Advanced search results
Better search
Select: Thread titles
Keywords: aimesh
Posted by:
Search forums: Selected
Results count: 458
Select: Thread titles
Keywords: aimesh
Posted by:
Search forums: Selected
Results count: 458
-
Q- 62 Posts - QwinnHi everyone. So about a week ago I replaced an old netgear extender with a RP AX58 to serve as a node for my AXE16000 router running Merlin 3006.102.4. Finally I had an AIMesh! This was a definite upgrade in several ways such as allowing me to bind several devices to the extender, since...
-
C- 9 Posts - chAThe following is my AIMesh setup: BE96U primary router 2x BE7200U (BE88U) satellite nodes – 1st node is using 10GbE backhaul; 2nd node is using wireless 5GHz backhaul Due to different backhaul configurations, I am unable to choose the universal "Ethernet Backhaul Mode" in the AIMesh System...
-
M- 2 Posts - Mike SI have the following network: RT-AC88U Main Router with Merlin 386.7 RT-AC68P AIMesh Node with Merlin 386.7 RT-AC68R AIMesh Node with Merlin 386.7 RT-AC68U AIMesh Node with Merlin 386.7_2 The main router has regular wifi SSIDs configured which work properly thruout the network. In...
-
B- 20 Posts - bibikalkaI am running a 2 router AiMesh, AC86U and AC68U, both on Merlin 386.14_2. (added later) The backbone is the 5Ghz band, and there is no wired connection between the devices. Pretty randomly AC68U node disconnects, and then reconnects. I reboot AC68U daily, so it's fresh. I tried another AC68U...
-
J- 177 Posts - jksmurfA recent thread (a very interesting one) started me off thinking about how under-utilized nodes appear to be, for 3006 FW based nodes in particular. I am reasonably sure I know what the answer is, but bear with me while I muse and ramble and throw my toys out of the pram. I’m starting to look...
-
Z- 10 Posts - zajecHi everyone I have a big problem with my Mesh network at home, My connection is symmetrical fiber download/upload 1GB/s - 1Gbps. Unfortunately the provider gave his router which he doesn't want to switch to bridge mode so I disabled WiFi in it and used Asus RT-AX88U as my main router (I paired...
-
E- 3 Posts - ElmerIt's probably covered somewhere, but I didn't see it. Is there a way to schedule AImesh nodes for autoreboot? Maybe this should be posted over in the AMTM forum?
-
B- 5 Posts - Bill Sreally excited that rmerlin has made available 3006 firmware for the RT-AX88U Pro. Question about Aimesh, do nodes need to be running 3006 firmware to be able to use VLANs? Assuming so, does it matter if its asus stock or asusmerlin firmware? Asking be sure I purchase a compatible device to...
-
M- 8 Posts - MarkusIHi, I know that AC86U and AC68U are now EOL, but I wanted to report the issue anyway, just in case it might also affect other devices. Friends of mine have an AIMesh setup, which I maintain. The setup is: AC86U (main) 3 AC86U nodes (2 of them connected via cable to each other, connection to...
-
A- 7 Posts - apvmI wanted to use a RT-AX58U as a Aimesh node, its firmware is 384, I tried to upgrade its firmware to 388 with Asus firmware, it can't. At the end I used Merlin firmware to upgrade and it suceed. Wondering why? Thanks.
-
H- 6 Posts - HouseMusicRulesHi, Just finished factory resetting and then setup my AiMesh system (4 total - XT8 router and 3 XT8 nodes). I do have certain devices manually pinned to various Nodes depending on their distance from them (in order to maintain strong signals to all devices on my network). Plus I have gone...
-
E- 2 Posts - ElmerSo, every blue moon I pull out a wifi radar type app and look at the neighborhood and how my wifi signals are interacting, as in, being interfered with. Well, somewhere along the line, the router decided to go to auto channel selection which I really don't like. So, I dutifully found the space...
