Advanced search results
Better search
Select: Thread titles
Keywords: wireguard
Posted by:
Search forums: All forums
Results count: 343
Select: Thread titles
Keywords: wireguard
Posted by:
Search forums: All forums
Results count: 343
-
M- 4 Posts - MrFahrenheitHi all, just wanted to get some confirmation / advice before I commit to something that ends up being an expensive mistake... I currently have a RT-AC5300 with latest Merlin. At the moment it's using Mullvad VPN, which on startup gets up to 50Mbps speeds, and that drops to 20Mbps within a...
-
- 1 Posts - B255ea006Hi, :cool: i am using an ASUS RT-AX88U VPN Router and the WireGuard VPN protocoll. I have a question regarding the priority of the VPN settings regarding a boot/ restart of the Router and a possible Kill-Switch like the OpenVPN settings provides. I am currently using a only a WireGuard... -
G- 4 Posts - glitterclubHello, I have created a VPN failover script for wireguard VPN client, currently the script works only for one client (wg1) where you can failover to multiple clients if a server goes down. This is my first attempt with shell scripting so don't mind if the script feels silly. Link...
-
- 11 Posts - lipangengThe device is ax86u and the original firmware is 3.0.0.4.388_21709.Using the WireGuard channel blocked https access and bothered me for two weeks. 1.TCP channels can be established, but HTTPS cannot be established. After Client hello is sent, no response is received. But the http protocol is...
-
G- 1 Posts - grottoguyHello- I have stumbled through making a mostly bidirectional wireguard VPN connection between two remote routers. 192.168.1.1 and 192.168.2.1 So across those, I can address most of what I want directly. I'd like to add local DNS entries in both locations to make things a little easier for me. I...
-
G- 31 Posts - GPSMapperHi All, I am having 2 x AX88U routers running Merlin FW, installed in 2 remote locations and I was using OVPN server+client on both sides with NAT to enable site to site connectivity for connected LAN devices and occasional routing of both segments to Internet via different ISPs connected to...
-
T- 12 Posts - TommyrepkaNow wireguard has been rolled out to several ASUS routers I was looking at a few options. I'm in a relatively small apartment and have a powerline to a blackspot area so I'm not too concerned with coverage. My ISP router is now becoming erratic and as I'd like to run wireguard on my router I...
-
- 4 Posts - matssaHey guys, Before the latest update, I was using WIreguard directly on my router using the amtm addon (server on my router and client on my phone in order to use the home Adguard stuff and DNS and access to my NAS and all). With the latest version, we can (if I understood correctly), directly...
-
F- 4 Posts - Funnyland123Hello Does VPNMON-R2 also work with Wireguard / Nordlynx from Nordvpn? I have all access data.
-
M- 3 Posts - mitsubishi_908Hi, I am trying to figure out how to get my wireguard on my RT-AX88U merlin firmware 388.1 setup so that I can access my NAS. I have attached a few pictures to show my current settings (no idea if they are correct though). I am running the wireguard app on my phone on LTE and trying to connect...
-
J- 7 Posts - junn0Hello everyone! I have a RT-AX88u and have the latest Merlin firmware. I am currently using dnscrypt and I use nextdns as my resolver. I am also using mullvad vpn tied to one of the interfaces under vpn director. To make this setup work I had to delete the dns server configuration in the...
-
- 7 Posts - Chewie420Just updated my RTAX88U to Merlin’s 388.1 I configured my wireguard for VPN client and everything is working great but in Yazfi I seem to only have the option to connect to my OpenVPN client connections. If I change the subnet I created in VPN director to 192.168.111.0/24 to use the WG client... -
M- 10 Posts - MarianoI am really happy about the wireguard server option! Unfortunately I can´t setup my android device to use it. problem: - no internet access after enabling VPN with the wireguard app - get a message that my manual chosen DNS server is not working for this - deactivating DNS Settings or setting...
-
F- 3 Posts - Funnyland123Hello, I have the router mentioned above. Can someone tell me how I can get all clients (the entire network) to run over wireguard? Without having to add every single IP in the VPN director. It's also possible with Open VPN. Thanks for a help.
