Advanced search results
Better search
Select: Thread titles
Keywords: VLAN
Posted by:
Search forums: All forums
Results count: 750
Select: Thread titles
Keywords: VLAN
Posted by:
Search forums: All forums
Results count: 750
-
M- 2 Posts - mbze430I own a RT-AX88U Pro and recently update the firmware and wanted to use the VLAN feature. Normally with any SMB AP product, it is a slam dunk easy config. But I am not sure about these ASUS consumer APs. Here is the topology of my network (simplified) Questions: 1) In AP mode, under the...
-
S- 1 Posts - ssm1234After some trial and error and head scratching I’ve been able to set up a VLAN for my IoT devices on my AX 11000 Pro. However, I need to be able to access some devices on the IoT VLAN from my phone on the main network. (I’m using a beta 9.0.0.x firmware upgrade.) How do I do this? Thanks.
-
- 5 Posts - ptthstrHi everyone, The AX88U Pro has recently added support for VLANs in release version 3.0.0.6.102_21514 (June 6th, 2023). I have two questions related to that: Has the feature been added to Merlin as well? VLANs obviously work in router mode, but are they supported in AP mode? What I mean is: if...
-
J- 6 Posts - jelmdJust downloaded the latest release for an GT-AXE16000-4250 and wondering, why it doesn't contain /www/Advanced_VLAN_Content.asp as well as /www/Advanced_VLAN_DHCP_Content.asp and /www/Advanced_VLAN_Group_Content.asp ? VLAN support is actually the reason, why we bought it. The Asus downloadable...
-
- 15 Posts - HELLO_wORLDHello, I will describe here my experience regarding the creation of an additional SSID (on top of the main and guest ones) on a R7800 in AP mode, with @Voxel's firmware, and having it in its own VLAN. So I have my main router (no wifi) under OpenWrt. The router is connected with ethernet to... -
B- 1 Posts - BigScreamSo Ive looked at similar threads, but nothing is concrete in their solutions to achieve what I want to do. I have a Raspberry Pi that is running docker. These docker containers are IPV6 enabled and want to be able to access the IPV6 Internet. For this to happen you need to enable Static Routes...
-
- 4 Posts - ToasterPCHey there! I was finally able to segment my network using the guest SSIDs of both my GT-AX11000 and my RT-AX86U on AP mode (both HND, non-Pro models), though I had to disable AiMesh in the process (so far, no major issues). However, I've been trying to add VLAN tags to the individual Ethernet...
-
- 6 Posts - skazerCan I configure VLANs (and bridging) within the UI using Asus-wrt Merlin firmware? I looked on the page, but didn't see any reference to VLANs. I'd like to be able to segregate IOT devices and the like.
-
P- 5 Posts - poudenesHi All, I have a Asus GT AX 11000 router. Also digital TV and configured the IPTV in the router. VLAN 300. Skynet show now those blocks on the VLAN300? It looks strange because VLAN300 is a closed network with my provider for the TV. This inbound block must show the external IP of my internet...
-
P- 2 Posts - poudenesHi There, Is there any chance to use VLAN on GTAX11000 (no pro)? Using command line for example? cheers,
-
S- 5 Posts - stevenmAny AIO besides Asus Pro with Vlan with stable firmware?
-
Y- 13 Posts - YardieI hope this is the right section. I have a GT-AX11000 pro as main and GT-AC5300 as AI Mesh node, connected by Cat6 cable. I have no VLAN tab in the LAN section. -Is this because the 5300 doesn't support VLAN (seems odd given its two physically different devices)? -Given my setup, would the...
-
O- 1 Posts - offrampHello, After changing my ISP, this one provide me an integrated ONT/Router ZTE F6640. The connection chain was: FTTH ---> F6640 ----> RT-AX89X ----> Switch -----> ISP STB, LG TV, Android TV BOX. Everything connected to the unmanaged switch worked without issues. The WAN configuration in...
-
T- 21 Posts - TonsToday I bought an Asus ROG-AX11000 Pro, and to my surprise, when updating to the latest firmware version, the options for 'Guest Network Pro' and to create multiple VLANs, etc., are not available. !!!!! :O v 3.0.0.4.388_24198 I also have the AX6000, (v.3.0.0.6) and it does have these...
