Advanced search results
Better search
Select: Thread titles
Keywords: AiMesh
Posted by:
Search forums: Selected
Results count: 245
Select: Thread titles
Keywords: AiMesh
Posted by:
Search forums: Selected
Results count: 245
-
B- 3 Posts - bbb27Hello everyone, I recently purchased an ASUS RT-AC86U to "replace" my ISP own crappy router, and noticed this "new" tech AiMesh that i never heard of. I bought a couple of Lyra routers/nodes, and pair them with my main router. So far so good, but every now and then my wifi gets completely...
-
C- 2 Posts - cino72I have been messing with aimesh it seems to work OK I had a hiccup or two but I am pretty sure I caused them. When i connect an Asus 68u as a node how does it handle the features of the AX11000? I searched some but couldn't narrow down the search to be useful all are hard wired back haul and...
-
D- 26 Posts - davelianHi, people who used aimesh, how aimesh performed for you? What are your thought? Is Wifi signal good? Can you use guest network, parental control etc? Thinking to buy ac66u b1 for aimesh with my current ac68u. Sent fra min SM-N950F via Tapatalk
-
A- 22 Posts - auriznI have been using AiMesh on over many AiMesh models for the past year and I would like to share some thoughts on AiMesh. Opinions are my own. Discussion welcomed. Lack of proper roaming support AiMesh does not support any of the 802.11 roaming standard. ASUS is relying on their roaming...
-
L- 23 Posts - Larry HandleyI have a Hitron coda - 4582u Router modem combo , And a Asus Gt-5300 in ap mode , ac68u in wireless node , asus 1900p in wired node, plugged into the wan port. It seems to be working , But the 1900 says it's in wireless mode ,even though I have manually switched it to Ethernet mode , And the...
-
U- 29 Posts - uk-chrisHello! Very new to the world of Asus and would very much appreciate some guidance, it seems what I thought would be easy may not be! I'm looking to run AI Mesh, I have three AC86U routers, my plan is... ideally... Main router on the main (first) floor connected to XFinity router. Ethernet to a...
-
S- 43 Posts - Sébastien GEOFFROYHi, I own a RT-88U (2 bands / 3200 mbps) working perfectly. I'd like to add an other router at first floor using AImesh (wire link between both) for my Wifi extension. Sons at first floor will use 5 Ghz to play with their Sony PS4. Which other Asus router you recommend me to buy ? Other...
-
A- 8 Posts - adambeanHey all, Have a GT-AC5300, RT-AC5300 and AC66u B1. I've had them in AiMesh for quite some time now. Generally speaking, they work great as of the last several firmware updates. What I keep fighting with, is crappy IoT devices that only support 2.4 (like WeMo). I'm using Smart Connect so...
-
G- 8 Posts - ggzdwyThe performance is not sufficient enough to stream high bitrate video(above 100mbps) under Aimesh. However, once I change the node to media bridge mode, they will perform well and stable for as long as they are on. Will these be improved under Aimesh mode in the future? In the latest...
-
J- 4 Posts - Jonathan DixonI have a house with thick walls so have a spare router acting as a aimesh node. The main router is a DSL-AC68U and the node is a RT-AC68U. The whole system can be completely stable for a while and then randomly the node will just drop all connections. The main things that connect to the node...
-
F- 4 Posts - FoggyHello, just wondering if anyone know what I have to do with get BT TV streaming subscription channels work via a DSL-AC68U (Main Router) with a AC5300 as the AIMesh node. The BT box is wired to the AC5300 and is working fine, network connection is ok etc, Netflix all good, etc. However I...
-
E- 13 Posts - EvilTechieHi guys, long time lurker but finally I could not fix something myself and need the help of the collective wisdom here The Setup: I have AT&T fiber (100/100) which is using an AT&T Arris router from the ONT (it is a must as it handshakes with AT&T) and I have 2x RT-AC86U, with one as AP Mesh...
-
D- 12 Posts - Damageinc84Hey Guys, New here and new to Asus. Replacing my Nighthawk R7000 tonight. I have them both broadcasting on separate channels next to each other and in general the R7000 is getting a slightly lower DB range to the downstairs where I am running Wifi Analyzer to measure readings. Any tips to boost...
-
E- 6 Posts - eriddlerGood day, I have a system consisting of: FritzBox 7430 from a German ISP ---> RT-AC5300 (VPN) which works fine (different IP addressing, etc). What I tried to do was setup the AiMesh with a RT-AC86U connected (as a node) to the RT-AC5300 last night; it worked with regards to discovery and...