-
S- 2 Posts - SvartCobraHi all I just saw that Merlin released 388.1 with the ability to use WireGuard. Here comes 2 issues Background : I am using OpenVPN for particular devices (Using VPN Director) with VyprVPN profiles to enable particular devices traffic to transmit in secured way. With the use of WireGuard, I...
-
- 3 Posts - TimmyLHi , Can anybody here can teach me how to use WireGuard with NordVPN, I had asked NordVPN for above and they advised me that NordVPN don't support WireGuard at this moment and only support OpenVPN now. -
M- 21 Posts - micer45I have a 900Mbps Fibre connection RT-AX88U with 3.0.0.4.388_20558 firmware I enabled WireGuard VPN but have noticed that it then limits my internet speed to 500Mbps on any client connecting from my local network to the internet. With Wireguard enabled With WireGuard disabled OpenVPN has...
-
- 6 Posts - octopusI testing to ping through interface "wgc1" turned on wireguard client 1 and tried to get ip number through curl. I probaly missed some imported settings/step(s) octopus@RT-AX86U-E1D8:/tmp/home/root# /usr/sbin/curl -s --interface wgc1 "https://myexternalip.com/raw" curl: (45) Couldn't bind to 'wgc1' -
D- 13 Posts - dominatorstangBecause I am behind a CGNAT then I am using a VPS to host services from my local server with a wireguard tunnel connecting them. I used mochman's script to setup the tunnel between a ubuntu VM I have on my local network and a ubuntu vm on my VPS. The local VM is actually just relaying traffic...
-
E- 7 Posts - editFirst time here, just got my router connected to a VPN for the first time, and my download speeds went from 110mpbs to around 60 with an OpenVPN config. I'm guessing I could get faster speeds through Wireguard but don't see an option in my stock up-to-date Asus firmware for it. Is there a...
-
D- 1 Posts - dominatorstangI am trying to restructure my network and looking for some advice/experience. Because of having a Tmobile gateway I use wireguard peer to peer for hosting outside my network through a VPS, most of that traffic is music and nextcloud service. LAN has around 30 devices on it, WLAN has around 60...
-
- 3 Posts - FlourHomeI may have a problem with the WireGuard client on my GT-AX11000_PRO running Merlin-WRT 388.1... When I try to connect to a service running on the VPN IP from my ISP IP on my local network the connection does not seem to work... For ex... When I try to connect to one of my Minecraft Servers... -
D- 2 Posts - DnskeHello, I'm looking to set up a Wireguard, Pi-Hole and DNSCrypt solution. I have a couple of questions. 1. Do I necessarily need Unbound? Or is DNSCrypt sufficient enough a Resolver. 2. Do I need the DNSCrypt client or server? 3. I see many users recommending the use of Unbound with Pi-Hole...
-
- 17 Posts - savage75Hi folks! Trying to set Wireguard VPN on ASUS ZenWiFi AX (XT8) so I can access my local network through it (as below) Peer1 (10.6.0.2) connects successfully to the wireguard server, also it can ping 10.6.0.1 (wgs1) and 192.168.0.2 (LAN) but can’t connect to other devices on (192.168.0.0/24)... -
K- 2 Posts - Kingp1nDumb question but would the following script below work with the upcoming 388 fw to use with Wireguard? Post in thread 'unbound_manager (Manager/Installer utility for unbound - Recursive DNS Server) - General questions / discussion thread 2'...
-
S- 2 Posts - Ser9eiHi, Is it possible to add new option - "Inbound Firewall" for the WireguardVPN Client settings as for the OpenVpn client? Right now, in the 388.1 betta, wireguard vpn client creates with "accept" option the "inbound/forward" iptable rule without possibility to change to "drop" (as for OpenVpn...
-
R- 32 Posts - RickGWSo I set up a WireGuard VPN server on my ASUS RT-AX86U (running firmware 3.0.0.4.388_20566), but when I turn on the server, the total WAN-LAN speed implodes from 940/940 Mbit to ~ 480/480 Mbit, even though there are no clients connected yet. What's up with that? I used the search, and...