-
R- 4 Posts - robcaI'm currently using two RT-AC68U with Merlin, one as main router, one as AP with a guest VLAN. I set up my network so that IoT devices with vlan 101 can access the internet but not the main network (vlan 1), and IoT devices on vlan 102 cannot access either internet or main network (but devices...
-
- 1 Posts - ToasterPCHey there! I've been up all night banging my head against this problem. I'm trying to get both a GT-AX11000 and a RT-AX86U (both running Merlin version 3004.388.5_0) to work using a 2.5GbE backhaul for AiMesh in AP mode with separate VLANs for each of the Guest Networks, but so far, the GT has...
-
- 26 Posts - ddaenen1The deal is as follows, i have configured 2 VLAN's in my network. The main LAN (VLAN 1) and a Public LAN (VLAN 10), both with their own DHCP server and subnet. The Public is mainly for guests that want wifi access in the house and is completely isolated from my main LAN. Until now, i really... -
- 11 Posts - DiveblasterHi I just bought a AXE16000 and installed Merlins latest firmware. I was going to play around with VLAN options that should be found under LAN -> VLAN. I cant find that tab under LAN at all..im using GT-AXE16000_3004_388.5_0_rog_nand_squashfs.pkgtb. Is it hidden or do i need stockfw for that... -
- 5 Posts - davekstlI have 45 devices on my LAN using a GT-AX11000 router with 3 Asus access points. I want to separate the network for the security wired and Wi-Fi devices from the entertainment devices from the productivity devices. I do not know much about vlans, but I am thinking this is the way to go, multiple... -
D- 3 Posts - dr_dunnoHi, I just bought a TUF AX6000 router, and thought I could use it to replace my ISP provided router. My existing ISP-provided router is connected to the fibre termination panel, and the router is configured to use PPPoE. I missed the part where a VLAN ID configuration is required on the router...
-
R- 10 Posts - RT-N66UI'm experiencing an issue with my Dynamic Domain Name System (DDNS) not updating when the WAN cable is reconnected on my RT-AC68U router running the latest Merlin firmware. This problem seems to have emerged in the recent firmware releases. To address this issue, I have to manually click 'Apply'...
-
I- 1 Posts - idioterieI have a Asus XT8 running 3004.388.4_0-gnuton1 I added the VLAN setting to support my STB which is on VLID 4: which connects to the STB. All is working perfectly, until I stress my 1Gbit Fiber bandwidth. As soon as I hit approx 20MB/s the VLAN 4 TV signal gets choppy and watching. Any speed...
-
P- 2 Posts - PaddyPDXTrying to delete this thread but no option
-
J- 24 Posts - j3tzGreetings, Am new to routers, but trying to isolate two computers connected to router via ethernet. Router gives me option to create VLAN's so I was thinking to create two VLANs for home and work computer. Both would be plugged into router in specific ethernet ports. Separate VLANs would be...
-
X- 1 Posts - xenomorphHello I flashed AsusWRT on my AX82U and use it in Access point mode where one LAN port connect to FW with DHCP etc. I want to create guest IoT SSID on the Asus and make port to fw a trunk port. And assign tags to IoT SSID. Seen a few posts but most use router in routing mode. Anyone can let me...
-
V- 1 Posts - viktor.colapI use Asus RT-AX86U on my network, but I use it not as a router, but as a switch. That is, two tagged vlans (100,200) come to LAN1 and I need clients, when connecting to wi-fi, to gain access to vlan 200. And I, as an administrator, connecting with a cable to the LAN2 port have access to...
-
T- 6 Posts - treefrog(New to Asuswrt, Merlin, and router hacking in general, so struggling to get up to speed with all the tools here... could use some extra help please) My goal is to have a reasonably secure VLAN for my IoT devices, but still be able to interact with them through devices like my phone connected...
-
T- 26 Posts - torchddvI have an RT-AX-88U running the latest (3004.388.4) version of Merlin. Wan type is auto IP. I have a couple of guest networks set up already through the GUI. I now have a relative that will be staying long term in a guest cabin and wish to provide him a wired VLAN on physical port 1 only (no...