-
W- 10 Posts - welimDear Expert, My Aimesh AP Ax88U is connected to a router. Let’s call the router “A”. My another Asus unit AX86U cannot connect to Aimesh AP via wireless to form the node. The wifi beam seems weak. However, it can connect to the router”A”. Can this be used to form the Aimesh network using...
-
C- 4 Posts - clvk07updated the BE88U to the latest merlin 3006.102.3 from 3006.102.2 and having issues with the only AIMESH node AX86UPRO on stock 3.0.0.6_102_34336. Initially it wouldnt find the node, and now shows weak signal backhaul connection. Is there any known issue or fix to this?
-
S- 2 Posts - sino4006114Hi Guys, So I now have a problem, my RT-BE88U is doing AiMesh with another RT-BE88U which works fine, but I have a quite long distance having an RT-AX56U doing an AiMesh node there, my iPhone can find the 5Ghz signal from BE88U at that place. But with no idea why the RT-AX56U can only connect...
-
- 20 Posts - garycnewASUS RT-AC66U_B1 All AiMesh Nodes Stopped Working. Link + Data Lights on Router Ethernet Ports Still Function. WAN (eth0), Wi-Fi (br0), and VPN (tun12) Still Working. LAN Ethernet & Wi-Fi use the same interface br0. DHCP seems to work with Wi-Fi. DHCP Range 192.168.0.193 - 192.168.0.253... -
B- 6 Posts - BradyHappy New Year and Thanks all, for taking the time to read/consider my request for advice! I have 2 RT-AC5300 routers and 1 RT-AX58U all running Aimesh. I'm considering going to Merlin and from my research, it appears the best approach is to flash Merlin on the main router, leaving the nodes...
-
- 11 Posts - matthew_eliHi, I've a RT-BE86U and with both 102.2 and 102.3 alpha 2, if I set an IoT network only on 2,4GHz channel, shared on all AiMesh nodes and a 5 GHz Guest network, this one cannot be shared on AiMesh nodes because I run out of the free slots on them. It's strange because only IoT netwotk (2,4GHz)...
-
M- 6 Posts - MilanHi, Is there a possibility to connect to AI Mesh node GUI to change other settings as are available from the mesh page on the main router? Or is there a way to change the USB Mode from the command line?
-
W- 26 Posts - welimDear Sir/Mdm, Recently I've updated the latest firmware 388.8.4 from 388.8.2. After the upgrade, I frequently find AX86U_PRO being the main AIMESH router keep disconnecting with my AIMESH node AX11000. AX86U_PRO is not a triband. AX11000 is a triband. It has no issue with the connection until...
-
A- 3 Posts - ah1750Hey all, wondering if anyone has some interesting ideas for this issue. I've got an RT-AX86U paired with an aimesh node RT-AX57. The system is remote and I don't have physical access right now. The 57 lost connection to the 86 and I can't get it to re-pair. The 86 is running 3004.388.7 and I...
-
E- 1 Posts - emwgeeI was trying to create an AiMesh network by adding a GT-AX11000 to GT-BE98 PRO without success for many times, kept getting the following errors. The GT-AX11000 is on latest Merlin firmware Asuswrt-Merlin 3004.388.8_4 The GT-BE98 PRO is also on the latest firmware Asuswrt-Merlin 3006.102.2_2...
-
I- 12 Posts - IlluvattarrI want to add an ASUS DSL-68U with Merlin firmware as node to my existing aimesh network with 2 other asus devices (RT-AX82U), but cant get it to find any nodes. The DSL-68U is factory reset on merlin firmware. I only set it up so that the first ethernet port is now a WAN port in order to add...
-
- 1 Posts - aruMy router network environment is as follows: I followed the plugin script provided by the script owner for practice and successfully sent the node's CPU temperature, load, and uptime to the main router. I also categorized the logs for cleaner and clearer display...