-
J- 6 Posts - jonathan_wintersAfter my LTE provider made a change a week or so ago, I have been working my way through the various issues that their changes created for me. It now appears that I'm behind an extra layer of NAT/CG-NAT that is really throwing off some of my internal networking (which was all finely tuned prior...
-
M- 1 Posts - mrmasonCurrent Version : 3.0.0.4.388_20566-gd32e353 On my router, I turn on nat and access intranet in advanced settings and enable wireguard server. I add a client for phone. From phone, I toggle on the tunnel. I then navigate to a service runing on my LAN using the LAN local IP address. I enter...
-
I- 24 Posts - IgsHi folks. I have Asus ax5400ax TUF and it just got a new firmware with a Wireguard support. Prior to this I've been using OpenVPN. With OpenVPN I could easily acces files on USB attached HDD remotely. Same was with the InstantGuard. But I cannot access files with the Wireguard even though the...
-
G- 24 Posts - greenspannerHi, I've successfully moved all my OpenVPNs over to Wireguard and I am very impressed with the speed and the session manager script. After solving a few things myself, I have a couple of issues that I'm hoping are quite straightforward but beyond my skills. Firstly, with ovpn, on the router...
-
G- 21 Posts - grottoguyHello. I've attached a verbose problem / config / current state story for those who want to take the time. The short story is that WireGuard seems to be a great out of the box for site to site, and Asus has included some docs to explain it. I have it more than half way working in that I'm...
-
I- 2 Posts - in2ndoSo, just updated to my XT8 to 3.0.0.4.388.21099 and added a WireGuard ProtonVPN connection. Everything seems to be working fine. The only problem I’ve found, is that I can’t access the routers webpage? I get a server not found. I’m googling. But haven’t been able to find the answer. Anyone...
-
I- 2 Posts - in2ndoSo, my VPN knowledge goes as far as setting up a few openVPN connections on the XT8. Downloaded the proton config files to the router and done. With the new firmware 3.0.0.4.388.21099. I can’t find or don’t understand how to setup WireGuard. Has anyone setup their XT8’s using ProtonVPN’s...
-
N- 1 Posts - nb3106We use custom firmware from Voxel. How can I set the wireguard client listen port to a specific port?
-
- 17 Posts - sl4fkoThe title says it all... With Wireguard coming to ASUS routers in new 388 firmware, which VPN provider could be (is) the best choice (downloadable Wireguard configs, fastest services/servers...)? I am currently on NordVPN but it has no wireguard option, only its proprietary NordLynx service... -
- 25 Posts - cdjockeyHello, I am thinking of using wireguard as it appears to have a lot of benefits vs other methods, namely speed. I would like for all of the data from one device on my network (client via AC86U) to go via a tunnel to another location (AC86U acting as a server) in a different country and pop out... -
W- 1 Posts - wolfpackHi, I have just successfully set up two VPN tunnels on my AX-86U using the new in-UI wireguard interface. The Server tunnel lets me connect into my home LAN when I'm away from home. (192.168.1.0) The Client (VPN Fusion) tunnel connects to a wireguard endpoint I created at my parents' house so I...
-
D- 2 Posts - D76I’be got firmware 9.0.0.4.388_20477 installed on my router and having a couple of problems. When I try to connect to Wireguard (after downloading the relevant config files from my VPN provider) it shows that I’m connected but no webpages etc will load. Probably user error on my part. I’ve tried...
-
J- 13 Posts - JTnolaMy router (RT-AC86U) runs asuswrt-Merlin, if that matters to anyone… been a PIA person forever, but they don’t support router-based configurations for Wireguard, and the workarounds that I know of aren’t that enticing (requiring constant tweaks, etc., just to under-deliver) it’s that time of...
-
G- 18 Posts - GribnikHello. When will the new firmware for our router with WireGuard support be released? And will it come out at all? Firmware has been released on all routers for a long time. If I knew that the firmware for this router would come out so rarely, I would not have bought this rare shirt.