-
F- 37 Posts - fredmcHi, I've posted a similar thread recently but it was moved and I never did receive any reply, so I'm trying again hoping for any help. As this question is independent of any ASUS model, I ask the mods to keep it in the general forum please. I have an Asus router running Merlin latest firmware...
-
G- 1 Posts - gpz1100Using the latest telnet-enable from (https://github.com/bkerler/netgear_telnet) I was able to successfully gain console/telnet. On the old rt-ac68u with merlin's fw, I have several several vlans defined using robocfg which are associated with different ssid's (some primary, some guest)...
-
A- 12 Posts - awedioheadSo I have a four port DIY router running pfsense and a Zyxel 24 port managed switch - neither are currently in use on my home network. I'm just connected to them via an old laptop to configure the web ui's. This is because my wife is very reliant on internet and access to our media server so I...
-
D- 19 Posts - dmbminaretHey all, LAN ip addressing is getting close to capacity, so thought best practice to create new networks for Trusted, Guest & IoT. I have set the rules in pfsense that trusted VLAN (phones, laptops, watches, TVs, etc) has access back and forth to default LAN (reserved for static servers, VMs...
-
B- 2 Posts - binib26607Hello, I am reaching out to gain insights and solutions regarding the management of VLAN configurations on the RT-AX88U Pro router. Specifically, I'm focused on how VLANs are assigned to SSIDs. I observed that the router automatically, and seemingly mandatorily, creates a VLAN ID for every new...
-
G- 20 Posts - georgevHello all! I'm using an RT-AC86U with Merlin and I would like to have three different wireless networks (all with different SSIDs and passwords): one for trusted devices, one for guests, and one for IoT devices. On the guest and IoT networks, I want all devices to be isolated. At this point...
-
B- 6 Posts - bulgar71Hello everyone, I am a new user on the forum and would like to ask for support. I switched from a Netgear Nighthawk X4S R7800 router with firmware to GT-AX 6000. At this point I am surprised by the lack of VLAN on Asus-Merlin firmware 3004.388.4 So where and how to set Vlan?
-
T- 4 Posts - TyrtyrHi there! I'm trying to self-host a photo sharing service for my friends and I want to do it securely without exposing my home network. Context: I have a little Intel NUC to host a website for my friends and family. NuC's going to be running some VMs. I've wanted to self host because some...
-
N- 4 Posts - NogUVHi everyone, I have a non-wireless router already (opnsense) and I'd like to know what wireless mesh systems I can use with this. (I currently have powerline, it works ok, but it taps out at 80Mbps roughly) I would like to operate it in access point mode (AP mode, or however it's called...
-
R- 4 Posts - robcaI have been happily using a guest network to isolate my IoT devices on a separate VLAN across two different RT68U routers with Merlin. For more info, see here https://www.snbforums.com/threads/rt-ac68u-guest-networks-in-ap-mode-using-vlan-and-iptables.64172/ I have now installed a new device...
-
- 9 Posts - SeeJayEmmI have an RT-AC68-U in AP mode running Merlin 386.11. I am trying to segregate my guest network on it's own VLAN. The AC68 is connected via the WAN port to an OpnSense router. I've followed the guidance I've found here on configuring VLANs on the AC68 and believe I have configured it correctly...
-
C- 8 Posts - cloulessLooking for Guru:) how to configure my Ethernet cable going downstairs, I can only have one cable. So I need to have my main intranet plus one or two Vlan with no access to intranet to the second switch, the Wi-Fi config was easy got two IOT in guest network, but I am not completely sure about...
-
L- 2 Posts - LogiIs it possible to do it or I need an external managed switch with VLAN capabilities connected to the AX88U first? Thanks
-
- 6 Posts - jetonrHi all, New around here, I have been reading through the forums and finally managed to turn my DSL-AC68U into a dumb access point that creates1 IOT wifi, one Guest and the private wifi ( all three have both 2.5GHZ and 5GHZ ). I will add the script below just in case although everything is... -
E- 6 Posts - EtherionHi. I got a brand new Asus GT-AXE16000, and I was shocked to discover that this flagship router cannot set up VLANs. So Reading on this forum that the Beta does support it, I flash the latest Firmware Version:9.0.0.6.102_4856 and, after a few minutes of mucking around it, found out that one can...