-
G- 1 Posts - GawainXX2I'm considering purchasing a security gateway and placing my Asus routers from Mesh Router into Mesh AP mode. In addition to VPN, what features would I be looking at losing? I'm aware that I would lose guest Wifi but would I still be able to have multiple SSIDs? Will the ASUS phone app still...
-
S- 4 Posts - soneHi all, Other than the convenience is there any huge difference between AIMesh and Repeater/AP Mode? thanks kindly.
-
F- 1 Posts - fairmarketvalueMy network: AiMesh Main Router: Asus RT-AC3100 1 AiMesh Node: Asus RT-AC-1900P (IP Address-192.168.1.170) Current Firmware Version: 3.0.0.4.384_32799-gfe72567 (main router & node) The RT-AC3100 operates in "Wireless Router Mode/AiMesh Router Mode (Default)" There are two client devices that...
-
- 7 Posts - Brad IsaacHi all, I have tried just about everything to get AIMesh to work, but it still disconnects frequently and is unstable. My main router is a RT-AC68U my node is RT-AC68P. They are direct line of sight of one another about 15 feet apart. Per other suggestions here, I downgraded the firmware... -
- 6 Posts - tallytrUsing AiMesh with AC-RT86U and two (2) AiMesh nodes RT-AC68U, RT-AC1900P and it works pretty good. Noticed I have some IP cameras roaming around between the nodes but I can add only add 3 to the block list. Anybody, or is that just me? -
A- 2 Posts - acropolisHello Everyone! We have a large one-story home that has low signal/dead spots in the bedrooms towards the back side of the house because of a brick fireplace and chimney between the router and the bedrooms. AiMesh looks promising, and another AP/radio wouldn't hurt as we have about 40 client...
-
T- 5 Posts - Tarik MohallemI have a two-story house. The first floor with a RT-AC88U (primary) and one RT-AC68U as a Node. Both with firmware updated. Both routers linked by wired connection. In theory working. The problem is that the system does not identify the lack of signal of my devices, letting part of these with a...
-
J- 8 Posts - JOE.GHi, I was wondering how far away I could place the node from the main router and still have them work well, Also can I place Node and then have another node hook up wireless to that node or does each node need to connect to the main router?
-
A- 25 Posts - Antise7enHi All, I recently upgraded my home network to have two ASUS RT-AC68U routers so that i could create a mesh network in my house. Setup was easy and painless and everything seemed to work fine.... but, every so often i notice a blimp of maybe 15-60 seconds where i lose internet completely on...
-
A- 3 Posts - ASUSFANPAI have the RT-AC5300 and the GT-AC5300. I currently have the RT as the Main, and the GT as the Node connected wirelessly. My questions are: 1. Should the GT be the Main Router? - More Memory? Does it really make a difference? 2. What are the recommended settings for this configuration? 3...
-
- 33 Posts - outlaw78Hello, I just bought an Asus rt-ac5300 router and have a couple of questions. Is there a way to see packet information? Specifically, a counter that shows dropped/collisions on both lan ports and wireless? The system log is not my cup of tea. I had an old dlink (DIR-655) router that... -
W- 5 Posts - WhiteHawk7Basically I'm wondering if I can extend the range of my network by having: router--node--node (the last node is not within range of the primary, only the 1st node). Thank you.
-
F- 5 Posts - florrepusI am a ”semi-professional” Asus user. I have been using Asus routers for more than 5 years; I have +10 various Asus routers. In a large two floor flat with thick concrete floor and lost of brick walls, I was using one AC66U A1. It covered most of the first floor and parts of the second floor...
-
E- 3 Posts - EzPzHello everybody, Let me explain my situation first: I rent a fairly large room within a 2,800 sqft, 1 floor house. Currently we have two RT-N66Us, one as the main router, and the other as a repeater (the owner doesn't want ethernet cables running through his house). Most of the devices in the...
-
S- 14 Posts - Salvador SantolucitoI've got the first AC68 in the middle of my house and the second AC68 on the side. I've got ethernet cables routed to both of those routers. I have the second AC68 working as a mesh node now. But from what I've read, it doesn't sound like plugging the ethernet cable into it will matter. And...