-
- 23 Posts - RS61My home setup is a gigabit fibre connection into a bridged modem into my RT-AX88U which is set up as the main router in an AiMesh with 3x AX82U nodes, all with Cat6a wired backhauls. It's rock solid, and normally I get my gigabit up and down. Everything runs the latest up to date Asus own... -
U- 3 Posts - UtaWhat I would like to do is place a wireguard vpn on either on my NAS (AS3302T) or on my router AX58U Asuswrt-Merlin (use port forwarding so only the NAS has the wireguard vpn) but neither have the capability for wireguard. As a work around I thought about one of those small GL.iNet GL-MT1300...
-
M- 10 Posts - mrmasonI setup the wireguard server with following params: On Server: Allow DNS = on Enable NAT Ipv6 = off Preshared key = on Persistent keep alive = 25 Access Intranet = on Apply All Settings Setup client: Address 10.6.0.2/32 Allowed IP's server 10.6.0.2/32 Allowed IP's client 0.0.0.0/0 Create the...
-
F- 4 Posts - Funnyland123Here is a link from Asus with firmware version 3.0.0.4_388_20532 where the bug with Surfshark and Wireguard has been fixed. https://www.asuswebstorage.com/navigate/a/#/s/88D77932EB6648A087CC04D34A14C63AY
-
- 3 Posts - JohnoI see other Asus AX routers have Wireguard as a VPN option but not the AX-86U. Is support expected and if so when?
-
E- 11 Posts - EdCaffreyMSMorning! I was looking at my VPN vendor's site today, and found they are now offering router support for WireGuard. I've been running Asuswrt-Merlin firmware on my RT-AX86U since it was new, and it currently does not support WireGuard........ and am wondering if it will be coming out with...
-
- 5 Posts - m1nkehthe installation note when you install WireGuard manager from Martineau is unclear to me.. can someone help me out please? Is it a warning, or an 'option' re: hardware accel? | ******************************************************************** | | * NOTE: WireGuard® is incompatible with... -
C- 55 Posts - cc666I currently have Nord VPN and it has no config file for the wireguard protocol. I know there is a work around but I am not experienced enough to attempt it. I am looking for suggestions, I see Proton and Mullvad as viable options. Which would be better for speed and security? CC
-
L- 15 Posts - LogiFor a simple remote connect back home when traveling, access the Router and that mostly, I need something light and fast, will Wireguard perform better than OpenVPN? Thanks NOTE: Using AX88 with the latest 388 FW
-
J- 22 Posts - javoI just installed gnuton 387.02 for my TUF AX-5400 mostly to have access to wireguard, after a surprisingly easy time I could install both Entware and Winguard Manager, actually, amtm did everything. The problem is that I have a windows computer and use putty to connect to the ax5400 via ssh and...
-
L- 19 Posts - laclacHello, I would like to install Wireguard on my RT-AX58U with asusWRT 386.7_2. But I am not very strong and I did not succeed. When I launch the installation of https://github.com/MartineauUK/wireguard It tells me : ***ERROR: Entware directory '/opt/etc/' not found? - Please install Entware...
-
F- 19 Posts - Funnyland123Asus AX88U wireguard problem! Hello, I have now bought an AX88U and also imported the latest original firmware, which Wireguard now also has. So far so good: Now to the problem, I downloaded the corresponding config from my VPN provider and also installed it on the router. If I activate the...
-
F- 13 Posts - Funnyland123Hello, everyone, I use a GT-AC2900 with the Merlin Verion 386.7 2 and so far everything is going quite well. Now I wanted to test Wireguard as well, but I absolutely can't get it to work. Could someone possibly help me? Unfortunately it doesn't work with the addon at all to get something to...