-
L- 3 Posts - leereesI'm trying to disable VLANs so that I can have my Eth and WiFi networks share the same subnet. Currently they can't see each other. I've looked everywhere but cannot find the VLAN settings, there's no tab in the LAN page. Can anybody help? My routers are AX92u's.
-
B- 5 Posts - bimotaI actually have two questions under this title, if anyone can provide some insight. Does anyone have any insider information on whether the RT-AX88U will receive the 3.0.0.6 firmware, namely for VLAN/network segmentation per SSID? Can you have a RT-AX88U PRO with VLAN's as the base unit meshed...
-
- 32 Posts - drinkingbirdWith 386 and 388 code base, you can make use of two built in VLANs (plus the main LAN VLAN 1) to further segment your wired and wireless network, even on non-pro models. This definitely works in router mode on all models that support AIMESH and these code versions. From what I have seen (but... -
M- 5 Posts - mmjlmjlI've been testing a RT-AX88U Pro's VLAN capability and I'm running into some issues and/or knowledge gaps. I've set up a guest VLAN (10) for 5G wifi. I shared/assigned this VLAN to two of the ETH ports (Ports 4 & 5). I found that there is no capability to use static DHCP reservtions on a VLAN...
-
- 11 Posts - ali.Hello all, I am planning to create VLANs on my PfSense appliance, however there are couple of issues I want to overcome. From what I understand I will need layer 2 switches which are VLAN aware to accomplish what I am trying to do. The added complexity is that I want one VLAN to be broadcast on... -
M- 4 Posts - mmjlmjlI just recieved the RT-AX88U Pro, I was wondering if the VLAN implementation is already available in a Merlin build (either Beta or final)? If not, does anyone have a clue when ASUS will release this in a stable version? I need to decide to go for the ASUS beta firmware or straight to Merlin...
-
D- 25 Posts - DiliMeHi folks, I see here on SNBforums and on Reddit are dozens (or maybe close to hundred) posts about VLANs on Asus Merlin routers, though I haven't found a comprehensive guide/Howto. Anyone can recommend one for my case? My main is AX86S (router mode) and also a second node AC68U that is wired...
-
R- 7 Posts - restocktonI've been doing home and small office networks for years, but now I'm venturing into larger (but not enterprise) networks at work. I have a new Ubiquiti network I'm trying to set up to replace an existing network for one of our offices. To keep things simple (or so I thought) I'm trying to set...
-
A- 2 Posts - andremmfariaHi all, I have a question related to the way that AIMesh works with different router models. I am in need of a VLAN solution for different kinds of devices of my network (home server, smart bulbs, etc). I would like to define a VLAN for each WIFI network SSID i create on the router (that would...
-
N- 5 Posts - nlsquareHello First and foremost, I'm waiting for a new router to be back in stock to upgrade so this will just be a temporary fix. I currently have a rt-n66u with a 500mbps fiber connection, recently upgraded from 400mbps cable connection. I used to have 3 computers and magicjack connected to the...
-
- 2 Posts - dougmPFSense+OpenVPN: Problems Routing Specific VLAN traffic out VPN I am running PFSense+ 23.01 (same basic setup as CE 2.6.0) in my home lab. My box is a 2x1gigE port Core-i7 NUC. Problem is that users on Vlan 4 not able to access internet thru an OpenVPN client tunnel (which connects to a VPN... -
M- 34 Posts - mustardquailHi there, I've been having some issues with my Asus RT-AC5300 router. I've been thinking about upgrading for a while, so I'm looking at potential devices to upgrade to. The issues seem to happen with intense lag spikes and disconnects when a heavy network load is happening (two devices at a...
-
- 7 Posts - giopasHi all, In my educational journey, I am trying to conceptually (for now) explore how I could better organize my internal home network using VLANs. The ultimate purpose is to allow me to monitor and increase the security of my network, while keeping a user friendly environment. I was therefore...
-
O- 3 Posts - omrijHi I know this question is regarding a beta (currently 9.0.0.6.102_4856), but maybe i'm missing something I need IPV6 for some of my docker containers (using macvlan) and I want the docker network to be in a differant vlan every container is configured to obtein ipv6 address using SLAAC but when...
