However my device...

My base router is an Asus AC87U, and I'm using an AC68U as a repeater. Works pretty well; the AC68U reports "Link rate: 234 Mbps, RSSI: -58 dBm" and we get up to 60 mbps (of our 200mbps) through it. The AC87U is in the guest house/office, with just 1 ethernet client, and the AC68U is in the...

Hi, I have some issue when setting up the openvpn server. My firmware version is 384.13. I exported the configure file and imported on my android phone, which is running android 10. I am using UDP wiht 1194. My ac68u is behind a modem/router. Port forwarding is setup on the modem. I can connect...

Hello Everyone, Here's the situation: Asus RT-AC86U (on thee way), plan to flash with Merlin, primary Aimesh router Two RT-68U's, one with Merlin, other stock firmware, Aimesh access points/nodes Netgear CM-1000 Docsis 3.1 modem MaxxSouth 250/10 Mb/s cable Ethernet cable exists from primary...

Hi, I was trying to downgrade the CFE for overclocking, because CFE 1.1.1.2 does not allow overclocking. The original firmware were: CFE 1.1.1.2 Firmware: RT-AC68U_384.13_0 Hardware: REV E1 board rev 1.90 After backing up the original CFE and obtained the modified CFE, I flashed the 1.0.2.0...

I have a couple of RT-AC68Us (orig T-Mo CellSpots) which are running Merlin 384.13. Couple of months ago I OC'ed them to 1000,800. I now find that the temps are VERY high (2.4 GHz: 54°C; 5 GHz: 57°C; CPU: 90°C) even with very little load. The clock speeds were 800,666. I am trying to "down...

I have a EA6900 with xvortex cfe and it is stuck in boot after a firmware upgrade. I am unable to put the router in rescue mode to use mini web server to upload firmware. I tried serial connection but I am not getting cfe prompt to erase nvram and reflash. I tried Ctrl C as well as space and...

Hello! There is a router of Asus ac68u with merlin 384.12 insertion, lifted on it openvpn - everything works, but it became necessary that for the client certain ip was appropriated. Created the file in / jffs/configs/openvpn/ccd1/clients1 with such config: ifconfig-push 192.168.5.3...

My ISP has provided me with a CISCO EPC3928S modem/router. I have this set to Bridged mode and handle routing on my internal network using my ASUS AC68U. I need to access a specific website for my work, but cannot access it when i am connected to the ASUS AC68U. I have tried to tracert the...

Hi all, 384.12 worked fine on my AC66U_B1 in the beginning but I tried to do some changes in QoS and the Webinterface became severely unaccessable. Giving it a long time and reloading the main page serveral times it happen to start working so I reflashed 384.12 but the problem stayed. So I...

Seems like the AC66U-B1 and AC68U are essentially the same hardware? Or at least close enough for my needs, and pretty much indistinguishable if they're running Merlin. Anything beyond 30-40Mb/s is "fast enough" for me. Are there any concerns about non-removable antennas on the AC66U-B1? Are...

I've got an RT-N66U that I'm happy with, running Merlin 380.70. What it lacks is useful traffic monitoring and stats. Ideally, I want to be able to see what clients connect to what servers/web-sites, and when they're connecting. Bonus if I can store that data on a USB-drive, so it's persistent...

Hey guys, I have the RT-AC68U router using 384.11_2 Merlin firmware. My main device (desktop connected via ethernet) seems to interfere with another device (laptop connected via wifi) each time I start up a game to play or perhaps stream. The laptop is connected using the 2.4 wifi band. This...

A lightning storm burned the WAN port on my AC68U. I used the Dual WAN to use LAN1 as WAN. I noticed, however, that recently the web gui is virtually unusable over wifi. The login page loads instantaneously, but putting the credentials ends up in a white page with the browser "Transferring data...

I have a 50/50 connection, when I use OpenVPN, that changes from 50/50 -> 20/50 I traced the problem to the CPU. For some reason, when it downloads, it only utilizes half of 1 core (I know OpenVPN is an inherently single-cored process). For upload, it uses all the core - which btw results in...

I've been using Asuswrt-Merlin for a couple of months now and it is only recently that I've noticed that my Ethernet traffic is slower than my wifi traffic. My setup: 192.168.1.1 - router 192.168.1.6 - pc connected via ethernet (iperf3 server) 192.168.1.48 - macbook pro connected to 5Ghz...

I'm running Merlin 384.11 on my AC68U. I'm trying to find a faster method of switching DNSfilters for a particular device and wonder if it's possible to do so via script or otherwise. It's mainly a speed thing - it's a little effortful navigating and logging into the router admin site...

Asus RT-AC68U with 3.0.0.4.384.10_0 firmware. On my OnePlus 5T phone (Android 9.0.4) I have installed the Asus Router App for Android. When connecting the app to the router I have an 'INSIGHT' section and it recommends me to use a more secure connection 'Click to change to https protocol'. I...

Hi. :) My router after reboot changes disk names from sda to sdb & back, if I reboot another time. o_O I give labels to both disks - NET & NET2 ,but it happens again! :eek: WTF! :mad: What should I do to stop this?:(