yazfi

Hey guys I hope this is the right sub-forum to post this. I have a RT-AC86U with latest merlin and I just SSH'd into my router and ran the command to install YazFi. I'm quite new to routers and things like this and I was under the impression I could run guest networks through my normal ISP...

Hello, I have encountered guest Wi-Fi connection issues when trying to use YazFi in combination with custom scripts for VLAN creation on RT-AC86U: the Wi-Fi devices (phone and laptop) connect for a short time (8 seconds max) to the guest network and are disconnected; they appear for a short...

Hi, I'm not sure if this is the right place to post this question. I have a RT-AC66U with 374.43_53D7j9527 (Merlin LTS fork) installed, firmware (3.0.0.4.374.43_53D7j9527) is the latest from August 2022. I added YazFi script, and now I'm migrating my subnets from 192.168.1.0/24 to 10.x.x.x/24 I...

Hello to everyone, long-time lurker, first time poster - please be gentle! I tried to find the answer for my question for days before posting, but to no avail, so here goes: I have a Synology NAS with a cloud-based D-Link camera for which I made a guest network with no Internet access...

Hi, so this came up in my other thread, but I wanted to start a new one since it's a separate issue and I like separation of concerns :) . I want to make it so that, for one of my guest networks, the 2.4GHz segment (.14 subnet) can talk to the 5GHz segment (.15 subnet) and vice-versa, without...

Hi, first time poster here. First, thank you to the creators of Merlin and YazFi - they work great for my needs. I have an RT-AX86U running Merlin 386.5_2 with YazFi 4.4.2, and I have 3 guest network SSIDs set up with YazFi, using 5 subnets (YazFi.conf attached). First there's spider_guest - for...

I have enabled Guest Wi-Fi with YazFi for VPN connection (managed my VPNMGR). But at the same time I am using Diversion to block Ads. Diversion works perfectly on normal LAN/WiFi but seems not working with Guest WiFi. What I have tried: 1. deactivate use force DNS, per...

Hi Community, Im hoping someone can help me solve what I would imagine is a simple problem. Im open to all ideas. I have three Asus Routers running 385 firmware. 1 RT-AC88U and 2 RT-AC68U'w. They are running AiMesh, with ethernet backhaul. All is working fine. SSID1 : Internet over WAN...

This is probably a simple question, but … how do you access the YazFi diagnostic file? I see where to create one, and the pass phrase it provides, … but I can’t for the life of me figure out how to open/access it. (Annnnndddd……… I want to access it because any time I set “client isolation”...

I have a somewhat odd network configuration that I'm hoping the wizards here can help me get working as I need. Here are my requirements: I need to be able to remotely (within my house) enable & disable the wifi network. I want this to happen without exposing my router to the internet via...

I am using YazFi to assign guests to a unique IP address range (192.168.20.x) so guests can be routed to my WAN connection directly, bypassing my VPN. This appears to be working as expected, but I notice a potential issue when testing. I wonder if this is simply a consequence of how I'm...

I don't see an Issues section on the YazFi GitHub, so I'm reporting this here. This is obviously a trivial issue as help is available at https://github.com/jackyaz/YazFi /tmp/home/root# /jffs/scripts/YazFi help Command not recognised. For a list of available commands run: help Lol. OK...

I am thankful this forum told me about YazFi. It's a very useful add-on! I just started using it yesterday. It was working as expected after I followed the install instructions. I had the GUI tab under Guest Network too. My main goal is that all guests have IP addresses on 192.168.20.X so my...

I have RT-AC56U router with john fork (374.43_49E4) and I have guest network enabled. I also have the YazFi add-on. I want the LAN device to see the devices on the Guest Network, and I do not want the devices on the Guest Network to see the LAN. I try to set it up in the YazFi add-on, but it...

I am using an Asus RT-AC68U running 386.3_2. I want to announce two SSID's. One with and the other without the VPN tunnel. Let's say SSID1 is 'NoVPN' and it is bound to eth1 and eth2 (2.4 and 5 GHz), and SSID2 is 'VPN' and it is bound to wl0.1 and wl1.1. I would like to separate Port 4 (1)...

Just installed YazFi 4.3.4 on my AC66U running john's fork 51E3 (the latest). I notice that on guest networks managed by YazFi im having severe DNS timeout problems. Devices connected to a guest network managed by YazFi keep having to try over and over again in the hope of resolving, whereas if...

Hi, I recently started using yazfi to route / link a guest network with vpnclient. this works great. :-) The only thing that strikes me now is that my existing Openvpn server is no longer working properly. If I make a VPN connection on my phone / PC, with vpn server, this works fine. but when...

Even after full resets, firmware upgrades, etc... I'm still having the same issue with yazfi. It's simple - when setting an open network (without password), all the yazfi settings don't apply. For example, if I set a different subnet, or a different dns, when connecting to a guest network it'll...

I have issues, YazFI and Dual WAN. Version: v4.1.4 Issue: When primary WAN is down and all traffic is routed through secondary WAN, guests can't access router as DNS server.

@Jack Yaz I'm reviving this question from the original YazFi thread from awhile ago regarding my Brother printer no longer being able to print via AirPrint/Bonjour after installing YazFi—Macbook connects to it fine, but gets stuck trying to print with "Printer is in use". Back then, I had shared...