-
E- 3 Posts - elorimerI have a windows 11 PC with a wired connection to an AIMesh node (AC68). The main router is an AX86Pro. I have a windows 11 laptop and a Chromebook. Both have no issues making an RDP connection to the Windows 11PC when they are within a foot or so of the node (and so, I am assuming, connected...
-
V- 17 Posts - vibroverbusAiMesh network AX68U with AC66U-B1 node. Merlin 388.8.2 on the host, Asus latest on the node. I have been binding fixed location devices that would sometimes randomly 'roam' then seem to be stuck on the weaker signal (as reported by others), as well as an odd client or two that seem to...
-
S- 5 Posts - Striker317I have a GT-AX11000 with three GT-AX11000 nodes. When i am at the network map page (index.asp), under AiMesh, I see my three AiMesh nodes. Is there a reason the last two GT-AX11000 nodes don't have the icon? I see this in the system log Oct 30 17:21:48 lld2d[1826]: get_icon_image: reading...
-
B- 3 Posts - bibikalkaI have a fairly feeble AiMesh setup, AC86u as the main router, and AC68u as an AiMesh node. My main router is rebooted daily, but the node was just sitting there for weeks of uptime. Anyway, it would become somewhat flaky after a while - so then why not just reboot the AiMesh node nightly too...
-
D- 42 Posts - Deleted member 66500Hello, Long-time Merlin user considering a home-network upgrade with a RT-BE88U - given that Merlin is just beginning to release firmware betas for it. I would like to get some consensus on whether my thinking is correct about getting real-world improvements with a new RT-BE88U - before I...
-
J- 15 Posts - jaredpa29Hello Everyone! I'm trying to get Merlin working with my setup that uses a wifi AiMesh and I'm running into a issue with connecting to the nodes. My setup: Router: RT-AX88U PRO, firmware stock 3.0.0.6.102_33320-g3899443_345-gf3514 Nodes: ZenWiFi AX6600 (XT8), firmware stock...
-
C- 4 Posts - Chris313AllNightI have AT&T Fiber BGW320-505 Gateway, IP Passthrough to a AXE16000. I'm planning to bring an AC86U back to life as an AIMesh node. The last update for it was around Xmas of 20, where I replaced it with a AX86U. How do I hook up the router to my setup to be able to update the Merlin FW on it to...
-
N- 5 Posts - nortuzarHi all, I have two AX58U, working on Aimesh and connected by wire: Main router: Last Merlin V. 3004.388.8_2 AP: Last stock V. 3.0.0.4.388_24762 All was working well until a few days that not a single device will connect to the AP on 5ghz (2,4ghz its fine). Phones can see the signal but they...
-
S- 2 Posts - sorachanHi, I'm using the AX86U dual-band router as the main mesh router and the older XT8 tri-band as a mesh node. As you may already know, the XT8's 5GHz-1 band does not support 160MHz. In my setup, I selected Ethernet Backhaul Mode so in theory both 5Ghz-1 and 5Ghz-2 should be available to use...
-
P- 6 Posts - proskater_101As title reads, I'm having a problem with part of my network and have isolated the problem down a bit. I just need someone to look at my log file and help me understand what some of it means. Question one: I have 2 repeating lines of "httpd_login_lock: Detect abnormal logins at 5 times...
-
K- 9 Posts - keyboard99I am about to move location which we have fully wired each room with CAT6 back to the server rack. My current system is as follows but I want to separate the LANs for the CCTV, TV's and the home LAN v Business LAN. Current Set up 3x 86U in a wired backhaul Mesh Synology NAS running both home...
-
W- 3 Posts - whosucksThe title is weird but I've been trying to nail down this problem for a few weeks and was wondering if anyone else has had a similar problem. BACKGROUND: I have an AX86pro as the main router and an AC68U as an aimesh node. When my main PC connected to the router loses connection to the...
-
J- 20 Posts - jksmurfA while back I got some very good advice from @drinkingbird and @RMerlin regarding how Asus or Asus-merlin source the device name under the system log-wireless log tab. In summary: and So I pretty much removed all the Static IP settings from my devices and let the DHCP Reservations name them...
