ac88u

suddenly cannot connect to ac88u anymore no dhcp i rested the router using all the ways mini cfe,30 30 30, i rested the nvram still cannot connect unless i set the ip manually and it doesn't work all the time (only on first 5 minutes after boot) log in attachmenets

I have just upgraded my AC88U from Stock firmware (old one) to Merlin 384.8_2. I came across two issues. 1. Since right now I am using my 4G dongle as the only WAN connection so I am using my USB 2.0 port on the back for this purpose. With stock firmware, the internet light goes on whenever...

With the latest firmware update to the AC5300, the backhaul method is through the 5.2GHz channel and smart connect is now on dual band. I have an RT-AC5300 as my router for AIMesh and an AC88U as the node. The node is connected through ethernet and so I was wondering if I can move the 5300 back...

Hello. I am using latest Merlin firmware for my asus ac88u. I am having this strange problem with all my network printers. I have one printer connected with cable and one wireless. Both of them after some time which are idle and goes to sleep when I give a print from computers I get "Unable to...

Every time I try to insert an IP into the DHCP list, it gives the following error: How to Fix It? Note 1: No equipment in the DHCP list has access to the network or the internet. Note 2: I have already reset the router to the factory settings. Note 3: I tested with Firmware 384.6, 384.7...

tldr: is there any way to enable Bonding / Link Aggregation on an RT-AC88U while it is in Access Point mode? Long version: My network includes one GT-AC5300, one RT-AC88U, and a NAS. The 5300 is the main router, connected to the cable modem. The NAS supports Link Aggregation, and I want to...

Hi guys! I have a RT-AC88u running Merlin's firmware. As I had some points where the signal wasn't so good, I bought a TP-Link repeater RE650. The combo is ok, and I have set fixed IPs to all my devices on the router. The question is that when a device connects through the repeater, its MAC...

Hello Everyone, new user here and this is my first post. I badly need help. Issue started after I updated the firmware to Merlin 384.6. Then I went to the WebUI and clicked the Initialize option Restore / Save/ Upload Setting. I rebooted the router from WebUI and then router got stuck in...

Hi everyone I often read the SNB forums for a bit of advice here and there but this is my first post... First a small bit of background to aid with the question. I live in the UK and my internet is provided by BT Fibre (FTTC). I use an openreach DSL modem which is then linked via Ethernet to...

I recently bought 2 AC88U routers - and I already regret it. Yes, the higher speeds are really nice but the firmware is just one huge mess. What I'm trying to achieve seems easy enough: I have one router serving the internet (192.168.0.1), and one router configured as media bridge...

Hi guys, im new here and also quite new to flashing routers with open source software. I wanted to ask (quite broad on the features page) is it possible to set up QoS throttling bandwidth on a guest account SSID, whilst leaving the main primary SSID... well to be unrestricted. I know this would...

Hi! Apologies in advance from a newcomer who was not successful with the search function. I noted my RT-AC88U is pulling 30 W on normal usage. It is clear to me that it has to pull power, but 30 W strike me as a bit too much, so I started wondering about ways to cut down power consumption...

Is it possible to setup Link Aggregation on more than the first 2 LAN ports of the Asus RT-AC88U? It appears that its possible to setup Link Aggregation on Port 1/2 on both the stock firmware and the Asus Merlin Firmware but what about the following scenarios (Scenario 1 is preferable)...

Hello everybody, this is my first post here, so please be gentle! I'm having issues with accessing my RT-AC88U web interface remotely via a PPTP tunnel. Basically, my setup is as follows: -Asus RT-AC88U as my intenet facing router. (LAN subnet 172.16.0.0) -Linksys LRT214 as a dedicated VPN...

Hello All, I apologize, as I am new at this, but I didn't know really where to post this after searching some of the threads. I have the Asus ac88u router with the latest Asus firmware installed, but for some reason at random points in the day, my devices stay connected to the wifi network...

I recently decided to go full-retard and on a recent trip to the US I bought a GT-5300, an RT-5300 and an RT-AC88U. My idea is to set up an AiMesh network with the GT5300 as primary, the RT5300 as a wireless node and the AC88U as a wired node. I didn't have any issue setting up the GT5300...

Can anyone with aimesh setup already help me out? I'm looking for a second router to setup mesh. Does it mesh just 2.4 or 5ghz or does it mesh both? Does a ac1900 works with ac88u smart connect feature?

Hello, My apologies, I am a long time follower of this forum, but first time poster and I need some (noob) help. I previously had an Asus RT-AC87U and had no issues for a long time. Shortly after redoing my kitchen, my WiFI started to act up as in dropping the connection, range became bad so I...

use ac88u（380.3941） 3.0.0.4.384.10007 Worth upgrading? 380.3941 The only one will not appear 5g disappear problem. But this error often occurs（ WAN Connection: DNS probe failed (0/2)）

Hi guys! I've noticed a strange entry at the log of my RT-AC88U - Merlin's latest stable firmware, 382.1. It is a message related to an app, but I don't imagine what it could be. May someone help me? Thanks in advance! Nov 17 21:51:14 kernel: ERR[set_app_info_qos_meta:3335] Failed to find app...