-
K- 43 Posts - kaze72Hi! I already had an RT-AC68U and I bought another one, to set up a AiMesh network. I have followed the instructions, both official and unofficial, very very carfully. The router never finds the node. I have done the process many times now, and factory reset both router and node (several...
-
- 6 Posts - Chris StarrHello I am new to these forums I have an Ac5300 I am using as my main router. I recently purchased a AC1900 AC 68U to set as my mesh node. Unfortunately, after reading many guides and youtube videos (all specified steps have been completed) I can not find the aimesh node in the gui. Sometimes... -
S- 4 Posts - santilloluHi to All, I want to ask how can i restart a single router in aimesh network? I also want to have a guest wifi shared by the aimesh connection, but seems not working in the other router except the main one. Anyone have an idea how to do those 2 things done? thanks in advance
-
- 1 Posts - PaulKempHi all. Its been some years since I read and update my home networking devices. Currently have a RT-N66U that has been working great. No issues with it since i got it, but the coverage in my house is too poor. Setup: 5 wired into the N66U via switches. 4 sonos devices using 2.4 GHz network... -
N- 1 Posts - Nathan87Hello! First post here, but I've been reading and researching for a while. I recently updated my home networking hardware. My primary router is now an RT-88u and I have an RT-68p set up as an aimesh node (wireless). My throughout is good, but I've noticed quite a bit of latency on my network...
-
M- 2 Posts - Mine Onghi all, I am new to AiMesh so my problem may be trivial to some. I seek your help in setting up a print server on AiMesh node. I have 2 AC68U (converted from TM-1900) and have set them up as AiMesh Router and Node respectively. One thing I noticed immediately is that I lose direct control of...
-
T- 14 Posts - tnemrapI have an AC5300 unit and i want to buy an additional unit to run AIMesh to get better coverage upstairs. Does someone have any recommendation on what unit i should buy. /Mike
-
A- 3 Posts - AlphaGatorI just bought an AC3100 and the links to download AiMesh fw are going to a blank page, then redirecting to the general product page. Will the fw that it automatically downloads have AiMesh?
-
A- 3 Posts - adambeanHey all, I use an AC66u as an access point to my AC5300, both on Merlin (380.69_2). I see that the official firmware now supports AiMesh on the AC5300, but all references to the AC66u appear to be for the B1 model only. I don't believe I have this as I bought the AC66u the day it came out and...
-
J- 1 Posts - John ReyesHello everyone, Newbie here. After a few weeks, I finally got my aimesh setup with 2 converted TM-AC1900 routers working, thanks to this forum. Now my problem is getting the attached USB3 portable drive working on the network. With the old T-Mobile firmware, I never had a problem with UPNP...
-
- 44 Posts - ShinyRobotI'm brand new to home networking but realized I should upgrade my system when I learned Apple would discontinue their routers. I replaced 2 Airport Extremes with 2 ASUS RT-AC88U and basically dropped them inline connected with ethernet and switches where the Airports were: [Modem] -->...
-
P- 4 Posts - pqb2011I've converted some T-Mobiles to 68U's running Advanced Tomato and I would like to move to AIMesh. I was *hoping* I could simply cross-flash from Tomato; no success. I also tried flashing MerlinWRT at the Mini-CFE web server(?), which simply re-initializes my Tomato install. I assume, then, I...
-
S- 2 Posts - Simon5Previously I had two rt-ac68U's both in AP mode, one in the basement and one on the first floor. They were both ethernet connected to the router via a patch panel and switch. The router was the one provided by the ISP. I was getting speeds on both Asus routers of around 350Mbps. I've just...
-
R- 1 Posts - Raymond SvensrudHi, I have a three floor house, it's cables between the floors, unfortunaly not in the rooms i need them to be and i don't want to do the cabeling. I therefor today, run Amplifi HD mesh routers from second floor, connecting to a mesh router in the office on the third floor where there are no...
-
L- 11 Posts - LarsToday i have Netgear Orbi WiFi System (RBK53) AC3000 Router + 2 Satellites. My trial period will start Friday next week, which means I have to send back before Friday next week if I do not want netgear, I've tried Asus Lyra and Linksys well not quite happy, so last I have now Netgear, but then...
-
M- 3 Posts - max789Hi, all I remember reading years ago that, when using a second wireless router as a repeater, the connection between the main router and the repeater is not encrypted. Am I mistaken or have things changed? Are the following two types of wireless connection encrypted via WPA2? 1 Between main...