-
T- 5 Posts - theracI have AC68U running 186.13 firmware, ethernet cable link to an AC67U running latest stock Asuswrt firmware (AC1900) connected as AImesh node. This in turn links over wifi to a further AC67U some distance away, also connected through the first AC67U as an AImesh node. The system log on the main...
-
C- 8 Posts - clvk07Hi Using AX86U and TUX3000 V2 as mesh. FW version 388.7. Seems that when I move upstairs the devices still stay connected to the node downstairs with low signal (1bar) if I disconnect wifi and connect again it connects to the node upstairs. Tried to change some settings but no joy. What is...
-
F- 5 Posts - fulvion75Hello everybody, just signed up but following this forum since a long time now. I'm opening this thread to see if i can get some help finalizing my new home network setup. I introduced a pfSense firewall leveraging the RT-AC86U from routing and firewalling tasks and letting the pfSense take care...
-
C- 9 Posts - cabs14Hi! just upgraded the firmware of my ax88u, ac88u and ac5300 to the latest asusmerlin firmware, Using my main router ax88u i cant add the ac88u and ac5300 as aimesh nodes. Here's the error message from the mobile app. Any advice? Thanks
-
K- 5 Posts - KanukiHi... guys.. I just managed to update my GT-BE98 firmware to GNUton's asuswrt-merlin 3006.102.1 Beta 1 and also updated my RT-AX88U to asuswrt-merlin 3004.388.8 Beta 1 as AiMesh node. I managed to add Realtek 2.5Gbps USB dongle at eth8 and bridged it to br0. but it only has 2 options to...
-
R- 22 Posts - Roy360360I currently have an AC66U-B1 and a AC68P. Both are running the exact same merlin firmware RT-AC68U_386.13_0. Both are set to "Access Point(AP) mode / AiMesh Router in AP mode", both routers are wired directly to my pfsense router, and both routers have scripts enabled so I can use VLANs. I set...
-
D- 6 Posts - DJonesDoing a audit of my network devices, and noticed AImesh nodes use UPnP despite UPnP disabled on the main router. Now UPnP shouldn't be a security concern because it's a node on LAN before the WAN, and doesn't actually expose ports to the internet, and quite likey is used to auto configure the...
-
J- 7 Posts - js28194Hello, I am adding a second AX58U as second Node to AiMesh. It added as a second node just fine, however, it will not update to the latest Merlin. The progress bar does keep moving forward to 100% and says it is complete, but it also states that it failed in the same dialouge box. You can see...
-
V- 18 Posts - vshindgiHello Guys, i just now ordered a ax86u pro as a replacement for my ac86u 2 pack meshing devices which i currently have. Wanted an advice to create a better network, my home is old and walls are very tough for penetration. As of now my main fiber syrotech router (ISP provided) is connected to...
-
V- 5 Posts - vibroverbusThis is just an FYI thread because I dont' see this anywhere and I think it might be helpful for searches. TL;DR - When you add a new node now, AImesh now seems to push the current scheduled reboot settings from the primary to the nodes, creating in fact a "System Reboot" on the exact same...
-
P- 20 Posts - pjd50Hi there. I've used Merlin on all my ASUS router for what I think is at least a decade - this question may not be specific to Merlin, but since I use Merlin for everything I figured it's good to have that background as a "constant." Currently have two RT-AC68Us in my property on a wired...
-
G- 6 Posts - GrefyneI have a ASUS RT-AC66U B1 wifi router running Asuswrt-Merlin 386.12_6. I have about 50 devices on my wifi network. Most of these devices are 2.4Ghz smart devices. (light bulbs, plugs, switches, etc.) I have a problem where some of these devices almost take turns dropping off and reconnecting...