-
R- 10 Posts - rolfiThis is my currently planned setup: Where I have a switch that manages the VLANs, and after that, my main ASUS wifi router (RT-AC5300) and two ASUS ZenWiFi AX (XT8) wifi extenders. Now, I want to differentiate by SSID which VLAN the devices should reside in. For example, the guest wifi devices...
-
E- 63 Posts - Eric LiebFinally got it working on the AC86U so figured I would share incase anyone else is interested. In my setup my main network is VLAN 1 Untagged and then VLAN 200 Tagged on the port with the AC86U in AP mode Adopted from https://gist.github.com/Jimmy-Z/6120988090b9696c420385e7e42c64c4 This will...
-
- 4 Posts - ali.Hello all, I have recently setup a pfsense appliance and put my Asus Router in a AP mode with AI mesh enabled with two remote nodes. Is there a way I can implement VLANs to segregate devices on different AImesh nodes. Thanks in advance.
-
L- 2 Posts - learninghouseMy goal is to setup Home Assistant virtualbox machine to sit on the Asus WRT Merlin 2.4ghz Guest network (I'm assuming the default VID is 501) to isolate from my main network. I could access the Home Assistant frontend page on the VLAN (192.168.101.2:8123) but not from the main network...
-
S- 20 Posts - scryptHello, Newbie here, I am trying to setup a basic home network separating IoT devices and my personal devices. I have a Asus RT-AC68U in Router mode running Merlin firmware 386.10 sitting behind my ISP router as the WAN. I want IoT devices(both wired and wireless) to be on a separate VLAN with...
-
E- 15 Posts - Eric LiebSo I have setup my PFSense and Switch and now working on my AC86U that I want to use for both my main network and a guest network Vlan 1 - Main Network Vlan 200 - Guest network I ran this Which works great for the guest network (it gets tagged as VLAN 200 and everything), but the main...
-
- 9 Posts - eleVatorDabbling around with a new Opnsense Box. Added the RT-AC86U (latest fw) as Access Point, everything works. But i just cannot get it to work in a VLAN, am i right to assume that this Asus Model does not support being AP via VLAN? -
E- 1 Posts - Eric LiebNevermind please delete this thread.. I am an idiot and forgot i still had the same SSID on another router
-
E- 14 Posts - Eric LiebSo I decided to fully change my network to a dedicated opnsense/pfsense router with an 8 port managed switch and using my ax86s and ac86u in ap wireless mode. I still need a wireless guest network so do I have to introduce a 3rd wireless router on its own vlan or is there a way for me to tag a...
-
M- 10 Posts - mooky1977I have this router: RT-AC66U_B1 (base model: RT-AC68U) BCM470x - Cortex A7 ARMv7 revision 0 - Rev. c0 (Cores: 2) Currently running: Merlin firmware 386.10 in AP mode, all SSID's seem to share my default LAN subnet as doled out by my pfSense router's DHCP server, 192.168.3.100+ and there...
-
C- 7 Posts - clvk07Any idea when the vlan feature available on stock firmware will be available on merlin?
-
S- 3 Posts - ScrewdriverI need to separate my wife office computer and IP phone from everything else. VLAN 1 will be all of our home device, and VLAN 2 will be for my wife's work devices. Both VLANs will be on their own subnet. I have asked this in a couple places, and am I getting...yes, it will work, and others...
-
A- 2 Posts - AshkaanHi there, I'm having an issue with WAX630E units at a site. VLANs are correctly configured but behaving oddly. Here are some verified facts. Connect WiFi to VLAN A SSID = Get VLAN A DHCP (good) Connect WiFi to VLAN B SSID = Get VLAN B DHCP (good) Connect CAT cable to VLAN A + Ping Printer on...
-
K- 7 Posts - kelmi2022Hello, I understand that XT8 does not support VLANs, no config, no QoS, etc. But, does XT8 understand VLANs in a way, it would maintain VLAN tag for up/downlink? Or does XT8 drop all Ethernet traffic, which is having VLAN tags? Regards K
-
J- 7 Posts - jasonregHi, hopefully quick question - apologies if it a repeat. I have successfully set-up my 6100 and have added my desired VLANs to the LAN connection (in my example igc0). I would like to set up the 10GB ports to feed my switches on ix0 (Needs all VLANs) and ix1 (only needs a single VLAN)...