-
A- 9 Posts - ammoofficialHi, I’m new to this forum and new to routers. I was wondering whether someone can point me in the right direction to the RT-AX68u wireguard firmware or instructions on how I can install the client on the router. Look forward to hearing from you. Thanks
-
F- 1 Posts - fixideHello to all, I am looking for a router. I have some wifi equipment but not especially looking for high speed wifi (nothing in 6). Most of my network is wired with 1gbps ethernet. Currently my entire network is behind a ISP box and two non manageable switches that power the house. I have a lot...
-
R- 2 Posts - Riddick2099Hello. I'm Thorsten an new in this forum. I want to try wireguard on my asus RT-AC86u with the latest Merlin firmware installed. I have installed wireguard with entware. Also i have imported my wireguard conf. file. Now i have a peer called wg11. I can start this peer but don't know how to use...
-
D- 2 Posts - DocUmibozuHello, I tried to read the about 2 thousand posts on the wireguard manager to configure a wireguard client. What I want to achieve is this: all clients to my ISP, one client to wireguard VPN. Well, it seems impossible. See this: Sat Jul 30 15:02:00 DST 2022 ============================ [✔]...
-
M- 5 Posts - MindraidHi guys I'm currently using OpenVPN on Asuswrt-Merlin 386.7 but would really like to have Wireguard. My Asus router: RT-AX88U So my question is, does this firmware support Wireguard at the moment or will it be implemented later? Best regards, M
-
A- 3 Posts - Andrey23I have router Asus RT-AX86U with Merlin firmware 386.7_2. Yesterday I installed wireguard via MartineauUK WireGuard Manager. Wireguard works in policy mode as a client via connection to the VPS. Only 2 devices from the local network are configured to work via wireguard, and the rest directly via...
-
S- 32 Posts - Scott DHello. Sorry if this has been asked and answered before but I'm looking for a fast Wireguard router that I don't have to use/add additional software to function. I currently have a GL-iNet Flint(GL-AX1800) that is working OK with Mullvad imported Wireguard config files. It worked right out of...
-
F- 5 Posts - freelancerCan I configure the server on the Netgear r9000 Vorxel? Can I see the guide on the official website to configure the interface?
-
J- 32 Posts - javoJust a couple of days ago, Asus published support faqs for Wireguard https://www.asus.com/support/FAQ/1048281/ But in the documentation says that wg support will be on fw 3.0.0.4.388.20000 or later, but right now most of the fw versions are .386 Are there in this moment some routers that carry...
-
J- 21 Posts - juanantonioGood morning everyone. I'm trying to redirect my Wireguard server to a Wireguard client configured with my VPN provider profile. I have followed the excelent guides of @ZebMcKayhan and @Martineau, and everything seem to be OK. I connect to my own server located in an Asus RT-AX86U from the...
-
L- 8 Posts - ljg1000I know this should be obvious, but I am a bit confused. I have an RT-AX88U using the latest release Merlin software. I was wondering if the ASUSWRT now supports Wireguard for this model and/or when Asuswrt-Merlin may support Wireguard. My recollection is that Merlin is waiting on a finalized...
-
S- 1 Posts - synfinaticIs there a way to configure a macOS wireguard client to automatically run a shell script after the tunnel comes up? I'm using the wireguard client from the macOS App Store.
-
S- 6 Posts - sat4allHello Just installed Merlin fw on ax11000 on the changelog is CHANGED: Added Wireguard module + userspace tool to GT-AXE11000. but i dont see an option in the GUI to manage or set up WG Please advise Thank you
-
A- 2 Posts - andyktHey all, I'm trying to work out if I can use my NordVPN details with the Wireguard implementation in Voxel's firmware. Using this guide I managed to source the info: https://forum.openwrt.org/t/instruction-config-nordvpn-wireguard-nordlynx-on-openwrt/89976 But sticking this info in the...
-
P- 1 Posts - Petter1Hey there! I have a external Server, which I connect to using WireGuard. WireGuard can't be installed on some of my devices. That's why I want to connect my whole HomeNetwork using my Orbi. I found Voxels CFW for RSR50 which allows this and wanted to ask, if there is somthing similar for the...