-
R- 8 Posts - romol1Have AiMesh with RT-AX86U Pro (router) and RT-AC66U B1 (node) connected via wireless backhaul, both on the latest Merlin firmware (can't use wire for router-node connection). Node has one Ethernet client with static IP (my work pc). I need to be able to access it from my other devices, mostly...
-
A- 32 Posts - akbIt has always bugged me how the Aimesh nodes had to keep the same channels as the main router. I been playing with it for a while and I have concluded that the nvram methods posted all over the forum are useless. The way that Aimesh nodes work is whenever they are in this mode and the wireless...
-
G- 13 Posts - Gravityzi currently have thr RT-AX88U as main router with RT-AC86U as aimesh node(5Ghz backhaul) it works but is not perfect(disconnects sometimes) what would be the best/most stable choice if i replace the RT-AC86U RT-AX88U same model with AX speed RT-AX86U different model with AX speed RT-AX86U pro...
-
C- 4 Posts - corbendallashi forumers i decided recently to change my AC88U router running on Merlin during years. i also used an RP-AX56 extender with it. i changed last week to an AX88-PRO, stayed on Stock firmware to test it, with no problem to link the extender. i just think it was upgraded to a latest firmware at...
-
T- 24 Posts - thecatmanHi everyone! I have the latest merlin firmware loaded 3004.388.6 on rog gt-ax6000 and I would like to add as aimesh node the rt-ac68u, always updated with the latest merlin 386.12_4, but it won't let me do it. Practically, on the ax6000, I follow the procedure for adding the aimesh node, it...
-
G- 16 Posts - Gravityzi have this problem for a long time now, both with official and merlin firmware setup RT-AX88U router RT-AC86U AImesh node all latest merlin smartconnect on 1 single SSID for both 2.4 and 5ghz system can work for days stable without disconnects then all of a sudden(after 3 days) when coming...
-
B- 1 Posts - bhsizemoAnybody experiencing these weird data points running Merlin 3004.388.5 (RT-AX86S)? DDNS has the error icon but connectivity is fine. AiMesh PHY speeds show 0, but AiMesh is working fine with plenty of devices connecting to both bands with data.
-
- 1 Posts - ToasterPCHey there! I've been up all night banging my head against this problem. I'm trying to get both a GT-AX11000 and a RT-AX86U (both running Merlin version 3004.388.5_0) to work using a 2.5GbE backhaul for AiMesh in AP mode with separate VLANs for each of the Guest Networks, but so far, the GT has...
-
- 9 Posts - SmokindogI've tried AiMesh a few times over the years and it's never been worth it to ME for the problems it brought versus me manually managing my nodes. I'm looking at a possible "redo" of much of my network to support more IOT and am open to giving it another trial. It's a lot of work to go back and... -
P- 6 Posts - primaldadHi All, I currently have two DSL-AC68u both running the Merlin 386.9-GNUTON1 firmware. One is configured as the router and the other as the node. To address the occasional drop out of the eufy security cameras connected to the node, I have run an ethernet cable from the router to the node, only...
-
U- 5 Posts - UbimoHello My smartphones do not transit to a better AiMeshnode when I move around. I see this in syslog: Dec 7 15:01:15 bsd: bsd: Sending act Frame to 8c:f5:xx:xx:xx:xx with transition target eth6 ssid 24:4b:xx:xx:xx:xx Dec 7 15:01:16 bsd: bsd: STA:8c:f5:xx:xx:xx:xx no response Dec 7 15:01:16...
-
- 7 Posts - Skeptical.meI'm just about to get a 1Gbps FTTP connection to my home, because of the NTD placement I can't run ethernet to my room at the back of the house. So I'll have to use my RT-AX88U out front next to the NTD, and the RT-AX3000 (then ethernet to my PCs) in my room in AiMesh mode. I understand this... -
- 16 Posts - Preskitt.manI have rt-ax86u as my primary router. Was trying to setup an rt-ac86u as an aimesh node. Primary has Merlin 300.388.4 installed and the node has Merlin 386.12 installed. I factory reset the ac86u and powered it on - placing it within 8 feet of ax86u. There were no cables (other than power)... -
C- 5 Posts - candrews99Hi there, I have an RT-AC86U (main router) and RT-AX56U (node), both running Merlin WRT. I have set up a reboot scheduler via AMTM, but I am wondering if I can do the same on the node to reboot at the same time? If this is possible, how do I access the node via SSH, or is there another way...