-
D- 2 Posts - DominikHoffmannI have a Netgate 1100 internet gateway. One of its ports is connected with a GS108PEv3, which powers three EnGenius WiFi access points and has a downstream GS108T connected to it. I cannot get connectivity on the configured port of the GS108T with a particular VLAN in use on the rest of my...
-
F- 14 Posts - _Frank_Hi, this is a long/detailed question with the hope to minimize follow-up questions. I’m about to get crazy with this issue and I would really appreciate help. My setup is: ISP -> router running OpenWRT (OpenWrt 21.02.5) -> Trunk (vlan 1, 3t, 4t) -> RT-AC68U (Merlin FW 386.9, AP mode) -> WiFi...
-
D- 15 Posts - datorexpertHow do I setup VLAN for ASUS RT-AX88U running fw 388.1?
-
S- 2 Posts - sarmenatorI have been trying to get VLANs on multiple SSIDs working on AX58U. I have used the scripts in below links as references https://gist.github.com/Jimmy-Z/6120988090b9696c420385e7e42c64c4 https://virtualize.link/asus-vlans/ I have been able to get the WLAN interfaces work. They function as...
-
R- 24 Posts - rlhWondering if anyone has been able to get IPv6 working using a WAN connection that utilises VLAN? In my country, VLAN tagging with ID 10 is required on the WAN port, with the IP address set using DHCP? I have had a trawl through the forums here but was unable to find any configs that people had...
-
R- 9 Posts - RamaHi, networking newbie here. I have opnsense set up on a mini PC and have just bought a TP link eap670 to use as a wifi AP. I have a both IoT devices and trusted devices (laptop, phone, etc) that are connected to my wifi so wish to have multiple SSIDs on my AP mapped to multiple VLANs (i.e one...
-
C- 17 Posts - coldheatI've got an asus RT5300 router currently. About to install -Merlin on it but only after I can confirm someone here has actually got VLAN to work... before I go out and buy one of those pfsense boxes. I only see like 2-3 tutorials via google search with no confirmed actions. Damn, wish this was...
-
- 14 Posts - XIIICurrently I have an ASUS GT-AX6000 router. This replaced my AC86U router. Initially, I was considering to use that AC86U router as an AiMesh node, but I noticed that the AC86U does not get the future Pro features from the current beta firmware (I'm particularly interested in the new VLAN... -
H- 5 Posts - HuflatischHi I have an Internet provider (telecom) that requires VLAN 7. (see example on a DSL-AC68U) Where can I set this on an AC88U or an AC68U. (Merlin doesn't offer that either) Without this setting I get no internet connection. cu HU
-
I- 4 Posts - iTheMaskI have FTTH from my ISP supplied through custom ONT device and I am trying to replace the router. I bought a new 3rd party ONT device which connect to my ISP Fiber cable and allows me to connect with ethernet bridge mode (I've already connected it to my Windows machine and did the setup with...
-
- 9 Posts - ddaenen1So i have been thinking for quite some time to set up isolated guest wifi to avoid any access to all devices on my home network. What i wanted to achieve was simple: 1. Dedicated guest SSID with own PW 2. No access from the guest wifi to any of the devices/systems on the LAN 3. Bandwidth...
-
W- 4 Posts - watergremlin0I know vlan has been a highly requested feature. Now that Asus has offically added it to a few devices, what are the chances of it showing up in Merlin? https://www.asus.com/support/FAQ/1049415/
-
D- 19 Posts - DonkomoHi I am shopping for a new ASUS router and wanted network segmentation but the current ASUS lineup doesnt offer that. Then I came upon this ASUS support page showing these models to support VLANS. https://www.asus.com/support/FAQ/1049415/ 2). VLAN supported models: RT-AX86U Pro, GT-AX11000...
-
M- 12 Posts - mrblack1134Hi all, I currently have a simple cable modem setup for my internet access: PC <-> [LAN port] RT-AC86U [WAN port] <-> Cable modem <-> Internet I'm tempted to switch to fiber and am told that the provider (Bell/ebox) provides both a Nokia modem (ie. an ONT) and a pre-configured router. I'm...