-
J- 1 Posts - javoI've been trying to use RC3-3 firmware to setup a wireguard client with my vpn provider. The connection with my vpn server is ok, but as soon as I enable the wireguard connection as the active one, immediately I am unable to connect with anything (site, server and so on). As soon as I disable...
-
P- 13 Posts - PortolanGreetings to all. I am looking to buy a new ASUS AX router. I use a Torguard VPN that is loaded on my computer as a client. It uses Wireguard and is terrific. I would like to load my VPN on a new ASUS wifi6 router that has loading of Wireguard on the interface/gui as a specific option. It is my...
-
J- 6 Posts - javoHello, I have a TUF-AX5400 router mainly to connect to private vpn servers on openvpn protocol, and it is working ok, but the speed on openvpn is less than half (< 50 Mb/s) of my current speed; and my vpn provider just released wireguard router files. I know WG is much faster than OVPN, so I...
-
- 32 Posts - gil80My router is the AX88U using Merlin 386.5_2 firmware. I would like to incorporate WireGuard in the GUI VPN section. Is it possible? Would you recommend against it? -
B- 7 Posts - BlackIceSo the firmware at https://drive.google.com/drive/folders/1wvFKrOprbgDcrTk6yh84OOm8uZHsPgIZ has been stalled on these models for months (like 3 or 4 months)...I was thinking by now almost April they would have released new firmware supporting Wireguard (And thus Merlin could work his magic on...
-
A- 8 Posts - AsusRogcould vpn director be more advanced than vpn fusion? and ax86u would it be possible wireguard client vpn?
-
- 29 Posts - StardustHey all. Is it possible to install and use Wireguard on my AX86U with NordVPN? If yes, how? For now I am using NordVPN on the router the "normal" way. I am using Merlins 386.4. regards -
- 4 Posts - FantasyonlyHey guys, I’m completely new in this router world, used my provider device before but I thought it would be cheaper to buy one instead of paying a monthly fee and the provider device doesn’t support VPN, so I was searching for routers which support Wireguard, a lot of people are saying that...
-
M- 15 Posts - mdoverI see there are plans to add Wireguard to the Merlin GUI for the RT-AX86U, but interested in the RT-AC86U. I’m using the stock firmware for Openvpn and setup a home server and only getting 25 mbps down on a gig connection in an aimesh setup. I can’t figure out why it’s so slow, but I think a...
-
M- 11 Posts - MarkusFredI've just installed Asuswrt-Merlin on my RT-AC68U. I'd love to use Wireguard with it but couldn't find any setup/installation instructions. I now from Asus original firmware this model is not supported, but I thought with the Merlin firmware it is. Is this available or even not planned in future...
-
W- 9 Posts - WycleffHi, I recently setup Mullvad VPN with OVPN on my RT-AX58U. Before i didn't use a VPN or something like that (German Bubble User) but i setup Wireguard on my Pi4 to connect from everywhere with my Mobile Phone into my Homenetwork. Now after setting up Mullvad on my RT-AX58U with this Guide...
-
K- 13 Posts - KrakadilI was about to buy a AX86U for 219€ -45€ but the price bump up, so I found the TUF AX5400 for half the price (119€ vs 249€) and maybe it is the better choice for me (I dont care how it looks). I saw it will get Wireguard and now I need to know how it will perform over SAMBA/USB. Thats what I...
-
K- 13 Posts - KrakadilHey, looking for new Router. What I need: - Wireguard with up to 40 Mbit/s - NAS (just plug in 2.5 hard rive in USB and use it over Samba) with 100/80 MB/s - don't care about Wifi (got one Router per room and up to 50 Mbit/s is enough) - Merlin Support I can get a AC86U dirty cheap but...
-
R- 51 Posts - RicklndnSo I have successfully got wireguard working on my router RT-AX86U with merlin via ssh. My question is when will merlin start building a GUI ? This month? Next month? I think it will be a lot more easier for everyone.
-
V- 8 Posts - VPN_NewbieHello. After reading lots of posts and information, specially this and this, I have configurated a semi-successful VPN server on my ASUS RT-AC86U router (Merlin 386.2_6). This is my network scheme: And this is what I want to achieve: So, I want to connect from several clients to several...