-
M- 7 Posts - MarcoPoloHello, To avoid interference, I disabled USB 3.0 (I'm on USB 2.0) on my main router (AX88U), but how can I do the same on my AC68U router, which is an AiMesh child of the AX88U, please ? Thanks in advance
-
B- 24 Posts - BeachGuyNode does not reconnect to AiMesh after reboot. No matter if I reboot it through AiMesh (Management: Reboot) or manually. It does reconnect through AiMesh: System Settings: System Reboot. Any help would be appreciated. Running Merlin 3004.388.4_0.
-
B- 6 Posts - BeachGuyIs there a script to reboot the AiMesh system? I see reboot router (and scheduler) but that only reboots the main router on an AiMesh system. I saw this thread https://www.snbforums.com/threads/aimesh-system-reboot-via-ssh.84373/ but it doesn't answer my question. I would like to schedule a...
-
M- 12 Posts - Mike SI have an RT-AC68P router as my main router running Merlin 386.7_2. I have a second router (RT-AC66_B1) also running Merlin 386.7_2. I am trying to add the RT-AC66 as an aiMesh node to the main router. I have configured this router as an aiMesh Node. When I try to add the node to the main...
-
H- 4 Posts - hard1kHello everyone! After buying a new Wi-Fi 6 enabled cellphone, I discovered that it won't connect to the primary Wi-Fi 6 5GHz network (AX86U running on Merlin 3004.388.4 firmware) due to it using Channel 153. When I tried to manually set a different channel, there was just a blank menu with no...
-
- 3 Posts - Robert TickleI currently have an AiMesh system using two RT-AX86U routers with a wired 2.5g backhaul. I purchased a 3rd RT-AX86U to connect as an additional node, but this node would be a Wireless connection. All routers were loaded with Asus-Merlin 3004.388.4. All routers were reset using both the... -
C- 3 Posts - cqcqkrchsI couldn't find the option to add a NFS share on AiMesh node (I found the option on the main router). The node router is a RT-AX88U. Is there a restriction on AiMesh or can we open a feature request for it? On the other hand wondering if there is a way to set SMB v3, I only found v1/v2 or...
-
A- 4 Posts - axdaws007Hi, I'm trying to setup an AIMesh using a RT-AC88U as the main router and a RT_AC86U as the AIMesh node. Both routers are currently running the firmware v386.10. The AIMesh has been configured (i.e. the AC86U has been setup succesfully as the AIMesh node). However, within a few mins the main...
-
P- 8 Posts - phipeHi, I'm banging my head on a problem here, I hope you can help me solve. I have an AiMesh setup with two AX92U routers (one master, one slave) with a wireless backbone (unfortunately not able to cable them). It's now running Merlin (Gnuton, build 388.2.2), but I've used the official AsusWRT...
-
R- 7 Posts - Rares OlteanLike the title says, I'm trying to setup an Asus AiMesh with my RT-AC86U being the master but when I access the Topology tab I get an empty page. First time I tried with the latest Merlin FW 386.11. Then I tried, 386.10, 386.7_2, 386.5_2... same thing. I tried reset to factory settings with all...