-
- 46 Posts - puremindHi ! Hoping someone can help... I've recently replaced a Netgear R8500 with a new ASUS GT AX11000 Pro. (Used to have a way older ASUS RT-N66U before with Merlin back then) I am trying to bypass my ISPs router with Asus' directly. For what I read around, it does require to set VLAN 10 in the...
-
D- 3 Posts - ds5686920After putting in my and brothers VLAN network I am wondering why with VLAN Lite (Netgear GS300 Switch Series) the LAN (trusted) is not tagged too. Is this to achieve design cost savings?
-
A- 2 Posts - Avi16000I'm using Asus GT-AXE16000 What I'm trying to achieve is to connect the outdoor Access Point to the Lan port 3 interface and separate that Lan from accessing the other resources on my network. I'm tried to follow up on the following guide - but no luck, it didn't work. I was able to separate...
-
K- 16 Posts - KhauronDevice: Asus RT-AC68U H/W Ver: E1 S/W Ver: Asus-Merlin 386.7_2 Factory reset done and JFFS formatted and enabled Hey there, can the community help me out here? I'm lost and don't know what to do next. I have the device running fine, but I would want to do VLANs for both, LAN and WIFI. I have...
-
S- 3 Posts - smellybellyWill we ever get it? Currently I use a startup script to move 2 of my 3 wifi networks (IoT and Guest) into their own separate VLANs (with isolation so that they can't talk to eachother within their respective VLAN). Obviously the aimesh system can (and does) VLANs, so I don't understand why we...
-
S- 7 Posts - SizzlechestI bought a Netgate 4100 and am using my existing Netgear RAX42 router as an Access Point. I cannot segregate the guest network traffic from the main network traffic. The router firmware does not offer VLAN support in Access Point mode. There are no OpenWrt or DD-wrt firmware options for this...
-
J- 3 Posts - JumpstarterFeature request, webui support for vlans....
-
S- 3 Posts - SelcalHi all, In some ways, this has already been asked, but then again not quite :). I haven't found specific answers for the R9000 on Voxel. I would like to isolate 1 (or more) LAN ports on my R9000 from the rest of the (W)LAN; while keeping WAN connectivity. The port(s) can just be completely...
-
K- 8 Posts - kyriosMain router : RT-AC3200 with FreshTomato 2021.7 192.168.10.1/24 : for main network (VLAN ID : 1) with DHCP server 192.168.20.1/24 : for guest network (VLAN ID : 3) with DHCP server ---- AP1 = RT-AC68U (AsusWRT-Merlin 386.7_2) Set as AP with IP = 192.168.10.2 WAN Port = Trunk port to main...
-
G- 3 Posts - gorstjWhat is the command to tag all wireless activity on wl1.1 with a VLAN tag? Use scenario: - isolated 5gz guest wifi (wl1.1 on br2) - disabled DHCP for the br2 - DHCP server and gateway is connected to a managed switch on VLAN 502 When I connect to a AIMESH node guest 5gz (i.e. the traffic comes...
-
- 14 Posts - KlavaroHello everyone! I have a RT-AX68U router, and I'd like to set up VLANs and subnets to have a proper DMZ and internal network to build a homelab. I followed this guide https://wu.renjie.im/blog/network/ax88u-vlan/ which helped me set up the basic stuff. Problem is I can't access the GUI nor SSH... -
- 21 Posts - crisagHello friends. Got an issue driving me crazy for a few days already. I have a RT-AC5300 with merlin 386.7_2. Standard configuration done by the web interface. vlan1 with 4 interfaces and br0 created with vlan1. Other vlans are for WAN. No hosts/PCs outside vlan1. One of my hosts can ping any...
-
J- 2 Posts - JaimeZXHey guys! I've been happily running Merlin on my Asus modems for several year now, and built Merlin setups for my mom and in-laws. But now my home router has been a 3200 (no longer supported by Merlin), and anyway it has insufficient LAN ports for my growing home network. So... I've built a...
-
- 4 Posts - fiyawerxHi - I don't currently have an Asus but wondering if this setup is possible as I'm imaginging it. My fiber provider (centurylink) requires vlan tagging (201), and with that it looks like I should be able to bypass their supplied router and go directly from the ONT to my own. My question is with...