-
- 4 Posts - vstevenphanI'm using VPN Director in ASUS Merlin to control which website goes through VPN. With previous Merlin firmware, I can only use OpenVPN. I see the newest update has Wireguard. Is it true? Is it stable? I don't have the router now, but if ax58u has WG on merlin, i will buy one
-
A- 6 Posts - ASadaniHi All, I'm a bit confused. Did wireguard get ported to the latest merlin firmware for the AC86u? I had tested it on the AX88U and it worked well. but I want to use it on the 86u
-
- 3 Posts - GrootOn my RT-AX88U I've set up Wireguard Manager and all devices connected to it are running through VPN. I wanted to also install Diversion to block ads on all devices. However, I couldn't make it work. All devices were running on VPN but the ads were still visible. Is it possible to make it work...
-
- 17 Posts - Chewie420Hello I just realized that with OpenVPN I was getting limited speeds. I only had 160 mbps service until today I upgraded to 500 mbps. If I use my VPN I only get 200 mbps and if I disconnect I am getting 500 mbps. I am using Torguard as my VPN provided and wanted to install wireguard but wasn't...
-
D- 5 Posts - DreaZAnyone know which AX-routers that officially support Wireguard. And have anyone tried it?
-
F- 2 Posts - fearzTried to search but couldnt find a definitive answer,,,
-
C- 11 Posts - CTVHi All, As the title implies, I am looking to another (cheapest) Asus router which natively (through ASUSWRT) supports both WireGuard & VPN Fusion, the latter capability (assign devices to different VPN profiles) I suspect might be supported under another (newer?) moniker. I currently have an...
-
- 10 Posts - WeggyHi, From what I've seen I think the answer is no, but I wanted to double check. Will Asus Merlin be able to allow for wireguard at some point? Or is it simply not possible due to limitations. If it helps, I'm running a ASUS RT-AC5300 Many Thanks
-
A- 4 Posts - AsusNoviceI have managed to setup Wireguard on 2 x RT-AC86U on USB sticks. It works "conventionally" as a Client > Server using the standard configuration files e.g. wg0.conf for the client and wg1.conf for the server. The RT-AC86Us are continents apart and each end on a "normal" ADSL connection i.e...
-
A- 2 Posts - arkadeI'm a little confused about using custom firmware on my R9000 to enable wireguard client. Does Voxel firmware now include it as standard or do I need to install the Kamoj add-on too? (Is this addon only available to beta-testers?). Thanks a lot. x
-
A- 9 Posts - ASadaniIs it possible to incorporate the Wireguard vpn into the AC86U and other firmwares? The protocol works quiet well on the AX88u
-
D- 5 Posts - DreaZLet's say I want the router to go through WAN and another device. How do I set that up in Wireguard?
-
- 2 Posts - heysoundudehttps://tailscale.com/kb/1122/wireguard-dynamic-ip/ it's free for personal use per their homepage, cross platform... Can anyone comment positively/negatively? -
J- 10 Posts - juniorsweetI've been happily using @Odkrys' implementation of Wireguard on my AC86U for a while now. https://www.snbforums.com/threads/experimental-wireguard-for-hnd-platform-4-1-x-kernels.46164/ Recently I've run into an issue with leaking DNS requests that I haven't been able to figure out. I've...
-
- 5 Posts - ToasterPCHey there @Martineau ! Just wanted to tell you how grateful I am for the script utility you developed (tried to reply but it seems the thread was too old) It managed to drop the deployment time from my RPi in 40 minutes to about less than 5 :D ! The test device worked pretty much instantly...
-
A- 5 Posts - amd94Hi, can we help me? I now installed Wireguard to Asus RT-AX86U... but speed is slow... when i run speedtest - my CPU in AX86U - is 100 %... and result of testspeed - download is max 2-3 Mbps.... maybe I missed something when setting up? i'm using latest enware package and wireguard from...