-
- 6 Posts - iJorgenWhen using the command "service restart_wireless" it only seems to affects devices connected to the main router. Is there a similar command to restart all wireless devices in the network including the ones connected to AiMesh-nodes? -
- 2 Posts - henkihRequest: Can you build web based configuration controls of the ethernet switch in an ASUS router (Asuswrt) EVEN when this router is in AiMesh AP mode? -
C- 5 Posts - chchiaCurrently i have 2 devices 1. AX58U with Asuswrt Merlin 388.2_2 2. AX53U with Stock Firmware 3.0.0.4.386_68691-gda689be (latest stock firmware) i can AiMesh both devices with Ethernet. However on the AiMesh node devise status page, backhaul and fronthaul information are all showing 0kbps. i...
-
L- 5 Posts - LimeWould anyone know if if Asus Merlin AiMesh works with GT-AX11000 and RT-AX92U? If so has anyone had any issues or drops with performance compared to stock firmware? If you could point me to some documentation that would be awesome too. Thanks!
-
S- 3 Posts - -Skyrider-I hope I put this in the proper section. Few months ago I've assigned a few of my devices to use the aimesh router (for wifi) instead of my default one. Now I factory reset/installed a different firmware (Tomato) on the AIMesh router, and for some reason I can no longer assign my tapo camera to...
-
H- 3 Posts - Helder SantosI have a ax88u hw version 1.0 has main router And a ax88u hw version 1.1 running in aimesh Can I keep them like that or should I switch the v1.1hw to main and the v1.0hw to aimesh? Just feeling that having the latest hw has main will be better for long term. I just switch my aimesh from...
-
B- 8 Posts - BGoodSo I had been running Merlin 386.7_2 on both my AX11000 router and AC5300 node for a few months now. It mostly worked, and I had 2-4 devices that would be serviced by the AImesh node typically. Yesterday, I upgraded the AX11000 to 388.2_2 (dirty upgrade). Everything seemed normal, but I...
-
- 8 Posts - maghuroI've an idea. I'd love to receive my aimesh node (rt-ac86u) logs on my main router. And using scribe, put them in a separate window. Is that possible? I know there's some kind of server/slave log thingy but I don't know where to start. --- Also, my qnap has the same log server thing. I'd be... -
M- 20 Posts - MagisterI have a RT-AX86U and a RP-AX56 as a mesh (wifi backhaul). It works like this for a year. It looks like that since I flashed 388.2_2 that I have problem with the mesh. At startup, LED on the mesh is solid white, I can ping it, it has an IP address, it is in the DHCP leases and Wireless log with...
-
- 9 Posts - ChrisAIs there going to be a problem using a new WiFi 6e main router with an older WiFi 5 router using AiMesh with a wired backhaul? I only have a few modern clients. Most are 2.5 Ghz lightbulbs, switches, door sensors, and the like that need rock-solid connections but have low bandwidth. These IOT...
-
- 12 Posts - technetOn a 2 RT-AX88U AiMesh setup, 2.4 Ghz clients are binded to the closest AP and after some time they still connect to the main, distant AP. Network is a Guest Network set to be on all AiMesh Nodes. At the AiMesh Topology, we see clients with an attention mark reporting "This device is currently... -
- 2 Posts - talha_rafiqHi, can we achive AiMesh technology on assus ac3200 in anyway ? by default AiMesh is not available in ac3200.
-
J- 4 Posts - JoshuajacksonHi I have this weird bug, I turned off WPS because I find it insecure and it’s off for most the network however one is not and the MAC address seems to point to the nodes, how am I able to completely turn it off it’s weird how it’s only one network (green means WPS is active)
-
M- 2 Posts - mostuselessDear all. I solved one additional AiMesh Node connect to AiMesh Router last night. I wish it helps your experience to connect. * How i solved : turn off 'jffs' on 'AiMesh Router' -> Connect AiMesh Node -> turn on 'jffs' again. * Present Devices : GT-AX11000(AiMesh Router), XT8, RT-AX88U &...
-
B- 4 Posts - baseball is funI have 2 t mobile ac1900 that I have flashed to Merlin- they are running 384.10_2 Rt68u I recently added a TV in the back of the house and the WiFi connection there is spotty. I thought this would be a perfect time to use aimesh. However I don't see it in the firmware. I flashed these...
-
- 18 Posts - henkihI have an issue. I want to use a RT-AX86U (Pro) as an AiMesh AP (a RT-AX88U router is master of my AiMesh network), but the uplink of my RT-AX86U must be a link aggregated connection (connected to the link aggregated LAN-1 and LAN-2 ports of the RT-AX88U). When making the RT-AX86U an (AiMesh)...
-
Q- 8 Posts - qhealyHi, I'm wondering if it's possible to disable the radio on the router (RT-AC68U) while leaving the wifi on my two AI Mesh satellites enabled. I'm using a cat5e backhaul to connect the router to the satellites. I find due to the restriction i have with router/modem placement in the house...
-
L- 3 Posts - lumiaHello i would like to make a guest wifi network with the following properties: 1. speed 1Mbps up/down 2. Access to 2 refferred websites only 3. When users try to visit other webpages show them a website (a simple .html that i've build) notifying them that they only have access to 2 websites 4...
-
A- 7 Posts - akbI wanted to share if anyone who has been using AImesh and enabled guest network 1 slot and set it to be enabled in their guest nodes might have network issues. I have been basically having this issue for 2 years where random clients sometimes just wont be able to be pinged. I just assumed that...
-
M- 2 Posts - MrSweetE90Hi All, So I oddly enough I managed to get another Asus AC88U which I though would be great to increase the speeds upstairs. I upgraded both routers to merlin 386.10 and factory reset the upstairs Ac88u. Unfortunately there where issues uploading the Aimesh settings from the main router to the...
-
- 6 Posts - MastiffI have two AC86U set up as an AI Mesh, with ethernet backhaul. But I would like to add another router, an AC68U. The mesh router sees it, but it fails to add it every time. I assume that's because it's set up with ethernet backhaul checked. But if I go from ethernet to wireless backhaul, will... -
L- 8 Posts - LexLuthorI have an Asus RT-AX86U as my main router and an ASUS RT-AC68U as my mesh node. Both running latest Merlin. I'm connected via Ethernet and have Ethernet backhaul mode on. It looks like I max out at about 50M/50M when connected to the RT-AC68U. I get up to my full 300M/300M when connected to...
-
G- 22 Posts - GreenoHi. I bought a new RT-AX86U Pro router as a replacement for the RT-AC68U. To begin with, I updated the firmware in RT-AX86U Pro to the merlin firmware: 388.1_0 and configured everything. In RT-AC68U I also updated the merlin firmware: 386.10_0. Currently I would like to use the RT-AC68U as an...
-
M- 5 Posts - metahomeI have a pair of RT-AX68U both running 386.7_2 configured as an AIMesh with a Wireless backhaul. Backhaul connection is Good. I have 3 SSIDs configured: gnmnet, gnmguest, gnmdevs. The latter 2 are guest SSIDs. However looking at the network with InSSIDer it appears that the mesh node is only...
-
L- 12 Posts - ludespeednyI am trying to set up an aimesh router and running into issues. There must be something obvious I'm missing, but not sure. Equipment: Main Router: AC3100 fairly fresh (last month) 386_9 install Secondary Router: AC68U w/ fresh reset 386_9 I have tried to use the add node option from the main...
-
N- 4 Posts - nedrivI am trying to add a second AiMesh node to my home network and I have been FRUSTRATINGLY unsuccessful. My existing network setup has worked flawlessly for me, but I've added Ring cameras to the network and need a stronger signal for some cameras. See below for current network configuration. So...
-
I- 7 Posts - IgorTwo RT-AX68U (fw 388.1) routers are in AiMesh mode. The "Main_WStatus_Content.asp" menu (System Log->Wireless Log->Wireless 2.4 GHz) displays only those Wi-Fi devices that are connected to the master/main AiMesh router. How to find "Rx/Tx & RSSI" parameters for devices connected to a AiMesh Node?
